• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3265-3271
• /
• 2010

A series of 6,7,8,9-tetrahydro-5H-5-hydroxyphenyl-2-benzylidine-3-substituted hydrazino thiazolo (2,3-b) quinazolines have been synthesized to meet the structural requirements essential for anti-inflammatory and antinociceptive properties. The synthesized series of heterocycles, 6,7,8,9-tetrahydro-5H-5-hydroxyphenyl-2-benzylidine-3-substituted hydrazino thiazolo (2,3-b) quinazoline by the reaction of 6,7,8,9-tetrahydro-5H-5-hydroxy phenyl thiazolo (2,3-b) quinazolin-3(2H)-one with appropriate hydrazine hydrate and ketones/aldehydes in the presence of anhydrous sodium acetate and glacial acetic acid as presented in Scheme 1. Their antinociceptive activity were evaluated by tailflick technique, anti-inflammatory was evaluated by carrageenan-induced paw edema test and their ulcerogenicity index determined by reported protocol. The compounds exhibited the lowest ulcer index ($0.51{\pm}1.63$, $0.48{\pm}1.28$ and $0.50{\pm}1.53$, respectively. The 6,7,8,9-tetrahydro-5H-5-hydroxy phenylhydroxy-2-benzylidine-3-(N'-3-pentylidenehydrazino) thiazolo (2,3-b) quinazoline and 6,7,8,9-tetrahydro-5H-5-hydroxy phenyl-2-benzylidine-3-(N'-2-pentylidene-hydrazino) thiazolo (2,3-b) quinazoline exhibited the most potent antinociceptive and anti-inflammatory activities.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.140-147
• /
• 1985

Seventy four Holstein heifers were randomly assigned over three trials to PRID-7+PG-6 and Synchromate B-9 regimens to synchronize estrus cycle for embryo transfer. Sexual behaviors; moounting, standing, orientation, chin-resting, sniffing, licking, rubbing and butting, vaginal swelling and mucus discharge were observed between 06-08, 12-14 and 18-20 h on 1st day and 00-02, 06-08, 12-14 and 18-20 h on 2nd day after removal of hormones. Synchromate-B treatment (81.6%) showed higher synchronized estrus rate than PRID treatment (77.8%) during observation period. Standing estrus was observed within 74 h after PG injection in PRID and within 52 h after removal of implant in Synchromate-B. About 68% of heifers in PRID and 74% of heifers in Synchromate-B showed standing estrus between 0-14 h on 2nd day after removal of the hormones. Synchromate-B resulted in a tighter synchrony of standing estrus than PRID. Incidence of average mounting and standing per head during observation period was 22.3 and 16.6 in PRID and 28.1 and 13.6 in Synchromate-B. The PRID showed peak in active mounting at 18-20 h on 1st day, however, the Synchromate-B showed at 0-2 h on 2nd day after removal of hormone. Active standing was shown between 18 h on 1st day to 20h on 2nd day in PRID, however, between 0-14 h on 2nd day after removal of hormone is Synchromate-B. There was slight difference in pattern of active mounting and standing during estrus between PRID and Synchromate-B. Conception rate of synchronized heifers transferred with fresh and frozen embryos by non-surgical and surgical methods was higher in synchromate-B (62.5%) than in PRID (38.5%). Chin-resting showed highest incidence among 6 sexual behavioral components in the both treatments. Synchromate-B showed higher incidence of chin-resting (16.6) than PRID (10.7). Synchromate-B group showed also higher incidence of orientation, sniffing and butting than PRID group. Synchromate-B resulted in more active sexual behaviors than PRID. The pattern of incidence of chin-resting, licking and butting was almost symmetrical in PRID with their peak values at 6-8 h on 2nd day, however in Synchromate-B chin-resting and sniffing was symmetrical with their peak values at 12-14 h on 2nd day after removal of hormone. There was tendency to increase vaginal swelling according to time passage of synchronized estrus in the both treatments. Incidence of mucus discharge in Synchromate-B was slightly higher than in PRID. Twenty to 40% was false negative in conception rate by tall painting before re-estrus day as judged by rectal palpation.

