• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.5-13
• /
• 2006

Based on the inventions of continuous ceramic fibers, such as C, SiC, $Al_2O_3$ etc., by polymer precursor driven methods, there have been many efforts to fabricate ceramic continuous fiber reinforced composite materials with metals and ceramics matrices. The main purpose of the R & D efforts has been to produce materials for severe environments, including advanced energy systems, advanced transportation systems. The efforts have been started from the R & D of metal matrix composite materials and now the strong emphasis on ceramic matrix composites R & D can be recognized. This paper provides a brief review about the national efforts to establish advanced composite materials for future industries starting from mid 70s. C/Al and SiC/Al are the typical examples to be applied transportation systems and energy systems. The excellences in specific strength and overall mechanical properties, the excellences in environmental resistance make those materials as potential materials for advanced ocean construction and marine transportation systems. About the recent progress in ceramic fiber reinforced ceramic composites, advanced SiC/SiC composites including NITE-SiC/SiC will be introduced and the present status will be introduced.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.170-176
• /
• 2006

Multi-layered laminate made of ceramic/composite have been developed to prevent penetration by high velocity impact. In this study, three-layered plates consisted of 1) cover layer (glass fiber reinforced polymer), 2) $Al_{2}O_{3}$, ceramic plate, and 3) backing plate (glass fiber reinforced polymer) were fabricated with various conditions and tested for their ballistic protection characteristic. The ceramic composite laminates, with thin backing plate, were completely penetrated by armor piercing projectile. The plate with inserted rubber between ceramic and backing plate showed excellent ballistic protection, though completely penetrated by the second shoot.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.325-326
• /
• 2006

Using $6wt%Y_2O_3-2wt%Al_2O_3$ as sintering additives and Si as a raw powder, the continuously porous in-situ $Si_2N_2O-Si_3N_4$ bodies were fabricated by multi-pass extrusion process and their microstructures were investigated depending on the addition of carbon (0-9wt%) in the mixture powder. The introduction of $Si_2N_2O$ fibers observed in the unidirectional continuous pores as well as in the pore-frame regions of the nitrided bodies can be an effective method in increasing the filtration efficiency. In the case of no carbon addition, the network type $Si_2N_2O$ fibers with high aspect ratio appeared in the continuous pores with diameters of 150-200 nm. However, in the case of 9wt% C addition, the fibers were found without any network type and had diameters of 200-250 nm.

• Composites Research
• /
• 제32권6호
• /
• pp.368-374
• /
• 2019

무기필러가 첨가된 현무암섬유 강화 에폭시 복합재료를 제조하여 그 특성을 평가하였다. 첨가된 무기필러는 각각 수산화마그네슘, 수산화알루미늄, 알루미나, 베마이트이며 이를 첨가제로한 에폭시 수지를 현무암섬유에 핸드레이업으로 함침시킨 후 hot pressing하여 수지 함침량이 30 wt%인 섬유복합재료를 제조하였다. LOI 평가 결과 BFRP의 LOI (28.9)는 에폭시 수지 (21.4)에 비해 향상된 것을 확인하였으며 무기필러가 첨가될 경우 그보다 더욱 향상되는 것을 확인하였다. 또한 무기필러가 첨가된 복합재료는 무기필러가 첨가되지 않은 복합재료에 비해 콘칼로리미터 시험에서 PHRR, THR, TSR 등이 감소하여 무기필러 첨가에 따른 난연 특성 향상을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.73-76
• /
• 2002

This study developed SiC/Al composites for electronic packaging to which reinforcements were added with the volume fractions of 49%, 56% and 63% by the squeeze casting method. 0.8 wt.% of the inorganic binder as well as the $Al_2O_3$ fiber and SiC particles with the volume fraction of 1:10 were added to the SiC/Al composites For the produced SiC/Al composites, the CTEs (coefficients of thermal expansion) were measured from 30 to $300^{\circ}C$ and compared with the FEM numerical simulation to analyze the temperature dependent properties. The experiment showed the CTEs of SiC/Al composites that were intermediate values of those of Rule of Mixture and Turner's Model. The CTEs were close to Turner's Model in the room temperature and approached the Rule of Mixture as the temperature increases. These properties analyzed from the difference of the average stress acting between the matrix and the reinforcements proposed in this study

• Membrane and Water Treatment
• /
• 제12권2호
• /
• pp.75-82
• /
• 2021

This study aimed to prepare a W/O nonionic microemulsion system(MEs) consisting of OP-4[polyoxyethylene(4) nonylphenol], OP-7[polyoxyethylene(7) nonylphenol], 1-hexanol, D2EHPA, kerosene and HCl solution and applied to the extraction of La(III) from chloride aqueous solution within the polysulfone hollow fiber contactor (HFC),laboratory-scale experiments were carried out to investigate the recovery of La(III) using as-prepared microemulsion from the simulation wastewater containing La(III),Al(III) and Fe(III). The right weight ratio(Rs) of OP-4 to OP-7 was firstly confirmed through determination of the solubilization capacity of HCl solution(W0,HCl) in microemulsion, the effect of several factors such as the HCl concentration, temperature and effective extraction time on the extraction efficiency of La(III) was discussed. Results showed that the acceptable Rs was 4:6 to prepare the W/O MEs. The extraction yield of La(III) increased with the increasing of HCl concentration, temperature and effective extraction time and reaches to 97.3% while using five-stage modules. The recovery yield of La(III) from simulation La-bearing wastewater was 90.6%.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.402-411
• /
• 2012

