• Journal of Hydrogen and New Energy
• /
• v.10 no.2
• /
• pp.141-149
• /
• 1999

Recently the Ni/MH secondary battery has been studied extensively to achieve higher energy density, longer cycle life and faster charging-discharging rate etc. In this work, the electrode properties of $(LM)Ni_{4.49}Co_{0.1}Mn_{0.205}Al_{0.205}$ alloy and $Ti_{0.6}Zr_{0.4}V_{0.6}Ni_{1.4}$ alloy with addition of Pd were investigated. These alloys did not show any change in XRD pattern by Pd addition. As Pd was added as alloy element, the activation behavior was not affected significantly in both $AB_2$ type and $AB_5$ type electrodes and, On charging and discharging in high current density, Discharge capacity with increasing of Pd content was more decreased. But cycle life was showed increasing. Especially the electrode of $Ti_{0.6}Zr_{0.4}V_{0.6}Ni_{1.4}+0.5wt%$ Pd alloy was not almost decreased discharge capacity for 400cycles.

• Journal of Hydrogen and New Energy
• /
• v.18 no.1
• /
• pp.52-59
• /
• 2007

We investigated the effects of the addition of Mn and $AB_5$ type alloy on the electrochemical characteristics of Ti-Cr-V BCC type alloys as anode materials for Ni-MH battery. The activation behavior and discharge capacity of the BCC type alloys were significantly improved by ball-milling with the $LmNi_{4.1}Al_{0.25}Mn_{0.3}Co_{0.65}$ alloy, because the $AB_5$ type alloy acted as hydrogen path on the surface of the BCC type alloy. Among the Mn substituted alloys($Mn=0.03%{\sim}0.08%$), the $Ti_{0.32}Cr_{0.38}Mn_{0.05}V_{0.25}$ alloy ball-milled with $AB_5$ type alloy exhibited the greatest discharge capacity of $336\;mAh{\cdot}g^{-1}$. In addition, Mn substituted alloys exhibited the lower plateau pressure in P-C- T curve, the better hydrogen storage capacity and faster surface activation compared with the alloy without Mn.

• The Korean Journal of Zoology
• /
• v.18 no.2
• /
• pp.51-60
• /
• 1975

The present study was performed histologically and histochemically to observe the cutaneous mucous glands in the frog, Rana nigromaculata during metamorphosis. The cutaneous thssues including dermal plicae in the dorsal portions of the frog tadpoles at each metamorphosis stage were fixed in 10% buffered formalin at$4^{\circ}C$, embedded in paraffin wax, sectioned 4 $\mu$m thickness and stained with periodic acid-Schiff(PAS) and alcian blue (AB) at both pH 2.5 and pH 1.0. The results of observation were as follows: 1. The developments of cutaneous mucous glands of the frog tadpole were begun with appearance of gland cell nest in the dermis at metamorphosis XV stage and significant numerical increases could be seen at metamorphosis XX, XXIII and XXIV stages. 2. This cutaneous mucous gland of the frog tadpole could be divided into two types; A-type glands showed strong positivities to both PAS and AB at pH 2.5 in the gland body cells and to PAS in the gland neck cells, and B-type glands at AB pH 2.5 in the gland body cells. 3. In the A-type mucous glands, the reactivities of the glandular epithelial cells to both PAS and AB stain could be first seen at the metamorphosis XIX stage of frog tadpole. The reactivities of the glandular epithelial cells to both PAS and AB pH 2.5 were gradually increased according to the process of metamorphosis after XX stage of metamorphosis. 4. The B-type mucous glands were first seen at the XX stage and the reactivity of the glandular epithelial cells to AB at pH 2.5 was gradually increased according to the process of metamorphosis after XX stage. 5. The A-type and the B-type mucous glands were in the ratio of 99 : 1, 7 : 3 and 5.5 : 4.5 for each of metamorphosis XX, XXI-XXII and XXIII-XXV stages. 6. The remarkable development of the cutaneous mucous glands of the frog tadpoles might be needed to maintain water and electrolyte balances according to the change of way from aquatic life to amphibious.

