• Title/Summary/Keyword: $C^*$-매개변수

Search Result 323, Processing Time 0.027 seconds

Adsorption Isotherms of 2-deoxyuridine (dUrd) and 2-deoxycytidine (dCyd) by Static Method (정적 방법에 의한 2-deoxyuridine(dUrd)과 2-deoxycytidine(dCyd)의 흡착 평형식)

  • Lee, Kwang-Jin;Lee, Sang-Hoon;Row, Kyung-Ho;Um, Byung-Hun
    • Korean Journal of Food Science and Technology
    • /
    • v.40 no.1
    • /
    • pp.111-114
    • /
    • 2008
  • Adsorption isotherm with the most fundamental information related to chromatography process is obtained experimentally. The adsorption isotherm of 2-deoxyuridine (dUrd) and 2-deoxycytidine (dCyd) with ${\mu}$-Bondapak $C_{18}$, static method was adopted in RP-HPLC. The concentrations of mobile and stationary phases were measured with different initial concentrations of dUrd and dCyd, 1, 3, 5, 7, 10 mg/mL, respectively. The adsorption isotherm data were applied by Freundlich, Langmuir, Sips, and Radke-Prausnitz model equations. As a result of the regression analysis, standard error between adsorption isotherm of dUrd and Radke-Prausnitz equation was very low, and adsorption isotherm of dCyd was in an agreement with Sips equation very well.

Advanced Region Slopes Method to Reduce Code Tracking Bias in Future Global Navigation Satellite Systems (부호동기 추적편이 보상을 위한 이른영역기울기 기법)

  • Yoo, Seung-Soo;Lee, Young-Yoon;Kim, Yeong-Moon;Kim, Sun-Yong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.10C
    • /
    • pp.1016-1023
    • /
    • 2009
  • In this paper, a tracking bias compensation method is proposed for future global navigation satellite systems (GNSSs). It is observed that the correlation function of a GNSS signal has many peaks and remains almost unchanged in the advanced offset region as a result of the multipath signals arriving at the receiver later than a line-of-sight signal. Based on these observations, we use the slopes in the advanced offset region to compensate for the code tracking bias, and obtain the maximum code tracking bias, which is essential to implement the proposed scheme, in static multipath environments. Finally, it is demonstrated that the proposed compensation method is very effective for the GNSS signal tracking in terms of the code tracking biases and their running averages.

Improvement of Lipreading Performance Using Gabor Filter for Ship Environment (선박 환경에서 Gabor 여파기를 적용한 입술 읽기 성능향상)

  • Shin, Do-Sung;Lee, Seong-Ro;Kwon, Jang-Woo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.7C
    • /
    • pp.598-603
    • /
    • 2010
  • In this paper, we work for Lipreading using visual information for ship environment. Lipreading is studied for using image information including lips of a speaker at the existing speech recognition system. This technique is a compensation method to increase recognition rate decreasing remarkably in noisy circumstances. Proposed way improved the rate of recognition improving methode of preprocessing using the Gabor Filter for Ship Environment. The experiment were carried out under changing of light with time in the ship environment with lip image. For Comparing with recognition, make a compare with between method of lip region of interest (ROI) before Gabor filtering and after Gabor filtering. In the case of using method of lip ROI before Gabor filtering, the result of the experiments applying to the proposed ways recognition resulting in 44% of recognition.

