• 한국식생활문화학회지
• /
• 제8권1호
• /
• pp.63-71
• /
• 1993

The purpose of this paper it to investigate the differences in prevalence of obesity and body fat distribution on the variances of age. Height, weight, skinfold thickness and girth circumference on about 422 women residing in Cheju, Korea were surveyed. The results of analysis of the survey are as follows : 1) All the antropometric measurements except height were shown to increase with age. Weight is at its highest level between the age of 50-59. The measurement of skinfold thickness and girth circumference between the ages of 20-39 of the female subjects are significantly higher than the above 40's. However, there is no significant difference among the middle aged women. 2) Physical indices tend to increase according to age. Both BMI and RBW of women in their 50's are at their highest values, however, the index values of the women in their 60's decreased slightly (p<0.05). On the contrary, there is no significant difference in the percentage of body fat and total body fat content among the middle aged women surveyed. 3) According to this survey, 15.6% of the 422 subjects are assessed as being obese ; more specifically 4.4% of women in their 20's, 12.6% in 30's, 25.6% in 40's, 22.5% in 50's and 17.3% in 60's. 4) 39.4% among obese women proved to be upper body type women. Because the frequency of upper body type women became higher as the obese women aged, there is possibility that the pattern of fat distribution can change. 5) Weight is the most highly correlated with BMI(r=0.91), whereas weight as correlated with RBW, percentage of BF and WHR are 0.8, 0.66 and 0.44 respectfully. The conclusion of this survey is that it is better to estimate the value of total body fat and percentage of body fat than the value of BMI in the analysis of prevalence of obesity and its related factors of middle aged women.

• 대한지역사회영양학회지
• /
• 제3권2호
• /
• pp.174-189
• /
• 1998

The purpose of this study was to evaluate the nutritional status and growth of Korean infants, who were atending peripheral community clinics in low income areas, by anthropometric measurements and estimating dietary intakes. Dietary intakes and growth were compared among different feeding patterns of 143 infants until age 9 months. The overall mean nutrient intakes of infants in this study were below the recommended allowances except the calcium intake from significant difference in each groups; however, calcium, zinc and iron intake of the formula fed infant(FF) was higher than the breast fed infant(BF) or the mixed fed infant(MF). Form ages 4-6 months, the nutrient intakes were shown to be higher in groups that were given supplementary foods than groups that were not. From ages 7-9 months, all nutrient intakes were higher in or the formula and supplementary foods fed(ESF) infants than in the breast and supplementary food(BSF) or the formula and supplementary food(FSF) groups, All subjets in this study showed a large Z-score. The growth of infants up to 6 months of age showed no significant difference in the feeding pattern, however, after 7 months of age the BSF group had significantly lower weight than the FSF or the ESF groups, There were significant positive relationships between infants weight gain at age 7-9 months from birth and the current protein or zinc intakes. As a result the average status of nutrient intakes of infants in this area was loser than the RDA, however, the growth pattern was fairly good. Although the breast milk is beneficial for infants, mothers should be educated for the importance of supplemental food and its practice to support good mutrition(Korean J Community Nutrition 3 (2) : 174-189, 1998)

• Advances in environmental research
• /
• 제3권1호
• /
• pp.71-86
• /
• 2014

Macronutrients ($Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$), yield and yield components, bioaccumulation and translocation of metal in plant parts of three Vigna species (V. cylindrica, V. mungo, V. radiata) were evaluated at 0, 50, 100 and $150mgkg^{-1}$ soil of Nickel (Ni). A marked inhibition (p < 0.001) in the distribution of various macronutrients was noticed in these Vigna species except for $Mg^{2+}$ content of the shoot and leaves. Similarly, all species retained more $Ca^{2+}$ in their roots (p < 0.05) as compared to the aerial tissues. Ni induced a drastic decline (p < 0.001) for various yield and yield attributes except for 100 seed weight. Toxicity and accumulation of Ni in plant tissues considerably increased in a concentration dependent manner. Vigna species signify an exclusion approach for Ni tolerance as both bioaccumulation factor (BF) and translocation factor (TF) were less than 1.0. The Ni content of plants being root > shoot > leaves > seeds. Scoring for percentage stimulation and inhibition (respective to control) at varying levels of Ni revealed tolerance of the species in an order of V. radiata > V. cylindrica > V. mungo. The acquisition of Ni tolerance in V. radiata seems to occur through an integrated mechanism of metal tolerance that includes sustainable macronutrients uptake, stronger roots due to greater deposition of $Ca^{2+}$in the roots, restricted transfer of Ni to above ground tissues and seeds as well as exclusion capacity of the roots to bind appreciable amount of metal to them. Thus, metal tolerant potential of V. radiata could be of great significance to remediate metal contaminated soil owing lesser impact of Ni on macro-nutrients, hence the yield.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권4호
• /
• pp.458-462
• /
• 2005

