• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.25-33
• /
• 2020

To investigate the relationship between strain distribution and tensile properties of brittle material, five types of tensile coupon of carbon fiber reinforced polymer (CFRP) modified the tab portion in order to have a strain distribution including S0, SD1, SD2, SV1, SV2 were tested. The ultimate stress and strain of SD2 and SV2 which was intended to have larger strain distribution were smaller than those of SD1 and SV1, that was more clearly shown in the test results of the symmetric coupons (SV series) than the asymmetric coupons (SD series). In addition, the ultimate stress and strain of most coupons with strain distribution in this study were decreased when compared to the control group with uniform strain. These results were analyzed in various ways through 1) the average of the strain values directly measured by the strain gages, 2) the converted strain calculated by dividing the total deformation by the effective length, and 3) the ultimate effective strain derived from both the elastic modulus and the ultimate load. The values measured by strain gage indicates response of the local region precisely, but it does not represent the response from whole section. However, the converted strain and effective strain can supplement disadvantage of gage because they represent the average response of whole section. In particular, the effective strain can provide rupture strain conservatively, which can be utilized in practice, when the value obtained by strain gage was not effective due to gage damage or abnormal gage readings near ultimate load. This value provides a value that can be used even when partial rupture has occurred and is reasonably useful for specimens with strain distribution.

• Applied Biological Chemistry
• /
• v.16 no.2
• /
• pp.85-93
• /
• 1973

These experiments were carried out to study influences of the kind of yeasts and of brewing condition on fermentation of Takjoo mash. The results obtained were as follows: 1. Kind of yeasts and the number of yeasts in mash. When the first stage mash was fermented at $20^{\circ}C$ for $1.5{\sim}2.5$ days and at $25^{\circ}C$, $30^{\circ}C$ for $1{\sim}2days$, in the second stage mash that was fermented at high temperature, the number of yeasts was less as compared with the case of fermentation at low temperature, but the living yeasts number of Takjoo yeast strain Dm-1 was more than those of sake yeast, strain No. 7. 2. Kind of yeasts and composition of ripened mash. 1) In the secondstage mash that was fermented at high temperature($30{\sim}35^{\circ}C$), alcohol percentage of ripened mash using the selected Takjoo yeasts (strains: Dm-1, Y-1) was remarkably higher than the case of another yeasts (strains: No.7, No.6, No. 396, No. 1). 2) Acidity of mash had a little differences between strain Dm-1 and strain No. 7. 3) In the second stage mash that was fermented at high temperature ($30{\sim}35^{\circ}C$), the amount of Formol-N using strain Dm-1 was remarkably less than strain No.7. 3. Brewing condition and alcohol percentage of mash. 1) The fit amount of wheat bran Kuk addition per material was 3 percentage and it was adequate to use the mixture of wheat flour Kuk 20 percentage and wheat bran Kuk 1-2 percentage. 2) Though brewing concentration of the first stage mash was duiluted by twice of general brewing concentration, the yeast reproduction was normal. 3) In addition of wheat flour $80{\sim}140g$ per 180ml water, alcohol percentage of the mash increased almost propotionally according to the increase of the amount of wheat flour. 4) It was recognized that three stage brewing was superior in method to two stage brewing at present.

• Mycobiology
• /
• v.42 no.1
• /
• pp.46-51
• /
• 2014

A degenerated strain of Pleurotus eryngii KNR2312 was isolated from a commercial farm. Random amplified polymorphic DNA analysis performed on the genomic DNA of the normal and degenerated strains of this species revealed differences in the DNA banding pattern. A unique DNA fragment (1.7 kbp), which appeared only in the degenerated strain, was isolated and sequenced. Comparing this sequence with the KNR2312 genomic sequence showed that the sequence of the degenerated strain comprised three DNA regions that originated from nine distinct scaffolds of the genomic sequence, suggesting that chromosome-level changes had occurred in the degenerated strain. Using the unique sequence, three sets of PCR primers were designed that targeted the full length, the 5' half, and the 3' half of the DNA. The primer sets P2-1 and P2-2 yielded 1.76 and 0.97 kbp PCR products, respectively, only in the case of the degenerated strain, whereas P2-3 generated a 0.8 kbp product in both the normal and the degenerated strains because its target region was intact in the normal strain as well. In the case of the P2-1 and P2-2 sets, the priming regions of the forward and reverse primers were located at distinct genomic scaffolds in the normal strain. These two primer sets specifically detected the degenerate strain of KNR2312 isolated from various mushrooms including 10 different strains of P. eryngii, four strains of P. ostreatus, and 11 other wild mushrooms.

