• 청정기술
• /
• 제23권1호
• /
• pp.27-33
• /
• 2017

본 연구에서는 중금속 7종(Cu, Cd, Cr, As(III), As(V), Zn, Ni) 및 나노입자 5종(CuO, ZnO, NiO, $TiO_2$, $Fe_2O_3$)에 대한 독성을 수계 대표 생물종인 녹조류 Chlorella vulgaris를 이용한 생물검정법으로 평가하였다. 조류에 미치는 영향은 흡광도, 클로로필 및 개체수 측정에 대한 결과를 통합하여 평가하였다. 중금속의 통합결과독성($TEC_{50}$) 순서는 Cr ($0.7mgL^{-1}$) > Cu ($1.7mgL^{-1}$) > Cd ($3.2mgL^{-1}$) > Zn ($3.9mgL^{-1}$) > Ni ($13.2mgL^{-1}$) > As(III) ($17.8mgL^{-1}$) ${\gg}$ As(V) (> $1000mgL^{-1}$)로 나타났다. 중금속은 측정종말점에 따라 일부 상이한 민감도와 독성이 조사되었다. 나노입자의 독성($TEC_{50}$) 순서는 ZnO ($2.4mgL^{-1}$) > NiO ($21.1mgL^{-1}$) > CuO ($36.6mgL^{-1}$) > $TiO_2$ ($62.5mgL^{-1}$) > $Fe_2O_3$ ($82.7mgL^{-1}$)로 나타났다. 나노입자는 측정종말점간에 비슷한 민감도와 독성을 보였다. 따라서 오염물의 독성을 평가하기 위해서 단일 방법에 의한 결과보다는 다양한 측정종말점의 통합결과에 근거한 접근이 적절할 것이다.

• 항공우주시스템공학회지
• /
• 제7권4호
• /
• pp.36-41
• /
• 2013

In order to improve incombustibility of EPDM(Ethylene propylene diene monomer)-based rubber, inorganic materials as $Al(OH)_3$ and $Sb_2O_3$ were added. The mechanical and thermal properties have been measured for vulcanized rubber loaded with different concentrations of $Al(OH)_3$ and $Sb_2O_3$. As inorganic material contents increases from 5phr to 30phr, the specific gravity and hardness increase while elongation at break decreases. This study performed incombustibility test and thermal analysis through TGA(Thermogravimetric Analyzer). As a results, incombustible and thermal properties of EPDM-based rubber were improved as $Al(OH)_3$ and $Sb_2O_3$ contents increase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.311-315
• /
• 2000

Vanadate glass in the $LiO_2-P_2O_5-Bi_2O_3-V_2O_5$ system containing 10mol% glass fonner, $P_2O_5$ and $Bi_2O_3$ was prepared by melting the batch in pt. crucible followed by Quenching on the copper plate. We found that $LiO_2-P_2O_5-Bi_2O_3-V_2O_5$ glass-ceramics obtained from nucleation of glass showed signifieantly higher capacity and longer cycle life than conventionally made crystalline $LiV_3O_{8}$. In the present paper, we describe the charge / discharge properties during crystallization process and find the best crystallization condition of $LiO_2-P_2O_5-Bi_2O_3-V_2O_5$ glass as cathod material.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.48-56
• /
• 1998

Pr\ulcornerO\ulcorner-based ZnO varistors were fabricated in the range of $Y_2$O$_3$additive content from 0.5 to 4.0mol%, and its microstructure and electrical properties were investigated. Yttrium was distributed nearly in the grain boundaries and the cluster phase formed at nodal point but more in cluster phase. The average grain size was decreased markedly from 34.9 to 8.6${\mu}{\textrm}{m}$ with increasing $Y_2$O$_3$additive content. It is believed that the decrease of grain size is attributed to the formation of cluster phase and the weakening of driving force for liquid sintering. As a result, $Y_2$O$_3$was acted as the inhibitor of the grain growth. With increasing $Y_2$O$_3$additive content, the varistor voltage, the activation energy, and the nonlinear exponent increased whereas the leakage current decreased, especially 4.0mol% $Y_2$O$_3$-added varistor exhibited very good I-V characteristics; nonlinear exponent 87.42 and leakage current 46.77nA. On the other hand, as $Y_2$O$_3$additive content increases, the varistor showed tendency of the salient decrease for donor concentration and the increase for barrier height. Conclusively, it is estimated that ZnO:Pr varistor compositions added more than 2.0mol% $Y_2$O$_3$are to be used to fabricate useful varistors.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1323-1330
• /
• 1995