The study was aimed at detecting polymorphism of the fifth intron in lipoprotein lipase (LPL) gene and analyzing association between the polymorphism and productive traits. A pair of primers was designed for amplifying the fifth intron. Sequence analysis indicated that a G1171C substitution existed in Large White breed. The mutation was detected by PCR-AfaI-RFLP. Polymorphism analysis in a pig resource family showed that there existed significant effects on carcass and meat quality traits. Thoraxwaist fat thickness of BB genotype was significantly higher (14.2%, p<0.05) than that of AA on carcass traits, while BB genotype was significantly lower (3.6% p<0.01, 4.1% p<0.01; 2.3% p<0.01, 1.9% p<0.01; 1.8% p<0.01, 1.4% p<0.05) than AA and AB genotype in pH of m. Longissimus Dorsi (LD), m. Biceps Femoris (BF), m. Semipinali Capitis (SC). The allelic frequencies were also significantly different between indigenous Chinese breeds and exotic breeds. Data analyzed revealed that the mutation locus affected production traits mostly by additive effects. Based on these results, it is necessary to do more studies on LPL gene before making the LPL locus into the application of marker-assisted selection (MAS) programs.

• 한국운동역학회지
• /
• 제19권3호
• /
• pp.603-610
• /
• 2009

본 연구의 목적은 드롭 착지 동작 시 탄성 섬유 바지 착용이 충격력과 근육 활동에 어떠한 영향을 미치는가를 분석하는데 있다. 10명의 피험자를 대상으로 7쌍의 표면전극을 대퇴직근, 내측광근, 외측광근, 대퇴이두근, 전경골근, 내측비복근, 외측비복근에 부착하고 탄성 바지와 일반 바지를 무작위로 착용한 상태로 플랫폼에서 드롭 랜딩하였고 각 변인에 대해 대응표본 t-검증을 실시하여 통계적 유의차를 밝혔다(p< .05). 착지 구간 동안 전경골근, 대퇴이두근, 내측비복근의 평균적분 근전도치가 일반바지 착용 시 유의하게 감소되었다. 대퇴직근을 제외한 모든 근육에서 최대적분 근전도가 탄성바지 착용 집단이 높게 나타났다. 탄성바지 착용 시 신체 하지분절의 감속과 안정을 유지하기 위한 근육 동원 능력이 높아져 이러한 현상이 발생되어진 것으로 사료된다. 탄성바지 착용이 충격력과 부하율의 감소에 통계적으로 유의한 결과를 발생시키지 못하였다. 본 연구에서 사용된 탄성바지는 피험자의 하지 둘레에 적합하게 제작되어진 바지가 아니기 때문에 탄성과 압축력이 이상적으로 발생되지 못한 것으로 판단된다.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.123-130
• /
• 2020

In this study, two types of thick steel plates are prepared by controlling carbon equivalent and nickel content, and their microstructures are analyzed. Tensile tests, Vickers hardness tests, and Charpy impact tests are conducted to investigate the correlation between microstructure and mechanical properties of the steels. The H steel, which has high carbon equivalent and nickel content, has lower volume fraction of granular bainite (GB) and smaller GB packet size than those of L steel, which has low carbon equivalent and nickel content. However, the volume fraction of secondary phases is higher in the H steel than in the L steel. As a result, the strength of the L steel is higher than that of the H steel, while the Charpy absorbed energy at -40 ℃ is higher than that of the L steel. The heat affected zone (HAZ) simulated H-H specimen has higher volume fraction of acicular ferrite (AF) and lower volume fraction of GB than the HAZ simulated L-H specimen. In addition, the grain size of AF and the packet sizes of GB and BF are smaller in the H-H specimen than in the L-H specimen. For this reason, the Charpy absorbed energy at -20 ℃ is higher for the H-H specimen than for the L-H specimen.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권2호
• /
• pp.135-141
• /
• 2013

본 연구에서는 CaO-$SiO_2-Al_2O_3$가 다량 함유된 산업폐기물과 산업부산물을 소성하여 개발한 분말형 속경성 분말을 초기강도의 향상을 위해 기능성 분쇄조제로 처리하여 분쇄한 속경성 미분말을 제조하였다. 이렇게 제조된 미분말을 BFS 분말과 일정비율로 혼합한 후, 시멘트에 첨가하여 모르타르 압축강도 실험을 실시하였다. 그 결과 BFS 조기강도 향상 실험 (Series I)에서는 클링커 분쇄시 기능성 분쇄조제가 첨가되어 분쇄된 속경재가 혼합된 BFS의 초기강도 발현이 우수하며 OPC 조기강도 향상 실험 (Series II)에서는 Clinker-C에 본 실험의 기능성 분쇄조제가 첨가되어 분쇄된 속경성의 분말형 자극제가 첨가된 경우에 가장 압축강도가 높은 사실을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.720-726
• /
• 2000