• Interaction and multiscale mechanics
• /
• v.1 no.3
• /
• pp.317-328
• /
• 2008

When carbon-filled rubber specimens are subjected to cyclic loading, they do not return to their initial state after loading and subsequent unloading, but exhibit a residual strain or permanent deformation. We propose a specific form of the pseudo-elastic energy function to represent cyclic loading for incompressible, isotropic materials with stress softening and residual strain. The essence of the pseudo-elasticity theory is that material behaviour in the primary loading path is described by a common elastic strain energy function, and in unloading, reloading or secondary unloading paths by a different strain energy function. The switch between strain energy functions is controlled by the incorporation of a damage variable into the strain energy function. An extra term is added to describe the permanent deformation. The finite element implementation of the proposed model is presented in this paper. All parameters in the proposed model and elastic law can be easily estimated based on experimental data. The numerical analyses show that the results are in good agreement with experimental data.

• Journal of Microbiology
• /
• v.42 no.3
• /
• pp.188-193
• /
• 2004

Xanthobacter flavus strain UE15 was isolated in wastewater obtained from the Ulsan industrial complex, Korea. This strain functions as a 1,2-dichloroethane (1,2-DCA) degrader, via a mechanism of hydrolytic dechlorination, under aerobic conditions. The UE15 strain was also capable of dechlorinating other chloroaliphatics such as 2-chloroacetic acid and 2-chloropropionic acid. The dhlA gene encoding 1,2-DCA dechlorinase was cloned from the genomic DNA of the UE15 strain, and its nucleotide sequence was determined to consist of 933 base pairs. The deduced amino acid sequence of the DhlA dechlorinase exhibited 100％ homology with the corresponding enzyme from X. autotrophicus GJ10, but only 27 to 29％ homology with the corresponding enzymes from Rhodococcus rhodochrous, Pseudomonas pavonaceae, and Mycobacterium sp. strain GP1, which all dechlorinate haloalkane compounds. The UE15 strain has an ORF1 (1,356 bp) downstream from the dhlA gene. The OFR1 shows 99％ amino acid sequence homology with the transposase reported from X. autotrophicus GJ10. The transposase gene was not found in the vicinity of the dhlA in the GJ10 strain, but rather beside the dhlB gene coding for haloacid dechlorinase. The dhlA and dhlB genes were confirmed to be located at separate chromosomal loci in the Xanthobacter flavus UE15 strain as well as in X. autotrophicus GJ10. The dhlA and transposase the UE15 strain were found to be parenthesized by a pair of insertion sequences, 181247, which were also found on both sides of the transposase gene in the GJ10 strain. This unique structure of the dhlA gene organization in X. flavus strain UE15 suggested that the dechlorinase gene, dhlA, is transferred with the help of the transposase gene.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.80-89
• /
• 1998

The measuring method of structural strain by a 3*3 passive-demodulated fiber optic interferometric sensor was developed to implement the real-time monitoring of structural status. A 3*3 fiber optic Michelson interferometric sensor was constructed to sense the value and the direction of structural strain. This sensor was applied on the cantilevered aluminum beam to experiment the sensing of the structural deformation. The digital signal processing was programmed by LabVIEW to determine the structural strain from the fiber optic signals. This program was verified by various simulated fiber optic signals. Finally, the structural was well determined by this developed program from real fiber optic signals.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.167-174
• /
• 2003

Fatigue damage of 2.2Ni-1Cr-0.5Mo steel used fir high strength pressure tubes and vessels was evaluated using uniaxial specimens subjected to strain-controlled fatigue loading. Based on the fatigue test results from different strain ratios of -2. -i 0, 0.5, 0.75, the fatigue damage of the steel was represented by using a cyclic strain energy density. Mean stress relaxation depended on the magnitude of the applied strain amplitude. The high pressure vessel steel exhibited the cyclic softening behavior. Total strain energy density consisting of the plastic strain energy density and the elastic tensile strain energy density described fairly well the fatigue life of the steel, taking the mean stress effects into account. Compared to other fatigue damage parameters, fatigue life prediction by the cyclic strain energy density showed a good correlation with the experimental fatigue lift within a factor of 3.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.18-29
• /
• 2008

