• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.63-68
• /
• 2006

This research presents the reliability analysis of the pneumatic actuator within the tape feeder that is used to transfer the correct force to linked parts during l.0E+7 cycles. First, the degradation analysis for thrust and air leakage is executed to obtain the failure data of a product based on its performance over time. Second, once the parameters has been calculated using the weibull 2-parameter distribution and MLE(Maximum Likelihood Estimation), information related to life such as reliability, failure rate, probability density function is estimated. Finally, MTTF(Mean Time To Failure) and $B_{10}$ life of actuators are calculated. MTTF means the mean life at the confidence level and $B_{10}$ life refers to the time by which 10% of the product would fail. In this study, failure causes and solutions are examined using the reliability analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2011

The role of RCDs(Residual Current Protective Device) that are installed before the load is very important for preventing electric shock and electrical fire. However, although fault rate of RCD is increasing due to deterioration and long period usage, the RCD is permanently used without a checking of performance evaluation and it causes the electrical accident. In this paper, the amount of airborne chloride is researched in domestic costal area and the accelerated life test is conducted using a salt water spray tester in order to decide the life time of RCD. Aa a result of an accelerated life test, the MTTF(Mean Time To Failure) of RCD is 110.81 hours and B10 life time of RCD is 45.81 hours for the all samples. when an accelerated life test result is applied to within 2 km costal area, the life time of RCD is predicted about 5 years.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.33-41
• /
• 2012

The aim of the study is to investigate the method to estimate a shelf life of KM6 single base propellant by stochastic gamma process model. The state failure level is assumed that the degradation content of stabilizer is below 0.8%. The constant of time dependent shape function and the scale parameter of stationary gamma process are estimated by moment method. The state distribution at each storage time can be shown from probability density function of deterioration. It is estimated that the $B_{10}$ life, a time at which the cumulative failure probability is 10%, is 25 years and the $B_{50}$ life is 36 years from cumulative failure distribution function curve. The $B_{50}$ life can be treated as the average shelf life from the practical viewpoint and the lifetime can be expressed as distribution curve by using stochastic process theory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.2993-2999
• /
• 2015

Steel companies are applying Ni-B or Ni-Co alloy plating to protect the surface of Continuous casting mold, and they are using saccharin polish which causes crack on plating layer due to sulfur in saccharin. It is considered that the Ni-S compound causes the cracking and additional tensile stresses. The Ni-Mn-B ternary alloy plating was developed for suppression of crack by forming Mn-S compound before Ni-S compound is formed, but there were no domestic or international standard on the Ni-Mn-B alloy plating. Therefore, reliability evaluation standard was established to evaluate the newly developed Ni-Mn-B plating. To develop accelerating life testing method, FMEA(Failure Mode & Effective analysis) was used to analyze the cause of the main failure in plating. The Ni-Mn-B reliability standard included accelerating life test method, and it was categorized by the fundamental performance test, environment test, and accelerated life test, and was designed to guarantee 1 000 hours of B10 life with 80 % reliable level.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.17-25
• /
• 2014

The purpose of this paper is to present a method to estimate the storage life of propellant bag for degradation of breaking load with storage time by using gamma process model. The nitrogen compound generated by natural decomposition of propellants degrades the breaking load of propellant bag with time. The statistical distributions of condition and lifetime with time were shown from the results of accelerated life test of propellant bag cloth at $80^{\circ}C$. It was found that the use of median for life was highly appropriate and the $B_1$ or $B_5$ life should be selectively applied to the quality assurance policy.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.141-145
• /
• 2005

Nowadays, most industries take $B_{6\sigma}$ quality level as a goal of the ultimate quality level of their products. On the other hand, $B_{10}$ to life indicates the time that $10\%$ of products are failed. There is no relation between the $B_{6\sigma}$ quality level and the $B_{10}$ to life. Therefore, some industries perform their quality control activities and reliability engineering activities separately. So I propose one measure which can express quality and reliability level simultaneously for the products to pursue quality and reliability activities together in the industry.

