• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.604-610
• /
• 2011

The effect of $BaF_2$ flux in $Y_3Al_5O_{12}:Ce^{3+}$(YAG:Ce) formation was investigated. Phase transformation of $Y_3Al_5O_{12}$(YAG) was characterized by using XRD, SEM, and TEM-EDS, and it was revealed that the sequential formation of the $Y_4Al_2O_9$(YAM), $YAlO_3$(YAP) and $Y_3Al_5O_{12}$(YAG) in the temperature range of 1000-1500$^{\circ}C$. Single phase of YAG was revealed from 1300$^{\circ}C$. In order to find out the effect of $BaF_2$ flux, three modeling experiments between starting materials (1.5$Al_2O_3$-2.5$Y_2O_3$, $Y_2O_3$-$BaF_2$, and $Al_2O_3$-$BaF_2$) were done. These modeling experiments showed that the nucleation process occurs via the dissolution-precipitation mechanism, whereas the grain growth process is controlled via the liquid-phase diffusion route. YAG:Ce phosphor particles prepared using a proposed technique exhibit a spherical shape, high crystallinity, and an emission intensity. According to the experimental results conducted in this investigation, 5% of $BaF_2$ was the best concentration for physical, chemical and optical properties of $Y_3Al_5O_{12}:Ce^{3+}$(YAG:Ce) that is approximately 10-15% greater than that of commercial phosphor powder.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.27-35
• /
• 2006

In order to use alunite as an activator of blast furnace slag, we studied the hydration characteristics of the calcined alunite and the ground blast furnace slag. The alunite calcined at $650{\cire}C$ consists of KAl($KAl(SO_{4})_{2}$ and $Al_{2}O_{3}$. The calcined alunite reacts with $Ca(OH)_{2}$ and gypsum to form etrringite ($3CaO{\cdot}Al_{2}O_{3}{\cdot}3CaSO_{4}{\cdot}32H_{2}O$) as fellows:$2KAl(SO_{4})_{2}+2Al_{2}O_{3}+13Ca(OH)_{2}+5CaSO_{4}{\cdot}2H_{2}O+73H_{2}O{\rightarrow}3(3CaO{\cdot}Al_{2}O_{3}{\cdot}3CaSO_{4}{\cdot}32H_{2}O)+2KOH$. The $SO_{4}^{2-}$ ions from calcined alunite reacts with CaO in blast furnace slag to from gypsum, which reacts with CaO and $Al_{2}O_{3}$ to from ettringite in calcined alunite-blast furnace slag system. Therefore blast furnace slag can be activated by calcined alunite.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.164-169
• /
• 2014

We investigated the etching characteristics of $HfAlO_3$ thin films in $O_2/Cl_2/Ar$ and $O_2/BCl_3/Ar$ gas, using a high-density plasma (HDP) system. The etch rates of the $HfAlO_3$ thin film obtained were 30.1 nm/min and 36 nm/min in the $O_2/Cl_2/Ar$ (3:4:16 sccm) and $O_2/BCl_3/Ar$ (3:4:16 sccm) gas mixtures, respectively. At the same time, the etch rate was measured as a function of the etching parameter, namely as the process pressure. The chemical states on the surface of the etched $HfAlO_3$ thin films were investigated by X-ray photoelectron spectroscopy. Auger electron spectroscopy was used for elemental analysis on the surface of the etched $HfAlO_3$ thin films. These surface analyses confirm that the surface of the etched $HfAlO_3$ thin film is formed with nonvolatile by-product. Also, Cl-O can protect the sidewall due to additional $O_2$.

• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.37-41
• /
• 1985

Several $Al_2O_3$-based polycrystalline which had different dopant ratio in the range of 0.5mol% were prepared by doping pure $Cr_2O_3$, $ZrO_2$, $HfO_3$ Single crystalline which had same composition with above polycrystalline were made by means of floating zone method. This study examined the role of each dopant for enhancing the mefchanical properties of $Al_2O_3$-based Ceramics. Optical micrographs $({\times}200)$ of $Al_2O_3-Cr_2O_3$ single crystal showing not only radial crack (rc) on the specimen surface but median crack (mc) and lateral crack (lc) under surface at the edge of indentation mark. Fracture toughness of $Al_2O_3$-based Ceramics was increased with $ZrO_2$ content. Alloying effect of $Cr_2O_3$ contributed to the hardness of $Al_2O_3$ based ceramics.