여명궤도의 반복지상궤적 유지를 위한 궤도최적화 S/W 개발

  • Yun, Jae-Cheol;Jeong, Ok-Cheol;Lee, Byeong-Seon;Hwang, Yu-Ra
    • Bulletin of the Korean Space Science Society
    • /
    • 2009.10a
    • /
    • pp.26.3-27
    • /
    • 2009
  • 한 기의 영상레이더 위성을 이용하여 동일한 촬영지역에 대해 적절한 기선벡터(Baseline)을 유지하는 두 장(scene)의 영상을 획득하여 그 지역의 정밀 표고차를 추출하는 레이더 간섭계(Interferometry) 임무를 수행하기 위해서는 반복지상궤적을 유지하도록 위성의 궤도를 주기적으로 조정해 주어야 한다. 이 연구에서는 반복지상궤적 유지 정밀도를 극대화시키기 위하여 최적의 기준궤도를 생성하고 이를 유지하기 위한 속도증분 및 궤도 조정 일정을 산출할 수 있는 궤도최적화 S/W 를 개발하였다. 이 연구의 최적 궤도 설계 문제는 다음과 같다. "시작시간 $T_0$에서 초기 접촉궤도 상태벡터 (ECEF 위치 및 속도벡터) $x_0$이고, 지상궤적반복주기 p 이후의 시간 $T_0+p$에서도 초기 접촉궤도 상태벡터와 동일한$x_0$가 되도록 궤도를 유지하려고 할 때, 여명 궤도(dawn-dusk and sun-synchronous orbit)에서 운영되는 위성의 연료소모(또는 속도증분)를 최소화시키는 가상의 궤도조정(maneuver) 횟수, 시기, 크기를 찾아라." 이 연구에서는 궤도최적화 문제를 풀기 위하여 GRACE 중력모델(GGM02C)이 적용된 수치적 방법의 위성궤도예측 알고리즘을 시스템 설계에 적용하였고, 매개변수 최적화 방법 중 구속조건이 있는 비선형 최적화 기법의 하나인 연속 2차 계획법(sequential quadratic programming)을 사용하여 해를 구하였다. 개발된 궤도최적화 S/W의 성능을 분석하기 위하여 고도 550km의 여명궤도를 돌며 지상궤적반복주기가 28일인 영상레이더 위성에 대해 적용하였다. 해석 결과를 통해, 비록 시스템의 비선형이 큼에도 불구하고 최소의 속도증분으로 정밀한 반복지상궤적이 유지됨을 알 수 있었다.

  • PDF

Factors Affecting HETP in Capillary Gas Chromatography (모세관 기체 크로마토그래미에서 HETP에 영향을 미치는 인자)

  • 노경호;나영진;정용안
    • KSBB Journal
    • /
    • v.17 no.1
    • /
    • pp.88-92
    • /
    • 2002
  • The election profiles with different flow rates of motile phase were experimentally measured to investigate the effects on HETP in capillary gas chromatography. Based on the correlation coefficient ($r^2$), the first and second moments as well as HETP were determined from the elution cuties, and the parameters used in empirical equations were estimated. The empirical equations were expressed in terms of mobile phase velocity, and the theoretical Golay equation was considered. The samples were d-limonene and perillyl alcohol, potential anticancer agent mainly was contained in the peel of orange. From the experimental results, HETP of the samples were increased with mobile phase velocities. The correlation coefficient of d-limonene was in the range between 0.8265 and 0.8465, while that of perillyl alcohol was between 0.9353 and 0.9374. The total HETP was composed of $H_{g}$, $H_{l}$ and Hc, and Hg had the greatest effect on HETP, but HI showed a negligible effect. In terms of HETP, the optimum velocity of mobile phase was present.

Deformation behavior of tunnels crossing weak zone during excavation - numerical investigation (연약대를 통과하는 터널의 시공중 변위거동 - 수치해석 연구)

  • Yoo, Chungsik;Park, Jung-Gyu
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.16 no.4
    • /
    • pp.373-386
    • /
    • 2014
  • This paper concerns the deformation behavior of tunnels crossing weak zone during excavation. A three dimensional finite element model was adopted in order to conduct a parametric study on the orientation of weaj zone in terms of strike and dip angle relative to the tunnel longitudinal axis. The results of the analyses were then analyzed so that the tunnel displacements in terms of the ratios between the crown settlement and springline displacement can be related to the orientation of the weak zone. The results indicate that the displacement ratios between the tunnel crown and springline tend to quantitatively change when a weak zone exists near or ahead of the tunnel suggesting that the displacement ratios can be effectively used to predict the weak zone during tunnelling. Practical implications of the findings are discussed.

The Mossbauer Spectra Changes Due to the Jahn-Teller Distortion in Sulphur Spinel $Co_{0.95}Fe_{0.05}Cr_2S_4$ (유화 Spinel $Co_{0.95}Fe_{0.05}Cr_2S_4$에서 Jahn - Teller Distortion에 의한 Mossbauer 공명 흡수선의 변화에 관한 연구)

  • 서정철;이민용;고영복
    • Journal of the Korean Magnetics Society
    • /
    • v.7 no.5
    • /
    • pp.225-231
    • /
    • 1997
  • Sulphur Spinel $Co_{0.95}Fe_{0.05}Cr_2S_4$ has been studied with Mossbauer Spectroscopy between 4.2 K and room temperature. The $Fe^{2+}$ ion in a tetrahedral site is the Jahn-Teller active and the dynamic Jahn-Teller distortion starts below the magnetic ordering temperature. The distortion cause a quadrupole shift to appear which increases with decreasing temperature. The magnetic hyperfine field has a maximum at 100 k and then decreases with decreasing temperature. The magnitude of the interaction ratio R between the electric quadrupole and magnetic dipole interaction increases from 0 near the magnetic ordering temperature to 5.4 at 4.2 K. The optimum values of 0, the polar angle of the magnetic hyperfine field with respect to the principle axis of the electric field gradient (EFG) remains zero and the asymmetry of the EFG n is about 0.25. The simulations of Mossbauer spectra coincidence with the experimental results.

