• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.466-468
• /
• 2012

Amorphous InGaZnO (${\alpha}$-IGZO) thin-film transistors (TFTs) are are very promising due to their potential use in thin film electronics and display drivers [1]. However, the stability of AOS-TFTs under the various stresses has been issued for the practical AOSs applications [2]. Up to now, many researchers have studied to understand the sub-gap density of states (DOS) as the root cause of instability [3]. Nomura et al. reported that these deep defects are located in the surface layer of the ${\alpha}$-IGZO channel [4]. Also, Kim et al. reported that the interfacial traps can be affected by different RF-power during RF magnetron sputtering process [5]. It is well known that these trap states can influence on the performances and stabilities of ${\alpha}$-IGZO TFTs. Nevertheless, it has not been reported how these defect states are created during conventional RF magnetron sputtering. In general, during conventional RF magnetron sputtering process, negative oxygen ions (NOI) can be generated by electron attachment in oxygen atom near target surface and accelerated up to few hundreds eV by self-bias of RF magnetron sputter; the high energy bombardment of NOIs generates bulk defects in oxide thin films [6-10] and can change the defect states of ${\alpha}$-IGZO thin film. In this paper, we have confirmed that the NOIs accelerated by the self-bias were one of the dominant causes of instability in ${\alpha}$-IGZO TFTs when the channel layer was deposited by conventional RF magnetron sputtering system. Finally, we will introduce our novel technology named as Magnetic Field Shielded Sputtering (MFSS) process [9-10] to eliminate the NOI bombardment effects and present how much to be improved the instability of ${\alpha}$-IGZO TFTs by this new deposition method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.657-659
• /
• 2004

Trivalent cerium ($Ce^{3+}$) activated yttrium aluminum garnet ($Y_3Al_5O_{12}$, YAG) phosphor thin films were deposited on quartz glass substrates by rf magnetron sputtering. The effects of sputtering parameters and annealing condition on the luminescent properties were investigated. The sputtering parameters were $O_2$/Ar gas ratio, rf power, and deposition time. The films were annealed at 1200 $^{\circ}C$ for 5 hours in $N_2+$vacuum atmosphere. Polycrystalline YAG:Ce thin film phosphor could be obtained with a gas ratio of $O_2$/(Ar+$O_2$)=0.5 after post-annealing. PL spectra excited at 450 nm showed a yellow single band at 550 nm.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.264-267
• /
• 2015

AlCrNO cermet films were prepared on aluminum substrates using a DC-reactive magnetron sputtering method and a water-cooled Al:Cr target. The Al₂O₃/AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF)/Al/substrate of the 5 multi-layers was prepared according to the Ar and (N₂ + O₂) gas-mixture rates. The Al₂O₃ of the top layer is the anti-reflection layer of triple AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF) layers, and an Al metal forms the infrared reflection layer. In this study, the crystallinity and surface properties of the AlCrNO thin films were estimated using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), while the composition of the thin films was systematically investigated using Auger electron spectroscopy (AES). The optical properties of the wavelength spectrum were recorded using UH4150 spectrophotometry (UV-Vis-NIR) at a range of 0.3 μm to 2.5 μm.

• 한국진공학회지
• /
• 제7권4호
• /
• pp.300-305
• /
• 1998

rf magnetron sputtering 증착법으로 Al2O3(0001)기판위에 적층생장시킨 Pt박막의 결정성 및 이의 구조적 특성을 backscattering spectrometry(BS)/channeling, transmission electron microscopy(TEM)등을 이용해 분석하였다. $MeV^4$He ion channeling 결과, 증착시 기판의 온도가 $600^{\circ}C$, 증착된 Pt층의 두께가 3500$\AA$이었을 때 최소산란수율(channeling minimum yield)이 4%인 결정성이 우수한 Pt박막이 생장되었음을 확인하였으며, 동일한 증 착조건하에서 증착된 Pt층은 $Al_2O_3$(0001)기판위에 6중 대칭구조를 지닌(111)면방향으로 적층 생장되었으며, (111)면방향을 중심으로 대칭적인 원자배열 구조를 갖고 있는 쌍정구조를 형 성하고 있었다. 단면 TEM 분석결과에서도 격자부정합에 의한 strain을 감소시키기 위하여 형성된 쌍정을 관찰할 수 있었으며 strain이 집중되는 쌍정경계면에서 표면거칠기의 증가 또는 관찰되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.96-97
• /
• 2012