• Korean Journal of Materials Research
• /
• v.13 no.4
• /
• pp.213-218
• /
• 2003

Fibrous monolithic control of$ Al_2$$O_3$ -$ZrO_2$composite was investigated by multi-pass extrusion process. To obtain sound $Al_2$$O_3$-X $O_2$sintered bodies, burning out and sintering process were carefully carried out. The sintered bodies showed continuous, fibrous monolithic microstructure without any swelling. Many microcracks were observed at the $Al_2$$O_3$-$ZrO_2$interfaces due to the mismatching of thermal expansion coefficient between $Al_2$$O_3$ and $ZrO_2$phase. Most of m- $ZrO_2$grains included twin defects such as (001), (010) and (011) type to accommodate the phase transformation induced stress.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.269-277
• /
• 1995

Ultrafine TEX>$Al_2O_3$ powders were prepared from $AlCl_3$ and $Al_2(SO_4)_3$3 by using inductively coupled plasma (lCP) of ultrahigh temperature (above 5000 K) in heat source. The prepared $Al_2O_3$ powders had ${\alpha} - group ({\alpha}, {wdelta} ;and; {\theta})$ phase, a narrow size distribution and around 20 nm in meansize. It could be suggested that gas - solid reaction growth and interparticle sintering occured at the center of ICP tail flame (X = 500 mm) through the results of deposited aggregates - flock, whisker and platy on MgO polycrystal plate. And the formation mechanism of $Al_2O_3$ powders In spray - ICP reactor were described from upper results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.118-118
• /
• 2010

현재 반도체 제조 공정 중 많은 비중을 차지하는 식각 및 증착 공정에는 대부분 플라즈마를 사용하고 있으며, 이러한 반도체 장비내의 공정 부분품들은 수율과 생산성을 향상시키기 위하여 내플라즈마 특성이 우수한 세라믹 또는 세라믹 코팅막으로 구성되어 있다. 더욱이 최근에는 미세공정을 위해 고밀도 플라즈마 공정이 요구되면서, 노출된 세라믹 층이 침식되어 파티클이 떨어져 나오거나 모재와 세라믹 막 사이의 박리현상과 같은 심각한 문제들이 발생되고 있다. 따라서 보다 우수한 내플라즈마 특성을 갖는 세라믹 코팅 기술 개발이 시급한 실정이다. 현재 내플라즈마성 세라믹 코팅막 제조를 위한 코팅기술로서는 주로 용사법이 이용되고 있으나 기공률이 높고 치밀하지 못한 등의 문제점으로 인하여 사용수명이 짧다는 한계에 봉착하였다. 이에 본 연구에서는 상온에서 치밀하고 고속으로 세라믹 후막 형성이 가능한 Aerosol Deposition (AD)법과 AD법의 단점인 edge, corner, hole에서 코팅이 잘 안 되는 점을 보완할 수 있는 Arc Plasma Anodizing (APA)법을 조합하여, 상용화된 Al 모재위에 APA법을 사용하여 $Al_2O_3$ 후막 중간층을 형성한 뒤 그 위에 AD법으로 치밀한 $Al_2O_3$ 후막 성막함으로써 내 플라즈마 향상을 위한 새로운 개념의 제조기술개발을 시도하였다. 이를 위해 우선 Al 모재 위에 APA를 사용하여 중간층인 $Al_2O_3$막을 제조하였으며, 중간층의 두께에 따른 특성을 확인한 결과, $Al_2O_3$중간층의 두께가 두꺼워질수록 표면조도가 증가함을 확인 할 수 있었다. AD법으로 $Al_2O_3$중간층 위에 치밀한 $Al_2O_3$막을 제조하는데 있어 중요인자를 확인하기 위해, AD법으로 중간층 위에 $Al_2O_3$막을 제조한 후 성막특성을 관찰하였다. 그 결과, 중간층의 표면조도가 $0.8-1\;{\mu}m$인 경우에는 수 ${\mu}m$의 두께로 성막 되었으나, 표면조도가 $1\;{\mu}m$ 이상인 $Al_2O_3$중간층 위에서는 성막 되지 않았다. 이를 통해 AD법으로 치밀하고 두꺼운 $Al_2O_3$ 후막을 $Al_2O_3$중간층 위에 성막하기 위해서는 표면조도가 중요인자임을 확인하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.123-128
• /
• 2004