The effects of various additives on the microstructures of sintered ZnO varistors were examined. Bi2O3, Sb2O3 and Cr2O3 were added to ZnO step by step to identify the effect of each component. The specimens were prepared by sintering at 110$0^{\circ}C$ and 120$0^{\circ}C$ in ambient atmosphere. In ZnO-Bi2O3-Sb2O3 ternary system, decrease of averge grain size due to antimony oxide addition depends on sintering temperature as well as Bi2O3 content. When Sb2O3 was partly or completely replaced by Cr2O3, grain size was further reduced. A significant amount of pyrochlore phase which was not transformed to spinel and Bi2O3-rich liquid phase seemed to remain during sintering at 110$0^{\circ}C$. Unlike ZnO-Bi2O3-Sb2O3 system, the $\alpha$-spinel phase containing significant amount of Cr did not transform to pyrochlore during furnace cooling. Fine spinel particles around 1${\mu}{\textrm}{m}$ size were ovserved within ZnO grains and grain boundaries, which were believed to be responsible for grain-growth inhibition in ZnO-Bi2O3-Sb2O3.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.19-22
• /
• 2015

The joining behavior of YSZ ceramics to the glasses used in the $9Al_2O_3-24ZrO_2-51SiO_2-16R_2O$ and $9Al_2O_3-24ZrO_2-51SiO_2-7La_2O_3-9R_2O$ (wt%) glass systems was investigated. The glass transition and softening temperatures were determined to be $430^{\circ}C$ and $760^{\circ}C$, respectively. The behavior of the contact angle was inversely proportional to an increase in the temperature. The Zr element in YSZ acted as a nucleation agent and contributed to the bonding behavior at the interface.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.54-61
• /
• 2003

$SnO_2$ gas sensor for the detection DMMP, simulant of nerve gas was fabricated and its characteristics were examined. Sensing materials were $SnO_2$ added by TEX>$\alpha$-$Al_{2}O_{3}$ with 0∼20wt.% and $In_{2}O_{3}$ with 0∼3wt.% and were physically mixed each material. They were deposited by screen printing method on alumina substrate. The sensor was consisted of sensing electrode with interdigit(IDT) type in front and a heater in back side. Its dimension was 7$\times$10$\times$0.6$\textrm{mm}^2$. Crystallite size 8t phase identification, specific surface area and morphology of fabricated $SnO_2$ powders were analyzed by X-ray diffraction(XRD), surface area analyzer(BET) and by a scanning electron microscope(SEM), respectively. Sensor was measured as flow type and sensor resistance change was monitored as real time using LabVIEW program. The best sensitivities were 75% at adding 4wt.% TEX>$\alpha$-$Al_{2}O_{3}$, operating temperature $300^{\circ}C$ and 87% at adding 2wt.% $In_{2}O_{3}$, operating temperature $350^{\circ}C$ to DMMP 0.5ppm. Response and recovery times were about 1 and 3 min., respectively. Repetition measurement was very good with $\pm$3% in full scale. As a result, operating temperature was lower TEX>$\alpha$-$Al_{2}O_{3}$ than $In_{2}O_{3}$, but sensitivity was higher $In_{2}O_{3}$ than $\alpha$-$Al_{2}O_{3}$.

