• 한국진공학회지
• /
• 제19권2호
• /
• pp.128-133
• /
• 2010

ZnO:Al 박막은 산소 압력을 조절한 두 번의 증착 과정을 이용하여, DC 펄스 마그네트론 스퍼터링 방법에 의해 증착되었다. 시드막은 다양한 Ar/$O_2$ 압력비에서 증착되었으며, 벌크막은 순수한 Ar가스를 사용하여 증착되었다. 시드막 증착시 산소 압력이 증가함에 따라, 결정성과 (002) 배향성의 정도는 증가했다. 비저항은 시드가 없는 샘플의 경우 $4.7\times10^4\Omega{\cdot}cm$ cm로부터 Ar/$O_2$ = 9/1 샘플의 경우 $3.7\times10^4\Omega{\cdot}cm$까지, 결정성의 증가와 함께 점차 감소했다. 에칭된 표면은 분화구 형상의 구조를 보여주었으며, 급격한 형상 변화가 결정성 증가와 함께 나타났다. Ar/$O_2$= 9/1 조건의 샘플은 500 nm 에서 88%의 매우 높은 haze 수치를 보여주었으며, 이는 AFM 이미지에서 보여지는 것처럼 큰 표면 구조 크기에 의해 설명된다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.204-209
• /
• 2006

Photo Resist (PR) ashing process was carried out with the atmospheric pressure- dielectric barrier discharge (ADBD) using $SF_6/N_2/O_2$. Ashing rate (AR) was sensitive to the mixing ratio of the oxygen and nitrogen of the blower type of ADBD asher. The maximum AR of 5000 A/min was achieved at 2% of oxygen in the $N_2$ plasma. With increasing the oxygen concentration to more than 2% in the $N_2$ plasma, the discharge becomes weak due to the high electron affinity of oxygen, resulting in the decrease of AR. When adding 0.5% of SF6 to $O_2/N_2$ mixed plasma, the PR AR increased drastically to 9000 A/min and the ashed surface of PR was smoother compared to the processed surface without $SF_6$. Carbon Fluorinated polymer may passivate the PR surface. It was also observed that the glass surface was not damaged by the fluorine.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.51-55
• /
• 2011

We investigated the etching characteristics of zinc oxide (ZnO) thin films deposited by the atomic layer deposition method. The gases of the inductively coupled plasma chemistry consisted of $Cl_2$, Ar, and $O_2$. The maximum etch rate was 40.3 nm/min at a gas flow ratio of $Cl_2$/Ar=15:5 sccm, radio-frequency power of 600 W, bias power of 200 W, and process pressure of 2 Pa. We also investigated the plasma induced damage in the etched ZnO thin films using X-ray diffraction (XRD), atomic force microscopy and photoluminescence (PL). A highly oriented (100) peak was present in the XRD spectroscopy of the ZnO samples. The full width at half maximum value of the ZnO sample etched using the $O_2/Cl_2$/Ar chemistry was higher than that of the as-deposited sample. The roughness of the ZnO thin films increased from 1.91 nm to 2.45 nm after etching in the $O_2/Cl_2$/Ar plasma chemistry. Also, we obtained a strong band edge emission at 380 nm. The intensities of the peaks in the PL spectra from the samples etched in all of the chemistries were increased. However, there was no deep level emission.