• Journal of Hydrogen and New Energy
• /
• v.8 no.4
• /
• pp.181-185
• /
• 1997

The electrochemical properties of the $AB_2$-type (Zr-Ti-V-Ni-Cr-Co-Mn) metal hydride electrodes prepared by ball milling with $AB_5-type\{(LM)Ni_{3.6}Al_{0.4}Co_{0.7}Mn_{0.3}\}$(LM : Lanthanum-rich mischmetal) alloy powder as a surface activator were investigated. By ball milling with $AB_5$ type alloy powder, the activation of $AB_2$ type metal hydride electrode was accelerated resulting in an increase of discharge capacity from 35% to 85% of the maximum capacity at the first cycle. As the amount of surface activator increased the activation rate increased, whereas the discharge capacity increased with 10wt% and decreased with 20wt% addition of the surface activator. When the amount of the surface activator was kept constant as 10wt%, the discharge capacity and the activation rate increased with ball milling time up to 20 hours. However beyond 20 hours of ball milling time, they decreased drastically due to the nano-crystallization or amorphorzation of the alloy powder.

• Journal of Hydrogen and New Energy
• /
• v.11 no.4
• /
• pp.189-202
• /
• 2000

$AB_2$ type Zr-based Laves phases alloys have been studied for potential application as a negative electrode in a Ni-MH battery. The $AB_2$-type electrodes have a much higher energy density than $AB_5$-type electrodes per weight, however they have some disadvantages such as poor activation behavior and cycle life etc. Nonetheless, the $AB_2$-type electrodes have been studied very extensively due to their high energy density. In this study, in order to develop the cycle life, the Mn of $AB_2$ alloy composition was substituted partially by Mo. The alloys were melted by arc furnace and remelted 4-5 times for homogeneity. The alloy powder was used below 200-325 mesh for experiments. The structures and phases of the alloys were analyzed by XRD, SEM and EDS, and measured the curve of a pressure-composition isotherms. The electrodes were prepared by cold pressing of the copper-coated(25 wt%) alloy powders, and tested by a half cell. The results are summarized as follows. The cycle life was improved with the increase of Mo amount in $Zr_{1-x}Ti_xV_{0.4}Ni_{1.2}Mn_{0.4}Mo_y$(x=0.3, 0.4) and the activation was faster, whereas the discharge capacity decreased.

• Journal of Surface Science and Engineering
• /
• v.30 no.4
• /
• pp.262-271
• /
• 1997

Nickel-matal hydride(Ni-MH) batteries are receiving attention as non-pollunting. high performance rehargeable energy stoage system. The performance of Ni-Mh is significantly influenced by the hydrogen storage alloy materiels used as an anode material. Recently, having discharge capacities higher than the $AB_5$-type hydrogen storage alloys, the Zr-based $AB_2$-Type hydrogen storage alloys has remaining problems regarding cycle life and self-dischareg. These problems need to be solved by improvements in the alloy design and/or surface treatment. This work investiggates the effects the effects of surface property by fluorination on $Zr_{0.7}Ti_{0.3}V_{0.4}Mn_{0.4}Ni{1.2}$ composittion $AB_2$-Type hydrogen storage alloys. EPMA, SEM and AES techniques were used for surface analysis, and the crystal structure was characterized by constant current cycling test and potential sweep methods. Fluorination was found to be effective when La-was incorporated into the alloy, and has unique morphology, higher reactivity, and at the same time formed a protective film. Through, fluorination, the cycle life of an electrode was found to increase significantly, charge/discharge characteristics of the electrode the potential difference between the charge/discharge plateau, i.e polarization(overpotential)were improved.

• Biomedical Science Letters
• /
• v.5 no.1
• /
• pp.27-40
• /
• 1999

This study was focused on the evaluation of MarB alongside with MarA for its regulatory effects upon the efflux function of AcrAB pump, which were induced or not, perhaps as a target. Transductions of marR and/or acrAB mutation which were derived from Mar and/or AcrAB mutants of wild type E. coli K-12, respectively, into the multicopy plasmid in wild type E. coli backgrounds or into the chromosome of isogenic parents were done. Minimal inhibitory concentration (MIC) of transduced mutants was compared with their original mutants. This study reports the indirect evidences that suggests a model in which MarB along with MarA have a putative negative regulatory effect upon the efflux function of AcrAB/TolC pump while MarA alone have a positive regulatory effect to the expression of acrRAB operon at transcription level. The target of MarB with MarA for its putative negative regulator might be the AcrAB efflux pump. Another efflux system (s) might be negatively regulated by MarB with MarA, and be involved in the efflux of antibiotics which were otherwise extruded preferentially by AcrAB efflux pump.

