• Journal of Navigation and Port Research
• /
• v.30 no.2
• /
• pp.167-172
• /
• 2006

In this paper, the issue of blind detection of Alamouti-type differential space-time (ST) ${\pi}/2$-shifted BPSK modulation in static Rayleigh fading channels is considered. We introduce a novel transformation to the received signal from each receiver antenna such that this binary ST modulation, which has a second-order transmit-diversity, is equivalent to QPSK modulation with second-order receive-diversity. The pre-detection combining of the result of transformation allows us to apply a low complexity detection technique specifically designed for receive-diversity, namely, scalar multiple-symbol differential detection (MSDD). With receiver complexity proportional to the observation window length, our receiver can achieve the performance 1.5dB better than that of conventional differential detection ST and 0.5dB worse than that qf a coherent maximum ratio combining receiver (with differential decoding) approximately.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3683-3703
• /
• 2018

Wireless sensor networks (WSNs) consist of set of sensor nodes. These sensor nodes are deployed in unattended area which are able to sense, process and transmit data to the base station (BS). One of the primary issues of WSN is energy efficiency. In many existing clustering approaches, initial centroids of cluster heads (CHs) are chosen randomly and they form unbalanced clusters, results more energy consumption. In this paper, an energy efficient clustering protocol to prevent unbalanced clusters based on firefly and midpoint algorithms called EEC-FM has been proposed, where midpoint algorithm is used for initial centroid of CHs selection and firefly is used for cluster formation. Using residual energy and Euclidean distance as the parameters for appropriate cluster formation of the proposed approach produces balanced clusters to eventually balance the load of CHs and improve the network lifetime. Simulation result shows that the proposed method outperforms LEACH-B, BPK-means, Park's approach, Mk-means, and EECPK-means with respect to balancing of clusters, energy efficiency and network lifetime parameters. Simulation result also demonstrate that the proposed approach, EEC-FM protocol is 45% better than LEACH-B, 17.8% better than BPK-means protocol, 12.5% better than Park's approach, 9.1% better than Mk-means, and 5.8% better than EECPK-means protocol with respect to the parameter half energy consumption (HEC).

• Investigative Magnetic Resonance Imaging
• /
• v.24 no.3
• /
• pp.95-122
• /
• 2020

In this article, we evaluated the performance of radiofrequency (RF) coils in terms of the signal-to-noise ratio (S/N) and homogeneity of magnetic resonance images when used for ultrahigh-frequency (UHF) 7T magnetic resonance imaging (MRI). High-quality MRI can be obtained when these two basic requirements are met. However, because of the dielectric effect, 7T magnetic resonance imaging still produces essentially a non-uniform magnetic flux (|B₁|) density distribution. In general, heterogeneous and homogeneous RF coils may be designed using electromagnetic (EM) modeling. Heterogeneous coils, which are surface coils, are used in consideration of scalability in the |B₁| region with a high S/N as multichannel loop coils rather than selecting a single loop. Loop coils are considered state of the art for their simplicity yet effective |B₁|-field distribution and intensity. In addition, combining multiple loop coils allows phase arrays (PA). PA coils have gained great interest for use in receiving signals because of parallel imaging (PI) techniques, such as sensitivity encoding (SENSE) and generalized autocalibrating partial parallel acquisition (GRAPPA), which drastically reduce the acquisition time. With the introduction of a parallel transmit coil (pTx) system, a form of transceiver loop arrays has also been proposed. In this article, we discussed the applications and proposed designs of loop coils. RF homogeneous coils for volume imaging include Alderman-Grant resonators, birdcage coils, saddle coils, traveling wave coils, transmission line arrays, composite right-/left-handed arrays, and fusion coils. In this article, we also discussed the basic operation, design, and applications of these coils.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.141-141
• /
• 2019

토양수분은 수문 분석에 있어 매우 중요한 인자 중 하나이며 최근 기후변화로 인한 가뭄, 홍수 및 산불발생과 같은 물 관련 재해 발생에 직 간접적으로 영향을 미치기 때문에 지표 토양수분산정은 매우 중요하다. Sentinel-1 SAR(Synthetic Aperture Radar)는 능동형 위성으로 10m의 공간해상도로 제공되기 때문에 기존의 토양수분 전용위성인 SMOS(Soil Moisure and Ocean Salinity), SMAP(Soil Moisture Active Passive) 및 GCOM-W1(Global Change Observation Mission Water) 등 다르게 고해상도 토양수분 산정이 가능하다. 그러나 Sentinel-1 SAR 센서에서는 고해상도 지표 관측 이미지 자료만 제공하며, 토양수분 자료를 직접적으로 제공하지 않는다. 따라서 본 연구에서는 2018년도 Sentinel-1 A/B IW(Interferometric Wide swath) 모드의 VH(Vertical Transmit - Horizontal Receive) 편파 영상과 Sentinel-1 SAR 위성자료 전처리 도구인 SNAP(Sentinel Application Platform)을 이용하여 후방산란계수를 산정하였으며, 산정된 후 방산란계수와 농촌진흥청에서 제공하는 65개 지점의 실측 TDR(Time Domain Reflectrometry) 토양수분의 관계를 이용하여 회귀모형을 도출 및 토양수분 공간분포를 산정하였다. 비록 불확실성은 어느정도 발생 하였으나, 전체적으로 TDR 관측값과 $10m{\times}10m$ 해상도의 Sentinel-1 SAR 기반 토양수분이 일치하는 경향을 보였다. 본 연구 결과는 수문, 농업, 산림, 재해 등 다양한 분야에 활용될 수 있을 것으로 판단된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.117-124
• /
• 2004