• YAKHAK HOEJI
• /
• v.50 no.6
• /
• pp.403-408
• /
• 2006

1-Amino-5,6-dimethoxyindan hydrochloride was synthesized from 3- (3,4-dirnethoxyphenyl)propionic acid by intramolecular Friedel-Crafts acylation, oximation with hydroxylamine, and reduction with an overall yield of 74%. 2-Amino-5,6-dimethoxyindan hydrochloride was synthesized from 3-(3,4-dirnethoxyphenyl)propionic acid by intramolecular Friedel-Crafts acylation, oximation with isoamylnitrite, reduction in NaOH and reaction with HCI to form 5,6-dimethoxy-2-indanone, which was reacted with hydroxylamine and reduced with an overall yield of 42%. 5,6-Dimethoxyindan-1,2-dione-2-oxime, which was catalytically hydrogenated to afford cis-, and trans-1-amino-5,6-dimethoxyindan-1-ol as 3 : 1 ratio. This mixture was treated with Li and reacted with chloroacetyl chloride. Cis isomer was acylated and cyclized to synthesize rir -( ${\pm}$ )-7,8-dimethoxy-4,4a,5,9b-tetrahydroindeno[1,2-b][1,4]oxazin-3(2H)-one, but trans isomer was just acylated to form amide.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.229-233
• /
• 2011

Phase evolution during the hydrogen-assisted disproportionation of $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy was investigated mainly by using a magnetic balance-type thermomagnetic analyser (TMA). In order to avoid any undesirable phase change in the course of heating for TMA, a swift TMA technique with very high heating rate (around 2 min to reach $800^{\circ}C$ from room temperature) was adopted. The hydrided $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy started to be disproportionated in hydrogen from around $600^{\circ}C$, and the alloy after the early disproportionation (from 600 to $660^{\circ}C$) has been partially disproportionated. The partially disproportionated alloy consisted of a mixture of $NdH_x$, $Fe_3B$, ${\alpha}$-Fe, and the remaining undisproportionated $Nd_2Fe_{14}BH_x$-phase. During the subsequent heating to $800^{\circ}C$ in hydrogen, two additional phases of $Fe_{23}B_6$ and $Fe_2B$ were formed, and the material consisted of a mixture of $NdH_x$, $Fe_{23}B_6$, $Fe_3B$, $Fe_2B$, and ${\alpha}$-Fe phases. During the subsequent isothermal holding at $800^{\circ}C$ for 1 hour, the phase constitution was further changed, and one additional unknown magnetic phase was formed. Eventually, the fully disproportionated $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy consisted of $NdH_x$, $Fe_{23}B_6$, $Fe_3B$, $Fe_2B$, ${\alpha}$-Fe, and one additional unknown magnetic phase.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.585-589
• /
• 2012

The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.19-24
• /
• 2017

Cryogenic milling which is a combined process of low-temperature treatment and mechanical milling was applied to fabricate high critical current density $(J_c)MgB_2$ bulk superconductors. Liquid nitrogen was used as a coolant, and no solvent or lubricant was used. Spherical Mg ($6-12{\mu}m$, 99.9 % purity) and plate-like B powder (${\sim}1{\mu}m$, 97 % purity) were milled simultaneously for various time periods (0, 2, 4, 6 h) at a rotating speed of 500 rpm using $ZrO_2$ balls. The (Mg+2B) powders milled were pressed into pellets and heat-treated at $700^{\circ}C$ for 1 h in flowing argon. The use of cryomilled powders as raw materials promoted the formation reaction of superconducting $MgB_2$, reduced the grain size of $MgB_2$, and suppressed the formation of impurity MgO. The superconducting critical temperature ($T_c$) of $MgB_2$ was not influenced as the milling time (t) increased up to 6 h. Meanwhile, the critical current density ($J_c$) of $MgB_2$ increased significantly when t increased to 4 h. When t increased further to 6 h, however, $J_c$ decreased. The $J_c$ enhancement of $MgB_2$ by cryogenic milling is attributed to the formation of the fine grain $MgB_2$ and a suppression of the MgO formation.