천연 복분자는 나무딸기 또는 산딸기로부터 얻어진 한방재료로 사용되어 지고 있다. 천연 복분자 나무딸기 또는 산딸기는 천연의 향기와 맛, 천연의 색상, 그리고 약리, 화학적 특성을 가지고 있다. 천연 복분자 추출물을 사용하여, 특성실험으로 미생물에 대한 항균실험과 섬유에 대한 염색실험을 하였다. 본 특성실험에서 다음과 같은 결론들이 얻어졌다. 항균실험 결과 ATCC-001(staphylococcus aureus)의 경우는 배양시험 후 72hrs 부터 미생물이 거의 나타나지 않았으나 ATCC-002(aspergillus niger)의 경우 배양시험 후 시간경과에 따라 계속 증식이 나타났다. 역시, 염색실험 결과 복분자 추출물이 천연염료로 매염제($Al_2(SO_4)_3{\cdot}13-14H_2O$)를 사용하여 섬유인 면과 견에서 연한 베이지 색의 방향으로 염색이 나타났다. 기기분석 결과 1CP/OES로 측정한 복분자 성분에서는 K(221.100ppm), Mg(17.920ppm), Ca(5.129ppm), Na(2.940ppm), Si(0.638ppm)등의 무기성분들이 확인되었고, GC/MSD로 측정한 복분자 성분에서는 Boric acic(1.711), Silane(2.142), Propyl isothiocyanate(2.565), Pyrazole(3.481), Furfurole(11.521)등의 유기성분들이 확인되었다.

• 한국광학회지
• /
• 제25권2호
• /
• pp.72-77
• /
• 2014

본 논문에서는 초소형의 광섬유 결합형 테라헤르츠 모듈을 이용하여 테라헤르츠 시간영역 분광 및 영상 시스템을 구성하였다. 구성된 THz 분광 시스템을 이용하여 3 THz 이상의 자유공간에 분포되어 있는 수분의 고유 흡수 스펙트럼을 관측하였고 테라헤르츠 대역에서의 Si, $Al_2O_3$, GaAs기판에 대한 굴절률을 측정하였으며 측정을 위해 다중 반사를 고려한 전달 함수를 이용한 굴절률 측정 방법을 이용하였다. 또한, 테라헤르츠 영상 시스템을 이용하여 의료용 칼과 클립을 측정하여 250 ${\mu}m$ 간격으로 $192{\times}89$ 픽셀의 영상을 얻었다.

• 대한환경공학회지
• /
• 제39권3호
• /
• pp.112-117
• /
• 2017

PAN 기반 아크릴계 섬유와 DETA 및 $AlCl_3{\cdot}6H_2O$를 반응시켜 아민기($-NH_2$)를 가진 이온교환섬유 PADD를 합성하였다. 개발된 섬유상 소재는 FT-IR과 SEM을 이용하여 그 특성을 확인해 보았다. 회분식 실험으로 수행된 PADD를 이용한 크롬제거 실험 결과는 Langmuir 등온흡착모델에 잘 적용되었으며, 이때 계산된 이론적 최대흡착능 ($Q_{max}$)은 6.93 mmol/g으로 나타났다. 한편 동적흡착실험은 Lagergren 유사이차속도모델에 잘 부합되었다. PADD의 크롬 흡착능은 pH 2에서 가장 높은 값인 4.11 mmol/g을 나타내었고 pH 변화에 많은 영향을 받는 것으로 확인되었다. 또한, 인산과 비소(V)에 대한 공존이온 실험을 통해 PADD가 크롬에 대한 높은 선택성을 갖고 있음을 확인할 수 있었다. 산-염기 역적정으로 구한 PADD의 총이온교환능 (4.70 mmol/g)을 통해 소재의 선택적 제거 가능성을 검증하였다.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.693-698
• /
• 1997

The refractive index and dispersion in the (100-x)(0.6CaO.0.4Al2O3).xSiO2(x=0~30) glasses were investigated. As the amount of SiO2 increased, the refractive index decreased. The change of refractive index was attributed to the change of the molar refraction rather than the molar volume. When the amount of SiO2 was smaller than 20 mol%, the average electronic transition energy gaps(E0) and the electronic oscillator strengths(Ed) were about 10.9($\pm$0.1) nd 18($\pm$0.5)eV, respectively. However E0 and Ed of the glass (CAS30) with 30 mol% SiO2 increased to 12.63 and 19.89eV, respectively. The similar results was observed in the variation of Abbe Number. Abbe number of the glass in the range of 0~20 mol% SiO2 was about 46 and that of CAS30 increased to 60. The zero-material dispersion wavelength({{{{ lambda }}0) of pure calcium aluminate glass was 1.8 ${\mu}{\textrm}{m}$. As the amount of SiO2 increased, the zero-material dispersion wavelength shifted to a shorter wavelength. {{{{ lambda }}0 of CAS30 was 1.5 ${\mu}{\textrm}{m}$, that is currently using for the optical telecommunication system.