With MPEG-4 3D mesh coding(3DMC), the problem of the need of a wide bandwidth can be solved to store and transmit 3D information because of its high compression rate. And to realize the 3D information service with broadcasting or internet, one needs to transmit not only the 3D contents but also the 3D player. Therefore, in this paper we implement a 3D player based on MPEG-4 using a java language. A well-known java language employed in this paper provides the player with a wider range of applications, for example, when the O/S or the platform are different, due to its properties of scalability and universality. The implemented player which has functions (translation, rotation, etc) that can manipulate contents decodes the 3D contents and displays them. In addition, the player has a network function that receives a 3D content from the server. This paper explains the architecture and characteristics of the player and shows its simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.97-104
• /
• 2017

In this paper, we designed and fabricated the multi band Transceiver Assembly(TCA) for the Multi Channel Synthetic Aperture Radar(MCSAR) containing C-band, X-band, Ku-band and we researched to verify electrical performance of TCA. The transceiver consists of transmitters, receivers, signal selection modules for each band, and stability oscillator, frequency synthesizer, controller, power distributor. The transceiver has a receive path selection and bandwidth selection functions in accordance with the operating mode. And the transceiver can transmit and receive all three bands simultaneously, each band has a bandwidth of up to 300 MHz. Final transmission output of transceiver for each band is over 20 dBm to be suitable for driving the T/R module. Receiver bandwidth is selected according to the required function and receiver gain has approximately C-band 52 dB, X-band 50 dB, Ku-band 60 dB, the maximum noise figure of Ku-band V polarization is 4.28 dB in the whole band H, V polarization. As a result of the electrical performance test, a multi-band TCA is satisfied the property requirements of the MCSAR.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.236-241
• /
• 2019

This paper will read about a multichannel frequency-modulated continuous wave (FMCW) radar sensor with switching transmit (TX) antennas is developed at W-band. To achieve a high angular resolution, a uniform linear array consisting of 5 switching-TX and 12 receive (RX) antennas is employed with the digital beamforming technique. The overall radar front-end module comprises a W-band transceiver and TX/RX antennas. A multichannel transceiver module consists of 5 up-conversion and 12 down-conversion channels, where one of the TX channels is sequentially switched ON. For developing transmitter, we developed an HPA (high power amplified) MMIC chip for W-band radar system and fabricated a transmitter module using this chip. In order to develop the W-band transmitter, we analyzed the important antenna transition structure from HPA MMIC line to W/G (Waveguide)antenna via M/S(microstrip) and fabricated it with 5 transmission channels. As a result, the output power of the transmitter was within 1 dB of the error range after analysis and measurement under normal temperature and environmental conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.843-850
• /
• 2013

Cognitive radio systems have been considered as a strong solution of frequency scarcity due to the limit of frequency resources. This paper proposed an active interference management scheme that the secondary system can coexist with the primary system in the same frequency band without interference. Using the proposed protocol, the secondary user acquires interference channel information and transmit/receive filter information and designs precoding matrix using these information. Since interference from the secondary systems are collected to unused subchannels of the primary system, the primary system can suppress interference without additional process. The secondary systems suppress interference from the primary system using whitening matched filter so that the spectral efficiency can be improved. Numerical results provides that the proposed scheme improves performance of the secondary systems without interference to the primary system and do not degrade performance of the primary system even if the number of the secondary systems increases.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.311-318
• /
• 2018

In this paper, test-bed for the evaluation of wireless communication system on a small launch vehicle is proposed. The proposed test-bed consists of antenna test-coupler, RF attenuators, and RF switch modules. The antenna test-coupler isolates antennas for each band and transmits / receives wireless signals. The RF attenuator and switch are used for path selection of testing signal path. In design and measurement result of the antenna test-coupler, the antenna test-coupler has shielding effect higher than 39.3, 47.1, 56.1 dB at UHF-, S-, X-band. Through testing on small launch vehicle wireless communication system, we were able to successfully transmit and receive data between each test system and launch vehicle with antenna path switching.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.303-314
• /
• 2017

With increased human activity in space, the risk of re-entry and collision between space objects is constantly increasing. Hence, the need for space situational awareness (SSA) programs has been acknowledged by many experienced space agencies. Optical and radar sensors, which enable the surveillance and tracking of space objects, are the most important technical components of SSA systems. In particular, combinations of radar systems and optical sensor networks play an outstanding role in SSA programs. At present, Korea operates the optical wide field patrol network (OWL-Net), the only optical system for tracking space objects. However, due to their dependence on weather conditions and observation time, it is not reasonable to use optical systems alone for SSA initiatives, as they have limited operational availability. Therefore, the strategies for developing radar systems should be considered for an efficient SSA system using currently available technology. The purpose of this paper is to analyze the performance of a radar system in detecting and tracking space objects. With the radar system investigated, the minimum sensitivity is defined as detection of a $1-m^2$ radar cross section (RCS) at an altitude of 2,000 km, with operating frequencies in the L, S, C, X or Ku-band. The results of power budget analysis showed that the maximum detection range of 2,000 km, which includes the low earth orbit (LEO) environment, can be achieved with a transmission power of 900 kW, transmit and receive antenna gains of 40 dB and 43 dB, respectively, a pulse width of 2 ms, and a signal processing gain of 13.3 dB, at a frequency of 1.3 GHz. We defined the key parameters of the radar following a performance analysis of the system. This research can thus provide guidelines for the conceptual design of radar systems for national SSA initiatives.