Both photoluminescence and the long-phosphorescent properties for $SrAl_2O_4$ : Eu$^{+2}$, $Dy^{+3}$ phosphor powder synthesized by the solid phase reaction were investigated as a function of $B_2O_3$ composition (0-10 wt%). The highest emission wavelength (520nm) of photoluminescence spectra was not affected by $B_2O_3$concentration. The highest emission intensity was obtained by the concentration of 3 wt% $B_2O_3$.After the removal of the Xenon lamp excitation (360nm), also, the excellent long-phosphorescent property of the phosphors was obtained by the concentration of 3 wt% $B_2O_3$ although the decay times for all phosphors decreased exponentially.

• Korean Journal of Plant Resources
• /
• v.20 no.1
• /
• pp.12-21
• /
• 2007

Ginsengs (1,2 3 years) from the Keumsan are analysed for the inorganic compounds and compared with the their soils from the granite, phyllite and shale areas. In the soils, the granite areas show high $Al_2O_3\;and\;Na_2O$ contents while the phyllite areas have high $Fe_2O_3,\;MnO\;and\;MgO$ contents. Positive correlations are shown in the $Al_2O_3-K_2O\;and\;Fe_2O_3-MgO$ pairs while negative correlations are shown in the $SiO_2-CaO$ pair. In the ginsengs, the shale areas are high in the most of the elements, but low in the granite areas. Compared with same soils of different ages, Al, Na and Ti contents of the ginsengs are high in the all areas. The shale areas are mainly high in the upper parts while the granite areas are mainly high in the root parts. Regardless of the localities, Fe, Mn and Ca contents are high in the upper parts while Ti contents are high in the root parts with differences of several times. Relative ratios between field soils and ginsengs (field soil/ginseng) suggest that the ginsengs show high Ca contents with differences of several ten times whereas the soils have high Na, Fe, Ti and Al contents with differences of several times. Regardless of the localities, the ratios of the Al, Mn and Na are high in the 2 year relative to the 3 year. Overall ratios between field soils and ginsengs are mainly big in the 2 year area relative to the 3 year area. It suggests that contents of the 3 year ginsengs are more similar to those of their soils relative to the 2 year and the ginsengs may absorpt eligible element contents with increasing ages.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.968-980
• /
• 1995

Al/Al$_{2}$O$_{3}$/C hybrid metal matrix composites are fabricated by the direct squeeze infiltration method. From the microstructure of Al/Al$_{2}$O$_{3}$/C composites, uniform distribution of reinforcements and good bondings are found. Optimum processing conditions for preforms and squeeze castings are suggested. Mechanical properties, such as elastic modulus, elongation, 0.2% offset yield strength and ultimate tensile strength are obtained. Through the abrasive were test and wear surface analsis, wear behavior and its mechanism of AC2B aluminum and Al/Al$_{2}$O$_{3}$/C composites can be characterized under various sliding speed conditions. Tensile strenght elongation of Al/Al$_{2}$O$_{3}$/C composites are decreased with increasing the addition of carbon fiber. On the contrary, elastic modulus of Al/Al$_{2}$O$_{3}$/C composites is slightly improved compared with that of the unreinforced matrix alloy. The addition of carbon fiber to al/al$_{2}$O$_{3}$/C composites gives rise to improvement of the wear resistance. Specially, carbon chopped fibers play an important role in interfering sticking between the counter material and metal matirix composites. Al/Al$_{2}$O$_{3}$/C composites are suitable to high speed due to solid lubication of carbon. And wear model of Al/Al$_{2}$O$_{3}$/C composites is suggested by the examination of worn surfaces.