• 한국진공학회지
• /
• 제18권4호
• /
• pp.296-301
• /
• 2009

ZnO에 대한 박막증착 연구를 위하여 유도결합 플라즈마 원자층박막증착(inductively coupled plasma assisted atomic layer deposition: ICP-ALD) 장치를 제작하고, 장치에 대한 기본 공정조건을 설정하기 위하여 플라즈마를 유도하지 않은 상태에서 p-type Si(100) 기판 위에 ZnO 박막을 증착하는 다양한 실험을 수행하였다. Zn 전구체(precursor)로는 Diethyl zinc [$Zn(C_2H_5)_2$, DEZn]를, 반응가스(reaction gas)로는 $H_2O$를, 캐리어(carrier) 및 퍼지가스(purge gas)로는 Ar을 사용하였다. 기판온도 $150^{\circ}C$에서 DEZn, $H_2O$, Ar의 공급시간을 변화시켜가면서 자기제한적 표면반응(self-limiting surface reaction)에 의한 박막성장조건을 성공적으로 유도하였다. 기판온도를 변화시켜가면서($90{\sim}210^{\circ}C$) 증착실험을 반복하여, 본 장치에 대한 ALD 공정온도(thermal ALD process window)를 확립하고 성장된 ZnO박막에 대한 증착특성, 결정성, 불순물 및 내부조성비등을 조사하였다. ALD 공정온도는 기판온도 $110{\sim}190^{\circ}C$로써 이 구간에서의 박막 평균증착률은 0.29 nm/cycle로 일정하게 나타났다. 기판온도가 높아질수록 결정성이 향상되어 ZnO(002) 피크가 우세하였다. 모든 ALD 공정온도에서 Zn와 O로만 구성된 고순도의 ZnO 박막을 실현하였는데, 온도가 높아질수록 Zn와 O의 비가 1에 근접하며 안정된 hexagonal wurtzite ZnO 구조의 박막이 성장되었다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.915-918
• /
• 2010

In this work, the etching characteristics of ZnO thin films were investigated using an inductively coupled plasma(ICP) of HBr/Ar/$CHF_3$ gas mixtures. The plasma characteristics were analyzed by a quadrupole mass spectrometer (QMS) and double langmuir probe (DLP). The surface reaction of the ZnO thin films was investigated using X-ray photoelectron spectroscopy (XPS). The etch rate of ZnO was measured as a function of the $CHF_3$ mixing ratio in the range of 0-15% in an HBr:Ar=5:2 plasma at a fixed gas pressure (6mTorr), input power (700 W), bias power (200 W) and total gas flow rate(50sccm). The etch rate of the ZnO films decreased with increasing $CHF_3$ fraction due to the etch-blocking polymer layer formation.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.6-9
• /
• 2012

In this study, we carried out an investigation of the etching characteristics (etch rate, selectivity to $SiO_2$) of ZnO thin films in $N_2/Cl_2$/Ar inductivity coupled plasma. A maximum etch rate and selectivity of 108.8 nm/min and, 3.21, respectively, was obtained for ZnO thin film at a $N_2/Cl_2$/Ar gas mixing ratio of 15:16:4 sccm. The plasmas were characterized by optical emission spectroscopy. The x-ray photoelectron spectroscopy analysis showed the efficient destruction of oxide bonds by ion bombardment. An accumulation of low volatile reaction products on the etched surface was also shown. Based on this data, an ion-assisted chemical reaction is proposed as the main etch mechanism for plasmas containing $Cl_2$.

• 공업화학
• /
• 제25권2호
• /
• pp.204-208
• /
• 2014

본 연구는 1차원 반응기 모델을 이용한 수치 시뮬레이션을 통해 수소투과량, 수소선택도, 사용된 촉매의 양, 급송흐름에서의 $H_2O/CO$ 조성비 및 Ar sweep gas가 막반응기(membrane reactor)에서의 수성가스전이반응의 성능에 미치는 영향을 분석하였다. 막반응기에서 평형상태보다 향상된 수소수율을 얻기 위해선 적어도 100 이상의 수소선택도를 가져야 함이 관찰되었으며, 수소투과량이 계속 증가될 경우에는 수소수율의 증가폭이 점차 감소됨이 보였다. 낮은 수소투과량의 경우에는 촉매량이 증가할수록 초기엔 증가된 CO 전환율을 보이다가 점차 그 증가폭이 감소되었으며, 높은 수소투과량의 경우에는 촉매의 양과 무관하게 높은 CO 전환율이 관찰되었다. 급송흐름에서의 $H_2O/CO$ 조성비가 1.5 이상인 경우엔 수소투과량이 막반응기에서의 CO 전환율에 미치는 영향이 미미하였고, 막반응기에서 평형상태보다 향상된 CO 전환율을 얻기 위해선 적어도 $6.7{\times}10^{-6}mol\;s^{-1}$ 의 Ar 몰유속이 필요함이 밝혀졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.477-477
• /
• 2008

