• 센서학회지
• /
• 제25권6호
• /
• pp.440-446
• /
• 2016

This study introduces the characteristics of current-voltage (I-V) and impedance variance for $ZnO-Zn_2BiVO_6-Co_3O_4$ (ZZCo), which is sintered at $900^{\circ}C$, according to temperature changes. ZZCo varistor demonstrates dramatic improvement of non-linear coefficient, ${\alpha}=66$, with lower leakage current and higher insulating resistivity than those of ZZ ($ZnO-Zn_2BiVO_6$) from the aspect of I-V curves. While both systems are thermally stable up to $125^{\circ}C$, ZZCo represents a higher grain boundary activation energy with 1.05 eV and 0.94 eV of J-E-T and from IS & MS, respectively, than that of ZZ with 0.73 eV and 0.82 eV of J-E-T and from IS & MS, respectively, in the region above $180^{\circ}C$. It could be attributed to the formation of $V^*_o$(0.41~0.47 eV) as dominant defect in two systems, as well as the defect-induced capacitance increase from 781 pF to 1 nF in accordance with increasing temperature. On the other hand, both the grain boundary capacitances of ZZ and ZZCo are shown to decrease to 357 pF and 349 pF, respectively, while the resistances systems decreased exponentially, in accordance with increasing temperature. So, this paper suggests that the application of newly formed liquid phases as sintering additives in both $Zn_2BiVO_6$ and the ZZCo-based varistors would be helpful in developing commercialized devices such as chips, disk-type ZnO varistors in the future.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.178-184
• /
• 1999

We have measured I-V characteristics of Bi$_2Sr_2CaCu_2O_{8+{\delta}}$ mesa containing a small number of intrinsic stacked Josephson junctions in a magnetic field. We fabricated mesa with an area of 40${\times}$40 ${\mu}$m$^2$ containing 3${\sim}$20 intrinsic junctions. We applied magnetic field perpendicular to He CuO$_2$ planes up to 5T. We observed flux-flow branches and flux-flow steps in the I-V characteristics which might be due to collective motion of Josephson vortices in the long junction limit. In a parallel field, critical current I$_c$ varies as I$_c$(B) ${\sim}$ exp(-B/B$_0$), where B$_0$ is about 2T, which is consistent with the theoretical model. DC and AC intrinsic Josephson effects are also discussed.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.530-538
• /
• 2003

110 K 상의 산화물 고온초전도체를 B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+}$$\delta$의 출발조성비로 고상반응법에 의해 합성하였다. 합성된 Bi계 110 K 상의 산화물 고온초전도 물질을 다시 분말 상태로 만든 후, MgO 금속산화물 분말을 5~50 wt%의 각 비율로 혼합하였다. MgO 금속산화물 분말이 혼합된 시편들을 820~86$0^{\circ}C$로 24시간동안 최종 소결시켰다. 그 후, 각 시편들에 대하여 x-선, $T_{c}$, SEM 등을 측정하여 MgO 금속산화물 혼합량에 대한 초전도특성 및 표면의 입자 크기 변화 등에 대한 조사를 진행하였다. MgO 금속산화물의 혼합량이 증가됨에 따라 MgO 관련 피크들의 강도 및 2212 상들의 피크들의 비율은 증가되었고, 시편 내 2223 상의 비율은 감소하고 2212상의 비율은 증가되었다.다.은 증가되었다.다.

• Journal of applied mathematics & informatics
• /
• 제32권3_4호
• /
• pp.405-426
• /
• 2014

The concept of interval-valued (${\alpha},{\beta}$)-fuzzy ideals, interval-valued (${\alpha},{\beta}$)-fuzzy generalized bi-ideals are introduced in LA-semigroups, using the ideas of belonging and quasi-coincidence of an interval-valued fuzzy point with an interval-valued fuzzy set and some related properties are investigated. We define the lower and upper parts of interval-valued fuzzy subsets of an LA-semigroup. Regular LA-semigroups are characterized by the properties of the lower part of interval-valued (${\in},{\in}{\vee}q$)-fuzzy left ideals, interval-valued (${\in},{\in}{\vee}q$)-fuzzy quasi-ideals and interval-valued (${\in},{\in}{\vee}q$)-fuzzy generalized bi-ideals. Main Facts.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.99-103
• /
• 2001

We have conducted two runs of interlaboratory comparison on Ag-sheathed Bi-2223 tapes to evaluate the level of measurement techniques for the critical current measurement. Two classes of specimens were prepared for parallel and serial routings and sent to four participating laboratories. The critical currents of specimens were measured at 77 K in zero magnetic field. In the first comparison, we used twenty different Bi-2223 tapes as specimens for comparison and participating laboratories measured the specimens using their own instruments and procedures. As a result, the scattering of data on the first comparison showed -3.0% to +l2.2% for the parallel routing and -0.7% to +l5.1% for the serial routing. Major sources of these variations were attributed to different measurement techniques. Thus, the second comparison of measurement was done on the same specimens under specified measurement conditions, particularly in terms of cooling procedure and sweep rate of the test current. The variations for the second comparison were decreased -3.1% to +3.2% far the parallel routing and -1.8% to +7.7% fur the serial routing.