In nitride and oxide film deposition, sputtered metals react with nitrogen or oxygen gas in a vacuum chamber to form metal nitride or oxide films on a substrate. The physical properties of sputtered films (metals, oxides, and nitrides) are strongly influenced by magnetron plasma density during the deposition process. Typical target power densities on the magnetron during the deposition process are ~ (5-30) W/cm2, which gives a relatively low plasma density. The main challenge in reactive sputtering is the ability to generate a stable, arc free discharge at high plasma densities. Arcs occur due to formation of an insulating layer on the target surface caused by the re-deposition effect. One current method of generating an arc free discharge is to use the commercially available Pinnacle Plus+ Pulsed DC plasma generator manufactured by Advanced Energy Inc. This plasma generator uses a positive voltage pulse between negative pulses to attract electrons and discharge the target surface, thus preventing arc formation. However, this method can only generate low density plasma and therefore cannot allow full control of film properties. Also, after long runs ~ (1-3) hours, depends on duty cycle the stability of the reactive process is reduced due to increased probability of arc formation. Between 1995 and 1999, a new way of magnetron sputtering called HIPIMS (highly ionized pulse impulse magnetron sputtering) was developed. The main idea of this approach is to apply short ${\sim}(50-100){\mu}s$ high power pulses with a target power densities during the pulse between ~ (1-3) kW/cm2. These high power pulses generate high-density magnetron plasma that can significantly improve and control film properties. From the beginning, HIPIMS method has been applied to reactive sputtering processes for deposition of conductive and nonconductive films. However, commercially available HIPIMS plasma generators have not been able to create a stable, arc-free discharge in most reactive magnetron sputtering processes. HIPIMS plasma generators have been successfully used in reactive sputtering of nitrides for hard coating applications and for Al2O3 films. But until now there has been no HIPIMS data presented on reactive sputtering in cluster tools for semiconductors and MEMs applications. In this presentation, a new method of generating an arc free discharge for reactive HIPIMS using the new Cyprium plasma generator from Zpulser LLC will be introduced. Data (or evidence) will be presented showing that arc formation in reactive HIPIMS can be controlled without applying a positive voltage pulse between high power pulses. Arc-free reactive HIPIMS processes for sputtering AlN, TiO2, TiN and Si3N4 on the Applied Materials ENDURA 200 mm cluster tool will be presented. A direct comparison of the properties of films sputtered with the Advanced Energy Pinnacle Plus + plasma generator and the Zpulser Cyprium plasma generator will be presented.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.430-430
• /
• 2012

Modulated pulsed power (MPP) 스퍼터링은 펄스 전압 shape, amplitude, duration의 modulation을 통해 증착율 손실을 극복하는 고출력 펄스 마그네트론 스퍼터링의 한 종류이다. Micro second 범위에서 on/off 시간을 다중 세트 형태로 자유롭게 프로그램 할 수 있어서 아킹 없이 고전류 영역의 마그네트론 동작을 할 수 있으므로, 고주파 유도 결합 플라즈마원이나 마이크로웨이브 투입 등의 부가적인 플라즈마 없이도 스퍼터링 재료의 이온화 정도를 획기적으로 높일 수 있는 장점을 가지고 있다. 본 연구에서는 $2{\times}1{\times}0.2$의 sputtering system에서 기판 캐리어를 이용해서 $400{\times}400mm$ 기판을 $272{\times}500mm$ 크기의 AZO target (Al 2 wt%)이 설치되어 있는 moving magnet cathode (MMC)을 이용하여 MPP로 증착했다. 두 종류의 micro pulse set을 하나의 macro pulse에 사용함으로서 weakly ionized plasma와 strongly ionized plasma를 만들 수 있다. 다양한 micro pulse set을 이용하여 평균 전력 2 kW에서 peak 전력을 4 kW에서 45 kW까지 상승 시킬 수 있으며, 이 때 타겟-기판 거리 80 mm에서 이온전류밀도는 $5mA/cm^2$에서 $20mA/cm^2$까지 상승했다. MPP는 같은 평균 전력에서 repetition frequency가 증가할 때, 증착 속도가 증가했으며, 같은 repetition frequency에서 macro pulse length가 증가할 때도, 증착 속도가 증가했다. 최적화된 marco, micro pulse set에서 증착 속도는 평균 전력 2 kW에서 110 nm/min이었고, 700 nm의 박막에서 비저항은 $1-2{\times}10^{-3}ohm{\cdot}cm$였다. 표면거칠기 Rrms는 약 3 nm였고, 400-700 nm 영역의 평균 투과도는 72-76%였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.145-145
• /
• 1999