The purpose of this study was to compare the polymerization shrinkage of several filling methods using strain gauges. In this study, a light-emitting diode(LED) curing unit(Elipar Freeligh2, 3M EPSE, USA) and plasma arc lamp(PAL) curing unit(Flipo, LOKKI, France) were used for curing, Filtek $Z350^{TM}$(3M EPSE, USA) composite resin was used for the cavity filling. Sixty permanent bicuspid teeth, that were extracted for orthodontic treatment, were studied. The cavities were prepared on the occlusal surface and were filled using the following methods : 1) bulk filling, 2) parallel filling, 3) oblique filling The strain was recorded on the buccal, lingual, mesial and distal surfaces and the strain values were computed into stress values. The shear bond strength of each filling method was tested using a Micro Universal Testing machine. The results can be summarized as follows: 1. In the strain changes, all LED and PAL curing groups showed an increase on the buccal surface and a slow decrease as time elapsed. 2. In the strain changes of the mesial and distal surfaces, the decreases and increases were shown repeatedly and reduced as time elapsed. 3. There were no significant statistical strain changes among filling methods in the LED or PAL curing groups. 4. There were significant statistical strain changes between the LED and PAL curing groups on the buccal surface(p<0.05). 5. From the shear bond strength results, in the LED curing group, filling method 3 showed lower surface stress than filling method 1 and 2(p<0.05). In the PAL curing group, there were no significant statistical strain changes between each filling method. 6. The surface stress of each group was lower than the shear bond strength.

• KSBB Journal
• /
• v.17 no.3
• /
• pp.247-254
• /
• 2002

Two kinds of crude oil-degrading microorganisms from soil and one kind from sea were isolated and named strain Al32, strain F722 and strain OM1, respectively. These microorganism were identified Acinetobacter sp., Pseudomonas aeruginosa and Acinetobacter calcoaceticus, respectively. The optimum cultivation temperature of Acinetobacter sp. A132 and P. aeruginosa F722 was $35^{\circ}C$ and optimum growth pH was 8 and 9, respectively. The growth was the highest at 2.0% (w/v) substrate concentration when crude oil was only carbon source. The growth of A. calcoaceticus OM1 isolated from sea was the highest at 3.0% (w/v) of crude oil. In inspection of crude oil degradability, strain Al32 showed 5.49 g/L.day with Eleuthera (OMAN), 2.0% (w/v). P. aeruginosa F722 showed 1.19 g/L g/L.day with L-Zakum (AFRICA). In case of kerosene $nC_9\simnC_{20}$ and diesel $nC_9\simnC_{28}$, A. calcoaceticus OM1 was degraded 95% and 75%, respectively, for 7 days culture, and P. aeruginosa F722 was 80% after 10 days.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.259-268
• /
• 2005

In order to analyze the sheet drawability, the measurement of the plastic strain ratio was carried out for the 5182 aluminum alloy sheets in which were cold rolled without lubrication and subsequent recrystallization annealing. The average plastic strain ratio of the 5182 aluminum sheets was 1.50. It was considered that the higher plastic strain ratio was resulted from the ND//<111> component evolved during rolling and maintained during annealing. The AA5182/polypropylene/AA5182 (AA/PP/AA) sandwich sheets of the 5182 aluminum alloy skin sheet and the polypropylene core sheet with high formability have been developed for application for automotive body panels in future light weight vehicles with significant weight reduction. The AA/PP/AA sandwich sheets were fabricated by the adhesion of the core sheet and the upper and lower skin sheets. The AA/PP/AA sandwich sheet had high plastic strain ratio (1.58), however, the planar anisotropy of the sandwich sheet was little changed after fabrication. The optimum combination of directionality of the upper and lower skin sheets having high plastic strain ratio and low planar anisotropy was calculated theoretically and an advanced process for producing the sandwich sheets with high plastic strain ratio was proposed. The developed sandwich sheets have a high average plastic strain ratio of 1.55 and a low planar anisotropy of 0.17, which was improved more by 3.2 times than that of 5182 aluminum single sheet.