• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.2
• /
• pp.76-81
• /
• 2002

The melt-spun amorphous $Fe_{77-X}P_{13}C_4B_4Al_2Mo_X$(x=4~10) and $Fe_{82-X}P_XC_4B_4Al_2Mo_8$(x=9~15) alloys were found to exhibit a large supercooled liquid region(${\Delta}T_x$) exceeding 40 K before crystallization. The largest ${\Delta}T_x$ for the glassy alloys containing Mo reaches as large as 65 K for the $Fe_{69}P_{13}C_4B_4Al_2Mo_8$ alloy. The corrosion behavior of the amorphous $Fe_{77-X}P_{13}C_4B_4Al_2Mo_X$(x=4~15) and $Fe_(82-X)P_XC_4B_4Al_2Mo_8$ (x=9~17) alloys were examined by electrochemical measurements in 9M $H_2SO_4$ solution at 303 K. The addition of Mo(or P) for replacing some portion of Fe is effective in improving the corrosion resistance of the investigated Fe-based glassy alloys. They are spontaneously passivated and have a wide passive region with low passive current density.

• The Journal of Natural Sciences
• /
• v.16 no.1
• /
• pp.15-29
• /
• 2005

To produce a thermostable cyclodextrin by using thermotolerant cyclomaltodextrin glucanotransferase(CGTase), a thermophilic and alkalophilic bacterium isolate, designated B-13 showing the highest CGTase activity was isalated from natural sources and identified as Bacillus cereus B-13 based on the morphological and physiological characteristics, and 16S rRNA sequence. The maximal CGTase activity (130 U/ml) was obtained when Bacillus cereus B-13 was cultured in SYC medium containing 2.0% soluble starch, 1.0% yeast extracts, 1% corn steep liquor and 1% $Na_2CO_3$ (pH 8.5) at $50^{\circ}C$ for 24 h and about 80% of maximal activity was also showed in he culture broth of $60^{\circ}C$ for 18 h. Optimum reaction temperature and pH of the partial purified CGTase for soluble starch were $65^{\circ}C$ and pH 8.5-9.0 respectively. The partial purified CGTase were also stable below $80^{\circ}C$ and pH 5.0-10.0. When 1% soluble starch was digested with the partial purified CGTase, the yield of cyclodextrin was 49%.

• Korean Journal of Crystallography
• /
• v.12 no.3
• /
• pp.141-144
• /
• 2001

From the reaction of Na[Ga(N₃)₄] with PPh₃, an ionic compound [Ph₃P(OH)]/sup +/[N₃]/sup -/ (1) was isolated. Compound 1 was characterized by spectroscopy (¹H-NMR, /sup 13C{¹H}-NMR, and IR) and X-ray diffraction. Crystallographic data for 1 : orthorhombic space group P2₁2₁2₁, a = 10.491 (4) Å, b=11.603(5)Å, c=13.149(5)Å, Z=4, R(wR₂)=0.0547(0.0978).

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.48-53
• /
• 2009

The CMOS RF front-end for Global Positioning System(GPS)are implemented in 1P8M CMOS $0.13{\mu}m$ process. The LNAs consist of LNA1 with high gain and low NF, and LNA2 with low gain and high IIP3 for supporting operation with active and passive antenna. the measured performances of both LNAs are 16.4/13.8 dB gain, 1.4/1.68 dB NF, and -8/-4.4 dBm IIP3 with 3.2/2 mA form 1.2 V supply, respectively. The quadrature downconversion mixer is followed by transimpedance amplifier with gain controllability from 27.5 to 41 dB. The front-end performances in LNA1 mode are 39.8 dB conversion gain, 2.2 dB NF, and -33.4 dBm IIP3 with 6.6 mW power consumption.

• Research in Plant Disease
• /
• v.15 no.2
• /
• pp.130-133
• /
• 2009

We have conducted in vitro experiments with nano-silver liquid for their effect against various plant pathogenic bacteria. Different types of nano-silver liquid WA-CV-WA13B, WA-AT-WB13R and WA-PR-WB13R were used. These are classified based on different manufacturing processes. The tested bacteria were provided by KACC. We experimented ten bacterial isolates in Clavibacter, Erwinia, Pseudomonas, Ralstonia, and Xanthomonas genera. In order to determine the level of concentrations of control effects, different concentrations (10, 25, 50, and 100 ppm) of each different nano-silver liquid were added in the culture media. As a result, WA-CV-WA13B showed high inhibition effect against C-1 at 10 ppm, and showed minor inhibition effects against P-6, X-1, and X-2. WA-AT-WB13R showed bactericidal effect against P-6 at 10 ppm. At 10 ppm, WA-AT-WB13R showed relatively high inhibition effects against C-1, X-1, and X-2. WA-PR-WB13R showed bactericidal effects against P-5, P-6 and X-2 at 10 ppm or higher concentrations. All the tested three nano-silver liquid showed bactericidal effects against all the tested plant pathogenic bacteria at concentrations of 25 ppm or higher. These results indicated the possible use of nano-silver liquid for the control of plant pathogenic bacteria.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.98-107
• /
• 2013

This work describes a 13b 100 MS/s 0.13 um CMOS four-stage pipeline ADC for 3G communication systems. The proposed SHA-free ADC employs a range-scaling technique based on switched-capacitor circuits to properly handle a wide input range of $2V_{P-P}$ using a single on-chip reference of $1V_{P-P}$. The proposed range scaling makes the reference buffers keep a sufficient voltage headroom and doubles the offset tolerance of a latched comparator in the flash ADC1 with a doubled input range. A two-step reference selection technique in the back-end 5b flash ADC reduces both power dissipation and chip area by 50%. The prototype ADC in a 0.13 um CMOS demonstrates the measured differential and integral nonlinearities within 0.57 LSB and 0.99 LSB, respectively. The ADC shows a maximum signal-to-noise-and-distortion ratio of 64.6 dB and a maximum spurious-free dynamic range of 74.0 dB at 100 MS/s, respectively. The ADC with an active die area of 1.2 $mm^2$ consumes 145.6 mW including high-speed reference buffers and 91 mW excluding buffers at 100 MS/s and a 1.3 V supply voltage.