  • PDF

Optimization Study for Material Properties of Piezoelectric Material Using Parameter Estimation Method: Part I. Polycrystal PZT Ceramics (매개변수 평가법을 이용한 압전재료의 재료물성 최적화 연구 Part I. 다결정 PZT 세라믹스)

  • Shin, Ho-Yong;Lee, Ho-Yong;Hong, Il-Gok;Kim, Jong-Ho;Im, Jong-In
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.35 no.5
    • /
    • pp.471-479
    • /
    • 2022
  • Recently, piezoelectric devices, such as ultrasonic surgery, ultrasonic atomizer, and ultrasonic speaker, are analyzed and designed by finite element simulation methods. However, the discrepancy between the design and the experiment results of the device typically occurs due to the inaccuracy of the piezoelectric material properties. To improve the simulation accuracy, the material properties of the PZT ceramics were better refined using parameter estimation method. The material parameters are elastic stiffness cEij and piezoelectric constant eij of PZT ceramics. The impedance curve characteristics for the LTE mode of PZT ceramics were calculated. The mismatch between the simulation and the experimental data were compared and minimized by a least square method. Finally, the simulated impedance data were compared with the experimental data for the various vibration modes of PZT ceramics and the optimized material properties of PZT ceramics were verified. To further verify the accuracy, this method was also applied to piezoelectric PMN-PT single crystals.

A Study on Consolidation Characteristic of Dredged Fill Using Geotechnical Centrifuge (원심모형시험에 의한 준설지반의 압밀특성연구)

  • Kim, Hee-Chul;Kim, Heung-Seok;Lee, Song
    • Journal of the Korean Geotechnical Society
    • /
    • v.24 no.10
    • /
    • pp.45-55
    • /
    • 2008
  • In this study, the in-situ model test has been conducted to estimate and analyze consolidation behavior of the ground by using the miniature test that reconstructs economically geotechnical behavior of in-situ full scale structure. To analyze the relation of effective stress, void ratio and coefficient of permeability at the self-weight consolidation stage, the low stress seepage consolidation test has been conducted and the involution function of constitutive equation had been obtained from the result of the curve fitted seepage consolidation test. As a result of the numerical analysis that had been conducted on the representative section using a constitute equation, final settlement was similar to those of self-weight consolidation of the centrifugal model test. But it was more or less smaller. It seems that these trends are caused by the difference between estimated values.

Analysis of Consolidation and Shear Characteristics for the Kwangyang Bay Clay (실내시험을 통한 광양만 점토의 압밀 및 전단특성분석)

  • 이영휘;김용준;김대길
    • Journal of the Korean Geotechnical Society
    • /
    • v.15 no.1
    • /
    • pp.151-160
    • /
    • 1999
  • A series of laboratory tests for the marine clay sampled under the sea of Kwangyang bay have been conducted. The main types of tests are the general index property tests, the oedometer tests and the triaxial compression tests in both undrained(CIU) and drained(CID) conditions. The clayey samples, classified as CL, CH with natural water content of 38.3~84.6% and liquidity index of 0.71~0.98, are in the normally consolidated state with O.C.R. of 1.0l~l.60. The undrained stress path from CIU tests can be normalized with isotropic consolidation pressure$(p_0)$ and equal shear strain contour is linear passing through the origin in the (q, p) plot. The undrained shear strain is found to be the only function of the stress ratio($\eta$) and linear with intercept in the ($\varepsilon/\eta,\eta$) plot. The built-up pore pressure normalized with pc is also linear with respect to $\eta$. and its slope is defined by ´C´ as a pore pressure parameter. Equations to predict the undrained stress path and the shear strain are proposed. It is proved that the proposed equations give better agreements to the measured values than the Cam-clay theories. The failure points of the stress path are located on the same C.S.L. in (q, p) plot during both CIU and CID tests, which justifies the concept of critical state theory.

  • PDF