• 한국재료학회지
• /
• 제3권5호
• /
• pp.497-504
• /
• 1993

기본조성 52.5mol% $Fe_2O_3$, 25.5mol% MnO, 22mol% ZnO로 구성된 Mn-Zn페라이트에 $Bi_2O_3$ 및 $CaCO_3$을 각각 0.02, 0.05wt%첨가한 시편에 대해서 $Ta_2O_5,ZrO_2$및 $SiO_2$의 미량 첨가한 따른 미세구조와 자기적 특성변화를 조사하였다. $Ta_2O_5,ZrO_2$첨가에 따라 결정립 크기가 감소되었고, 전기시 균일한 입자로 형성된 미세구조를 가진 재료를 얻었다. $SiO_2$첨가에 따라 결정립의 이상성장이 관찰되었고 소결밀도, 전기저항, 초투자율은 감소하고 고주파 영역에서 상대손실이 증가되었다. 본 연구결과 초투자자율은 균일한 결정립에서 최대의 값을 가지며 0.02wt%$Bi_2O_3$, 0.05wt%$CaCO_3$, 0.1wt%$Ta_2O_5$ 첨가시편의 경우 10kHz, $25^{\circ}C$에서 초투자율($\mu_i$)은 6260이고 상대손실 계수(tan$\delta /\mu_i$)는 $4.2 \times 10^{-6}$ 인 높은 투자율과 낮은 손실 특성을 가진 자성재료를 얻었다.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.520-527
• /
• 1999

열전 소결재 제조의 새로운 시도로, 분말의 압출과 소결을 동시에 할 수 있는 공정에 대하여 연구하였다. $(Bi,Sb)_2(Te,Se)_3$계 압출-소결재를 제조함에 있어 제조 변수를 적절히 조절하여 건전한 표면과 미세조직을 갖는 고밀도의 소결재를 얻을 수 있었다. p형 재료의 경우 Te 도핑량이 증가함에 따라 Seebeck 계수가 증가하였으며 3 at% Te을 첨가한 경우 상온에서의 열전 성능 지수가 $2.5\times10^{-3}/K$를 나타내었다. 한편 n형 재료의 경우 0.16 mol% $SbI_3$를 도핑한 시편에서 $1.8\times10^{-3}/K$의 열전 성능지수를 보였다. p형 및 n형 재료 모두 압출 방향에 수직한 방향보다 평행한 방향으로의 운반자 이동도와 열전 성능지수가 높게 나타났다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권5호
• /
• pp.204-210
• /
• 2005

Alternating current (AC) losses of two Bi-2223 ([Bi, Pb]: Sr: Ca: Cu: O = 2:2:2:3) tapes [(Tape I, un-twist-pitch) and the other with a twist-pitch of 10 mm (Tape II)] were measured and compared. These samples, produced by the powder-in-(Ag) tube (PIT) method, are multi-filamentary. Also, it's produced by non-twist and different twist pitch (8, 10, 13, 30, 50 and 70 mm). The critical current measurement was carried out under the environment in liquid Nitrogen and in zero-field by 4-probe method. Susceptibility measurements were conducted while cooling in a magnetic field. Flux loss measurements were conducted as a function of ramping rate, frequency and field direction. The AC flux loss increases as the twist-pitch of the tapes decreased, in agreement with the Norris Equation. Neutron-diffraction measurements have been carried out investigate the crystal structure, magnetic structures, and magnetic phase transitions in Bi-2223([Bi, Pb]:Sr:Ca:Cu:O)

• E2M - 전기 전자와 첨단 소재
• /
• 제7권4호
• /
• pp.281-288
• /
• 1994

According to spread volume of B(BiPbCuO) layer, composition ratio and each stage of sintering process, we studied stability of high Tc superconductor phase and generation and growth movement of superconducting phase. The dual layer composed of SrCaCuO and BiPbCuO compound were prepared to develop the Bi-2223 superconductor[108K] through interaction and diffusion during sintering process. The dual layer samples were sintered at 830.deg. C for 0-210 hours. From the result, the optimum conditions were : spread volume(A:B=1:0.6), sintering time(210h) and composition ratio(A:S $r_{2}$C $a_{2}$C $u_{2}$- $O_{x}$, B:B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$) at 830.deg. C.. C.C.C.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.915-921
• /
• 1995

The morphotropic phase boundary and phase transitions of the solid solutiion system, (1-x)(Na1/2Bi1/2)TiO3-PbTiO3＋xPbTiO3 were studied by investigating changes in crystal structure, variations in permittivity with temperature, and calorimetric behavior. It was observed that the morphotropic phase boundary (MPB) of this solid solutiion system was at near 14 mol% of PbTiO3. Compositions containing less than 10mol% PbTiO3 (x<0.1) exhibited a phase transition, i.e. ferroelectric rhombohedrallongrightarrowparaelectric paraelectric cubic, with increasing temperature. Composition containing more than 14 mol% PbTiO3 (x 0.14) showed a phase transition from ferroelectric tetragonal to paraelectric cubic. In the composition range of 0.1$\varepsilon$ (T) curve, which coincided with a phase transition from ferroelectric rhombohedral to an intermediate phase, was also found.