• Textile Coloration and Finishing
• /
• v.19 no.3
• /
• pp.18-25
• /
• 2007

The fixing behaviors of anthraquinone disperse dyes containing dimethylamino substituent, such as C. I. Disperse Violet 26(D.V.26) and C. I. Disperse Blue 14(D.V.14), or containing diamino substituent, such as C. I. Disperse Blue 73(D.B.73), and monochlorotriazinyl azo reactive dyes, such as C. I. Reactive Orange 13(R.O.13), C. I. Reactive Red 3(R.R.3). C. I. Reactive Yellow 2(R.Y.2) on polyester/cotton blend(P/C) fabrics were examined for the one-step printing of P/C fabrics. The high temperature steaming of $175^{\circ}C$ is the most satisfactory fixing method for P/C one-step printing with above disperse and reactive dyes among the four different fixing methods: $175^{\circ}C$ steaming, $102^{\circ}C$ steaming${\rightarrow}175^{\circ}C$ steaming, $190^{\circ}C$ thermosol, $102^{\circ}C$ steaming${\rightarrow}190^{\circ}C$ thermosol. $190^{\circ}C$ thermosol is unfit to fix R.R.3 and R.Y.2 whose heat stability is poor. It was found that D.V.26 and D.B.14 containing dimethylamino substituent are unstable for heat and alkali, but D.B.73 is stable for them to print P/C blend fabrics with R.O.13 which is also stable for heat. Therefore we found that D.B.73, R.O.13 and a pair of D.B.73 and R.O.13 were very suitable for one-step printing of P/C blend fabrics.

• Microbiology and Biotechnology Letters
• /
• v.14 no.2
• /
• pp.155-160
• /
• 1986

$\alpha$-Amylase gene of B. amyloliquefaciens was cloned to E. coli-yeast shuttle vector YEp-13 and expressed in E. coli. Chromosomal DNA of B. amyloliquefaciens was partially digested with Sau3Al and YEp13 plasmid was cleaved with BamH1. The hybrid plasmid, pHA28, was constructed by shotgun method and transformed to E. coli C600 and HB101. The amount of $\alpha$-amylase produced by transformants of E. coli was about 20% to 30% of that produced by B. amyloli-quefaciens. About 65% of $\alpha$-amylase produced by transformant was secreted into periplasm and the others were located in cytoplasm. $\alpha$-Amylase production was maximal when transformants were cultivated for 15hr to 20hr. As the result of agarose gel electrophoresis, pHA28 plasmid was found to be various in its size. This result suggested that pHA28 plasmid was segregated.

• The Korean Journal of Mycology
• /
• v.17 no.3
• /
• pp.105-113
• /
• 1989

For selective purification of proteins in Pleurotus cornucopiae, affinity chromatography was performed by p-aminoanilinylsuccinyl-AH-Sepharose 4B gel synthesized by treating p-phenylene diamine with succinyl-AH-Sepharose 4B, which was prepared by treating AH-Sepharose 4B with succinic anhydride. The capacity of p-aminoanilinyl ligand group was 6.1 micromole per milliliter of gel. Total apparent molecular weight of the affinity proteins eluted from the synthesized gel was 167 KD, which were a protein complex of 130 KD and 37 KD. The contents of the nonpolar, polar, positively and/or negatively charged amino acids in the affinity protein were 44.57%, 24.75%, 21.25%, and 9.43%, respectively. Total apparent molecular weight of the affinity proteins eluted from the AH-Sepharose 4B gel was 95.2 KD, which were a protein complex of 61 KD, 31 KD and 3.2 KD. The contents of the nonpolar, positively and/or negatively charged amino acids in the affinity protein by AH-Sepharose 4B gel were 44.05%, 29.13%, and 12.91% respectively.

• Microbiology and Biotechnology Letters
• /
• v.14 no.3
• /
• pp.209-212
• /
• 1986

$\alpha$-Amylase gene of Bacillus amyloliquetaciens was cloned on plasmid YEp13, S. cerevisiae-E. coli shuttle vector. Hybrid plasmid pTG17, carrying $\alpha$-amylase gene of B. amyloliquefaciens, was transformed to E. coli and the expression of it in yeast was investigated. This plasmid was unstable in E. coli and produced two minor plasmids, pTG17-1 and PTG17-2, which resulted from the segregation of it. Transformant of S. cerevisiae MC16 with pTG17-1 plasmid was not appeared on SD medium because of the Leu2 gene defection. S. cerevisiae could be transformed by the hybrid plasmid, and $\alpha$-amylase activity of the yeast transformant was detected by somogyi-Nelson method and agar diffusion method.