• Korean journal of applied entomology
• /
• v.46 no.3
• /
• pp.401-408
• /
• 2007

The feeding behaviors of 2 biotypes (type B and Q) of tobacco whitefly, Bemisia tobaci, were monitored using EPG technique on tomato and pepper plants treated 3 insecticides for controlling whiteflies, for examples, acetamiprid, spinosad and thiamethoxam. After treatment of three insecticides with recommended concentrations to tomato and pepper plants, EPG waveforms were recorded during 6 hours. The characteristic patterns of feeding behaviors investigated were as follows; time consumed by withdrawal of proboscis, total non-penetration time, total stylet pathway pattern time and total phloem feeding time. There was somewhat difference among 3 insecticides tested. As a result of investigation of total duration showed the stylet pathway activity due to the reaction against all tested insecticides, the Q biotype showed fewer time than those from the B biotype. The B biotype showed more frequent stylet pathway activity patterns during whole recording time and a shorter phloem ingestion time than those from the Q biotype. In result of prior up (non-penetration) time representing the reaction against the insecticide treated, the time of B biotype was more faster than that of the Q biotype, so it was considered that the B biotype was more sensitive to the tested insecticides. Therefore, our results revealed a clear difference in feeding behaviour between the B and Q biotypes of B. tabaci. Also, it was investigated that B biotype was susceptible to the 3 insecticides.

• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.513-522
• /
• 2020

The purpose of this study is to analyze the auto-regression effect between the elderly's assets and depression and life satisfaction, and to approach the influence of assets and depression on the elderly's life from a longitudinal perspective. For this purpose, the data for the 9th year (2014), 11th year (2016), and 13th year (2018) of the Korea Welfare Panel were used. As a result of the analysis, First, the assets, depression and life satisfaction of the elderly have a lasting effect on the passage of time, and the assets, depression and life satisfaction of the previous point in time (B=.694, B=.725, p<.001), depression (B=.258, B=.331 and p<.001) and life satisfaction (B=.264, B=.265, p<.001). Second, cross-recursion coefficients show how the relationship between the assets of the elderly and depression and the satisfaction of life affects each other over time, and the assets of the older person at the previous point in time (B=.010, B=.011, p<.001), the assets of the older persons at previous times are subsequently satisfied with their lives (B=.128, B=.124, p<.001). Based on the results of the above analysis, it is necessary to support the elderly's asset management service and education to prevent depression, such as continuous asset utilization education.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.202-205
• /
• 2010

In this paper, mechanical reliability(Life-time) estimation method for 25.8kV SIS(Solid Insulated Switchgear) has been studied. Recently enacted KEPCO's standard includes clause that have to submit a warrantable reliability data for life-time(over B10 25 years) of an epoxy-solid insulating material. Accordingly, this research was carried out on the ALT(Accelerated Life Test) and Life-Estimation method for SIS's insulating material. Mechanical life-time estimation for SIS's insulating material is to verify reliability for tensile creep & fatigue stress, which is the major mechanical stress of SIS. This study proved that SIS's reliability for mechanical stress and established that confidence for estimation results in further verification test.

• Journal of fish pathology
• /
• v.34 no.2
• /
• pp.161-168
• /
• 2021

Quantitative analysis of myxosporean parasites (Enteromyxum leei and Parvicapsula anisocaudata) were performed using real-time PCR on the internal organs (head kidney, body kidney, intestine, spleen, brain, liver, heart, muscle, blood, and eye) of emaciated Paralichthys olivaceus from farm-A. The highest DNA copy number of E. leei was shown in the intestine (1.3 × 10⁸ copies/mg tissue) of emaciatied P. olivaceus and DNA copy number in the other internal organs (1.3 × 10³~4.6 × 10⁵ copies/mg tissue) showed lower than in intestine. From the result of real-time PCR for P. anisocaudata, it was considered mildly infected, due to the low DNA copy numbers of the head kidney (1.3 × 10³ copies/mg tissue) and body kidney (9.1 × 10³ copies/mg tissue). In order to investigate whether myxosporean parasites can be detected in a non-invasive way, quantitative analysis of E. leei and P. anisocaudata from rearing water of three farms were performed by real-time PCR. The DNA copy number of E. leei from rearing water of farm-A and farm-B were 8 × 10⁴ and 5 × 10⁵ copies/L, respectively. However, it was not detected in farm-C. For P. anisocaudata from rearing water, farm-A, farm-B and farm-C showed 0, 2.0 × 10⁶ and 5.1 × 10⁶ copies/L, respectively.