La-Ca-Mn-O (LCMO) 박막에서 초거대 자기 저항 효과와 발견된 이후 자기 센서와 고밀도 자기 저장 매체로서 응용하기 위한 연구가 진행되고 있다. 그러나 현재 대부분의 증착은 타겟과 박막간의 조성의 일치를 위하여 PLD 방법을 이용하고 있으며 RF magnetron sputtering 법으로 증착한 예는 많이 보고되고 있지 않으며 특히 적층 성장시킨 예는 아직 보고되지 있지 않다. 또한 LCMO와의 낮은 격자 상수 불일치를 보이는 SrTiO3와 LaAlO3 기판에 LCMO 박막을 성장시킬 경우 LaAlO3의 경우 XRD rocking curve의 curve의 FWHM 값이 SrTiO3 상에 증착시킨 것의 10배 이상의 값을 보인다는 것은 주목할 만한 사실이다. RF magnetron sputtering 법을 이용하여 LaAlO3 기판상에 145nm MCMO 박막을 적층성장시켰다. XRD $ heta$-2$\theta$ scan을 통해 박막이 c-축 배향한 것을 확인할 수 있었으며 RBS 분석결과 4.98%의 minimumyield를 보였으며 이로부터 박막이 적층성장한 것을 확인할 수 있었다. LCMO (200) peak의 XRD $\theta$-rocking 결과 FWHM의 값은 0.311$^{\circ}$를 보였으나 2개의 피크가 존재하는 것을 볼 수 있었다. 따라서 기판의 (200) 피크를 XRD $\theta$-2$\theta$ scan에서 0.3$^{\circ}$ 간격으로 두 개의 피크를 관찰할 수 있었는데 이는 기판과 박막간의 stress로 인한 tetragonal distortion에 의한 것으로 알려져 있었다. 따라서 기판상에 박막이 어떤 식으로 적층 성장되었는지를 RBS를 이용하여 <001>과 <011> 방향으로 2MeV He++를 주입하여 0.1$^{\circ}$ 간격으로 틸팅을 해본 결과 <001> 방향에서는 1.12$^{\circ}$의 차이를 보였다. 이는 기판과의 compressive stress로 인해 c축 방향으로 늘어났으며 stress relaxed layer는 XRD 결과와는 달리 관찰할 수 없었다. 이러한 현상의 기판 자체의 twin 구조로 인한 것으로 생각된다. RBS 분석후 고분해능 XRD를 이용해 LCMO (200) peak의 $\theta$-rocking 결과 이제R지 laAlO3 상 증착한 LCMO의 값으로는 제일 작은 0.147$^{\circ}$를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1254-1255
• /
• 2008

Low cost TCO(Transparent Conductive oxide) thin films were prepared by 6" DC/RF magnetron sputtering systems. For the AZO preparation processes a 99.99% AZO target (Zn: 98 wt.%, $Al_2O_3$: 2 wt.%) was used. In order to verify the optical properties of the AZO thin films, the transparency was tested with sputtering conditions using UV-visible spectroscopy. As a result, we got the transmittance properties over 80% and low resistivity in the sputtering conditions of DC 200[W], Ar 30 [sccm], 1 [mtorr], 20 [min].

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.753-758
• /
• 2003

Ti films were deposited onto 100${\times}$100 mm alumina substrates using dc magnetron sputtering under the following conditions; substrate temperature of R.T～400 $^{\circ}C$, annealing temperature of 100～400 $^{\circ}C$, and sputtering gas pressure of 4${\times}$10$^{-3}$ Torr～4${\times}$10$^{-2}$ Torr. And the films were examined by X-ray diffraction analysis (XRD), scanning electron microscopy(SEM) and 4-point measurement system. The best electrical and structural properties was obtained by substrate temperature of ～200 $^{\circ}C$, target-substrate distance of ～14 cm and sputtering pressure of ～1${\times}$10$^{-2}$ Torr. Also at that condition the most excellent adhesion was observed.

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.372-375
• /
• 2017

ZnO thin films were deposited by RF magnetron sputtering and then diffused by using an As source in the ampouletube. Also, the ZnO p-n homojunction was made by using As-doped ZnO thin films, and its properties were analyzed. After the As doping, the surface roughness increased, the crystal quality deteriorated, and the full width at half maximum was increased. The As-doped ZnO thin films showed typical p-type properties, and their resistivity was as low as $2.19{\times}10^{-3}{\Omega}cm$, probably because of the in-diffusion from an external As source and out-diffusion from the GaAs substrate. Also, the ZnO p-n junction displayed the typical rectification properties of a p-n junction. Therefore, the As diffusion method is effective for obtaining ZnO films with p-type properties.