The analytic gradient method for the equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) energy has been extended to employ a reduced molecular orbital (MO) space. Not only the innermost core MOs but also some of the outermost virtua l MOs can be dropped in the reduced MO space, and a substantial amount of computation time can be reduced without deteriorating the results. In order to study the magnitudes and trends of the effects of the dropped MOs, the geometries and vibrational properties of the ground and excited states of BF, CO, CN, N2, AlCl, SiS, P2, BCl, AIF, CS, SiO, PN and GeSe are calculated with different sizes of molecular orbital space. The 6-31 G* and the aug-cc-pVTZ basis sets are employed for all molecules except GeSc for which the 6-311 G* and the TZV+f basis sets are used. It is shown that the magnitudes of the drop-MO effects are about $0.005\AA$ in bond lengths and about 1% on harmonic frequencies and IR intensities provided that the dropped MOs correspond to (1s), (1s,2s,2p), an (1s,2s,2p,3s,3p) atomic orbitals of the first, the second, and the third row atoms, respectively. The geometries and vibrational properties of the first and the second excited states of HCN and HNC are calculated by using a drastically reduced virtual MO space as well as with the well defined frozen core MO space. The results suggest the possibility of using a very smalI MO space for qualitative study of valence excited states.

• 한국운동역학회지
• /
• 제28권4호
• /
• pp.199-205
• /
• 2018

Objective: The purpose of this study was to examine the effect of increase in barbell weight on closely related variable to the anterior cruciate ligament (ACL) injury which are knee joint kinematics, joint load, joint moment, and maximum load attainment point during snatch of the weight lifting. Method: The subjects of the study were 10 male Korean national weight lifting athletes (69 kg 5, 77 kg 5; age: $21.80{\pm}3.91yrs.$, height: $168.00{\pm}4.06cm$, weight: $75.00{\pm}4.02kg$, career: $7.8{\pm}3.99yrs.$, snatch records: $168{\pm}4.06kg$). The weight of the barbell during the snatch operation was set at 70%, 75% and 80% of the highest records for each subject studied. Results: The result obtained from the one-way repeated measure ANOVA are as follows: With increased barbell weight, the extension moment of the left knee joint was higher in the 80% condition than the 70% (p<.001). However, other variables were not statistically significant difference. According to the factor analysis of the variables related to maximum load attainment point of the ACL major injury variables, the first sub-factor was the internal shear force, the posterior shear force, the abduction moment, and the muscle activity of the VL. The second sub-factor was the extension moment of the knee joint, compressive force, adduction moment, and the third sub-factor was the muscle activity of BF. Conclusion: These results indicate that the possibility of ACL injury can be lowered when performing a stable snatch movement.

• 한국식품위생안전성학회지
• /
• 제25권4호
• /
• pp.289-293
• /
• 2010

식품을 제조, 가공하는 과정 중 생성되는 3-MCPD (3-Monochloropropane-l,2-diol)는 식품 중 미량 존재하는 유해 물질로 우리나라에서는 산분해간장 빛 혼합간장과 산분해단백질 (HVP)에 기준을 설정하여 관리하고 있다. 3-MCPD 지방산에스테르라고도 불리는 결합형 3-MCPD는 지방산과 글리세라이드가 반응하여 생성되는 중간물질로서, 독일 연방위해 평가원(BfR)에서는 3-MCPD 지방산에스테르 자체의 독성이나 위해성에 대한 자료는 부족하지만, 인체내에 식품형태로 들어가서 가수분해될 때 3-MCPD가 생성될 수 있으므로 저감화 대책이 필요하다고 보고하고 있다. 따라서, 본 연구에서는 최근에 개발된 결합형 3-MCPD 분석법을 이용하여, 간장 등 장류 식품, 조미식품과 식육가공품 등 209건에 대해 결합형 3-MCPD 함량조사를 실시한 결과, 전체 209건의 검체 중에서 장류의 경우 44건의 검체 중에서 8건에서 결합형 3-MCPD가 검출되었고(0.02~0.28ppm), 스프 12건 종 8건에서 결합형 3-MCPD가 검출되었다(0.01~0.96ppm). 소스는 60건 중 22건에서 결합형 3-MCPD가 검출되었으며(0.01~0.55ppm), 식육가공품의 경우 총 30건의 검체 중 16건에서 결합형 3-MCPD가 검출되었다(0.04~0.l8ppm). 스낵과자에서는 28건 중 20건에서 결합형 3-MCPD가 검출되었고(0.09~1.43ppm), 유탕면제품 10건 중 8건에서 검출되었다(0.04~1.22ppm). 견과류가공품 10건 중 6건에서 결합형 3-MCPD가 검출되었으며 (0.06~0.25ppm), 식물성크림에서는 15건 중 1건에서 결합형 3-MCPD가 0.05ppm이 검출되었다. 이상의 검출수준은 제외국과 비교할 때 낮은 수준이었다.