• 보존과학연구
• /
• 통권32호
• /
• pp.75-87
• /
• 2011

유물을 처리하기 전에 제작 시기, 기법, 재질 등의 정보를 수집하는 것은 보존처리 방법 결정에 중요하다. 대상유물인 팔사품도는 이순신 장군이 명나라 신종황제로부터 하사받은 팔사품을 그림으로 그린 것으로 바탕재료인 직물에 안료를 이용하여 채색되어 있었으며, 뒷면에는 1장의 종이로 배접이 되어있는 상태였다. 제작연대나 작가 등 유물에 대한 정보가 남아있지 않았기 때문에 유물의 재질 분석을 통해서 제작 연대를 추정해보고, 처리 및 보관 방향을 결정하고자 하였다. 팔사품도의 바탕재료로 사용된 직물의 분석 결과 리본 꼬임과 강낭콩 모양의 단면이 관찰되어 면으로 확인되었다. 배접지에 사용된 종이를 분석한 결과 C 염색액에 의해 오렌지색으로 염색되었으며, 섬유장이 짧고 섬유 측면에 가도관이 관찰되어 침엽수 펄프로 제조된 종이로 추정된다. 또한 채색안료를 분석한 결과 자황(Orpiment, $As_2S_3$), 연단(Minium, $Pb_3O_4$), 석간주(Hematite, $Fe_2O_3$), 화록청[Emerald green, $C_2H_3As_3Cu_2O_8$], 군청(Ultramarine, [$2(Na_2O{\cdot}Al_2O_3{\cdot}2SiO_2){\cdot}Na_2S_2$]), 활석[Talc, $Mg_3Si_4O_{10}\;(OH)_2$] 및 황산바륨($BaSO_4$), 황동(Brass)을 사용한 것으로 추정된다.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.665-668
• /
• 2008

Multi-layered thin films of $Fe_2O_3/Na_3AlF_6/Fe_2O_3/Cu$, Cr, Al were deposited on glass substrate by evaporation process. As high and low refractive index material, $Fe_2O_3$ and $Na_3AlF_6$ were selected and additionally Cu, Al and Cr were chosen as mid reflective layer respectively. Optical properties including reflectance were systematically studied depending on optical thickness of $Na_3AlF_6$ especially $0.25{\lambda}$ and $0.5{\lambda}$. In order to expect the experimental result, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. Based on the results taken by spectrophotometer at viewing angle $45^{\circ}C$, the $Fe_2O_3/Na_3AlF_6/Fe_2O_3/Cu$ show the colour rage between red and orange in $0.25{\lambda}$ and green and pupple in $0.5{\lambda}$ respectively. When the Al was used as mid reflective layers in $Fe_2O_3/Na_3AlF_6/Fe_2O_3$ system, typical yellow colour and mixed colour between green and pupple were appeared in $0.25{\lambda}$ and $0.5{\lambda}$ of $Na_3AlF_6$ respectively. As compared the experimental result to simulation data, it was found out that the experimental data is relatively well matched with the EMP simulation data.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.811-819
• /
• 1989

There have been many studies on the biological phenomena of Bioglasses, which nay be used as implant materials in human body. However, not many works on the Bioglass compositions have been reported. In the present study, the effect of Al2O3 substitution for SiO2 in Bioglass of Na2O-CaO-P2O5-SiO2 system on its structure and properties was examined. Infrared and Raman spectroscopic studies for the glass structural analysis, differential thermal analysis and X-ray diffraction analysis for crystallization of the glass were perfomed. Several physical properties, such as thermal expansion coefficient, softening point, microhardness and reaction phenomena, were also measured. The major crystalline phase, after heat treatment of the glasses, was Na2Ca2(SiO2)3 and the crystal was transformed into other phase with increased substitution of Al2O3. The added Al2O3 reduced non-bridging oxygen in glass structure and thermal expansion coefficient, but increased glass density, sofening point and microhardness. When the glasses are reacted in Tris-buffer solution, the substituted Al2O3 inhibited the formation of hydroxyapatite on the Bioglas surface, and no hydroxyapatite was formed for the sample which contained more than 6wt.% of Al2O3 even if they were reacted for 600 hours.