• Korean Journal of Animal Reproduction
• /
• v.16 no.4
• /
• pp.325-333
• /
• 1993

A competitive type immunoassay method for 17$\beta$-estradiol(E2) based on the idiotypic anti-idiotypic antibody and time-resolved fluorescence is described. The anti-idiotypic antibody(Ab2) produced to E2 binding site of the primary idiotype antibody (Ab1) was labelled with europium and was allowed to compete with E2 standards or serum sample for the binding sites of Ab1 which was bound to 2nd antibody captured ontothe surface of microtitre plates. Fluorescence measured by time-resolved fluorometer was inversely proportional to the concentration of E2 over the range 5~500pg/well. The sensitivity of the assay was 5pg per well which was compatible with that ofradioimmunoassay using the same Ab1 and 3H-E2 as a tracer. One great advantage of this method described here was to enable antibodies to be labelled instead of haptens, and thus makes it easier to develop sensitive and robust immunoassay systems specially for haptens.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.501-507
• /
• 2010

The aim of the current study was to analyze the diversity of the major surface protein (Msp) gene in Theileria buffeli, which is known as the major antigenic protein recognized by the immune system of the host. In addition, we characterized the diversification of the Msp gene and its relationship to with the pathogenicity of Theileria. Complete blood counts (CBC) and Theileria 18S rRNA PCR sequence analysis were performed for 177 Korean indigenous cattle (KIC) in Jeju Island. A total of 28 KIC (16 anemic and 12 non-anemic KIC) were then randomly selected based on 18s rRNA PCR positive samples for sequence analysis of the Theileria Msp gene, which was performed twice for each specimen. The resulting 56 Msp gene sequences were classified into five antigenicity types (type I to V), according to the variable region (517-571 bp), which exhibited high similarity (${\geq}$ 98.9%) to several available GenBank sequences (Theileria spp. from China-EU584237; T. sergenti from China-DQ078264; Theileria spp. from Thailand-AB081329; Theileria spp. from Japan-AB218442; T. sergenti from Japan-AB016280). The 56 Msp sequences consisted of 22, 15, 9, 8, and 2 cases of type I to type V Msp genes, respectively. The most prevalent type in both anemic and non-anemic KIC was type I (37.5% in anemic and 41.7% in non-anemic). Among the remaining types, type II was the most prevalent (37.5%) in anemic KIC, while type IV was the most prevalent (25%) in non-anemic KIC. The results of our study help confirm the diversity of Msp gene types and demonstrate that the gene type distribution of Msp genes varies among Theileria-infected KIC in Jeju Island.

• Journal of the Korean Ceramic Society
• /
• v.45 no.5
• /
• pp.290-296
• /
• 2008

$AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structures which have been reported as proton conductors over $600^{\circ}C$ were studied. The $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure is known to be more easily synthesized and has better stability than normal $ABO_3$ perovskite structure. And it is stable at about $800^{\circ}C$ in the $CO_2$ atmosphere, whereas the $BaCeO_3$ perovskite is easily decomposed into carbonate. In addition, this $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure could simply produce oxygen vacancies within their structure not by introducing additional doping oxides but by just controling the molar ratio of $B'^{+3}$ and $B"^{+5}$ metal ions in the B site. Hence it is easy to design the structure which shows highly sensitive electrical conductivity to humidity. In this study, the single phase boundary of $BaR_{0.5+x}Ta_{0.5-x}O_{3-{\delta}}$(R = rare earth) complex perovskite structures and it's phase stability were investigated with changes in composition, x. And the humidity dependance of electrical conductivity at different $P_{H2O}$ conditions was investigated.