For more than three decades, the gate dielectrics in CMOS devices are $SiO_2$ because of its blocking properties of current in insulated gate FET channels. As the dimensions of feature size have been scaled down (width and the thickness is reduced down to 50 urn and 2 urn or less), gate leakage current is increased and reliability of $SiO_2$ is reduced. Many metal oxides such as $TiO_2$, $Ta_2O_4$, $SrTiO_3$, $Al_2O_3$, $HfO_2$ and $ZrO_2$ have been challenged for memory devices. These materials posses relatively high dielectric constant, but $HfO_2$ and $Al_2O_3$ did not provide sufficient advantages over $SiO_2$ or $Si_3N_4$ because of reaction with Si substrate. Recently, $HfO_2$ have been attracted attention because Hf forms the most stable oxide with the highest heat of formation. In addition, Hf can reduce the native oxide layer by creating $HfO_2$. However, new gate oxide candidates must satisfy a standard CMOS process. In order to fabricate high density memories with small feature size, the plasma etch process should be developed by well understanding and optimizing plasma behaviors. Therefore, it is necessary that the etch behavior of $HfO_2$ and plasma parameters are systematically investigated as functions of process parameters including gas mixing ratio, rf power, pressure and temperature to determine the mechanism of plasma induced damage. However, there is few studies on the the etch mechanism and the surface reactions in $BCl_3$ based plasma to etch $HfO_2$ thin films. In this work, the samples of $HfO_2$ were prepared on Si wafer with using atomic layer deposition. In our previous work, the maximum etch rate of $BCl_3$/Ar were obtained 20% $BCl_3$/ 80% Ar. Over 20% $BCl_3$ addition, the etch rate of $HfO_2$ decreased. The etching rate of $HfO_2$ and selectivity of $HfO_2$ to Si were investigated with using in inductively coupled plasma etching system (ICP) and $BCl_3/Cl_2$/Ar plasma. The change of volume densities of radical and atoms were monitored with using optical emission spectroscopy analysis (OES). The variations of components of etched surfaces for $HfO_2$ was investigated with using x-ray photo electron spectroscopy (XPS). In order to investigate the accumulation of etch by products during etch process, the exposed surface of $HfO_2$ in $BCl_3/Cl_2$/Ar plasma was compared with surface of as-doped $HfO_2$ and all the surfaces of samples were examined with field emission scanning electron microscopy and atomic force microscope (AFM).

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.90-96
• /
• 2001

Catalytic ignition of $H_2/O_2/CO_2$ mixtures over platinum catalyst is experimentally investigated by using microcalorimetry. For comparison, $N_2$ and Ar is also used as diluent gas. The gas mixture flows toward platinum foil heated by electric current at atmosphere pressure and ambient temperature. The ignition temperature range 350-445K according to the fuel ratio, dilution ratio and diluent gas. It increases as the fuel ratio and dilution ratio increase. $H_2/O_2$ mixture with $CO_2$ ignites at higher temperature than with other diluents by 30-50K. Several experimental evidences show the inhibition effects of $CO_2$ in $H_2-O_2$ heterogeneous reaction is considerable

• 센서학회지
• /
• 제9권2호
• /
• pp.146-152
• /
• 2000

고주파 마그네트론 스퍼터링법으로 Li이 도핑된 ZnO(ZnO:Li) 박막을 코닝 7059 글라스 기판상에 증착하였다. 도핑량은 스퍼터링용 ZnO타겟내의 $Li_2CO_3$의 첨가량을 달리하여 조절하였다. 타겟내의 $Li_2CO_3$의 첨가량에 따른 구조적 특성을 XRD, AFM 및 SEM으로 조사하였으며 기판온도, 고주파출력 및 $O_2/Ar$ 가스비에 따른 Li이 도핑된 ZnO박막의 전기적 특성을 조사하였다. 타겟내의 $Li_2CO_3$의 첨가량과 증착조건이 막의 구조적 및 전기적 특성에 미치는 영향을 조사하였다. $Li_2CO_3$의 첨가량이 1wt%이하인 타겟으로 기판온도 $200^{\circ}C$, $O_2$/Ar 가스비 100%, 고주파 출력 100W에서 스퍼터된 ZnO:Li 박막이 표면거칠기가 낮은 우수한 표면형상, 강한 c-축 우선배향성 및 $10^8{\Omega}cm$ 이상의 큰 비저항을 보였다.