• Korean Journal of Crystallography
• /
• v.15 no.1
• /
• pp.35-39
• /
• 2004

Two new nickel vanadium borophosphate cluster compounds, $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (1) and $(NH_4)_{3.5}(C_3H_{12}N_2)_{3.5}[Ni(H_2O)_6]_{1.25}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (2) have been synthesized and structurally characterized. Inter-diffusion methods were employed to prepare the compounds. The cluster anion $[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6$ is used as a building unit in the synthesis of new compounds containing $Ni(H_2O){^{2+}_5}$ in the presence of pyrazine and 1,3-diaminopropane. Compounds contain isolated cluster anions with general composition ${[Ni(H_2O)_5]_n[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6}^{-(17-2n)}$ (n = 2, 4). Crystal data: $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$, monoclinic, space group C2/m (no. 12), a = 27.538(2) ${\AA}$, b = 20.366(2) ${\AA}$, c = 11.9614(9) ${\AA}$, ${\beta}$ = 112.131(1)$^{\circ}$, Z = 8; $(NH_4)_{3.5}(C_3H_{12}N_2)_b[Ni(H_2O)_6]_{3.5}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$, triclinic, space group P-1 (no. 2), a = 17.7668(9) ${\AA}$, b = 17.881(1) ${\AA}$, c = 20.668(1) ${\AA}$, ${\alpha}$ = 86.729(1)$^{\circ}$, ${\beta}$ \ 65.77(1)$^{\circ}$, ${\gamma}$ = 80.388(1)$^{\circ}$, Z = 2.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.77-81
• /
• 1998

By standardized method, Bacillus subtilis BGA, Bacillus cereus var. mycoides ATCC 11778, and Micrococcus luteus ATCC 9341 were seeded on the muller hinton agar (Difco) plate, and pH was adjusted to 6.0, 7.2, and 8.0. Five agar plates, B. subtilis (pH 6.0), B. cereus (pH 6.0), B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0), were employed as test plates of modified EEC 4-plate method. Oxytetracycline (OTC) with a diet was orally administered to flounder, Paralichthys olivaceus, at 100 mg/kg once a day. After oral administration, modified EEC 4-plate method by the three screening test using muscle-direct, extraction-disk and direct-disk methods was conducted for 3 fish at 1, 3, 5, 10, 15, 20, 25 and 30 days. Muscle-direct treatment of B. subtilis (pH 6.0) was found to be dubious positive (${\pm}$) at the 1st day after the administration; thereafter, it was found to be negative to the last day of the experiment. Extraction-disk and direct-disk treatment of B. subtilis (pH 6.0) were found to be negative from the 1st day to the last day after the administration. B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0) by the three screening tests, were found to be negative all the way after the administration. On the other hand, B. cereus (pH 6.0) by the three screening tests was clearly found to be positive for the first 15 days after the administration, and then muscle-direct and direct-disk treatment of B. cereus (pH 6.0) were found to be dubious positive at 20th days after the administration. However extraction-disk treatment of B. cereus (pH 6.0) was clearly found to be negative at the same stage; thereafter, the three screening tests of B. cereus (pH 6.0) were found negative to the last of the experiment. These findings showed that to have equal sensitivity to those determination for the residual detection of OTC, and also confirmed that B. cereus was effective test organism for the monitoring of OTC.

• Journal of the Korean Ceramic Society
• /
• v.28 no.7
• /
• pp.517-524
• /
• 1991

The CVD process of BPSG (BoroPhosphoSilicate Glass) and its thin film properties were studied. B2H6, PH3, SiH4 and O2 gases were reacted in a AP (Atmospheric Pressure) CVD system in the temperature range of 300℃ and 460℃. The interaction of B2H6 and PH3 was studied from the deposition rate and dopant incorporation change point of view. The dependency of BPSG step coverage on the temperature was changed with different O2/(B2H6+PH3+SiH4) ratio. Finally, the boundary which distinguishes the stable BPSG's from the ones that react with Di (Deionized) water or cleaning chemicals such as H2SO4, HCl, H2O2, NH4OH etc could be defined.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.739-742
• /
• 2001

Reactions of [Cp*Ir(η3-CH2CHCHPh)(NCMe)]OTf (1) with HC≡CR (R = H, CH2OH) in the presence of bases, B (B=NEt3, PPh3, AsPh3) produce stable Cp*Ir-η3-allyl-alkenyl compounds [Cp*Ir(η3-CH2CHCHPh)(-CH=CH-+B)]OTf (2) and [Cp*Ir(η3-CH2CHCHPh)(-C(CH2OH)=CH- +PPh3)]OTf (3), respectively in high yields. Cp*Ir-η3-allyl-alkynyl compounds Cp*Ir(η3-CH2CHCHPh(-C≡C-R') (4) and Cp*(η3-CH2CHCHPh)Ir-C≡C-p-C6H4-C≡C-Ir(η3-CH2CHCHPh)Cp* (5) have been prepared from reactions of 1 with HC≡CR'(R' = C6H5, p-C6H4CH3, C3H5, C6H9) and HC≡C-p-C6H4-C≡CH in the presence of NEt3.