• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.131-150
• /
• 1991

The Weolseong diatreme was temporally and spatially related to the intrusion of the Gadaeri granite, and was -mineralized by meteoric aqueous fluids. In the Nokdong As-Zn deposit, pyrite, aresenopyrite and sphalerite are the most abundant sulfide minerals. They are associated with minor amount of magnetite, pyrrhotite, chalcopyrite and cassiterite, and trace amounts of Pb-Sb-Bi-Ag sulphosalts. The AsZn ore probably occurred at about $350^{\circ}C$ according to fluid inclusion and compositional data estimated from the arsenic content of arsenopyrite and iron content of sphalerite intergrown with pyrrhotite + chalcopyrite + cubanite. Heating studies of fluid inclusions in quartz indicate a temperature range between 180 and $360^{\circ}C$, and freezing data indicate a salinity range from 0.8 to 4.1 eq.wt % NaCl. The coexisting assemblage pyrite + pyrrhotite + arsenopyrite suggests that $H_2S$ was the dominate reduced sulfur species, and defines fluid parameter thus: $10^{-34.5}$ < ${\alpha}_{S_2}$ < $10^{-33}$, $10^{-11}$ < $f_{S_2}$ < $10^{-8}$, -2.4 < ${\alpha}_{S_2}$ < -1.6 atm and pH= 5.2 (sericte stable) at $300^{\circ}C$. The sulfur isotope values ranged from 1.8 to 5.5% and indicate that the sulfur in the sulfides is of magmatic in origin. The carbon isotope values range from -7.8 to -11.6%, and the oxygen isotope values from the carbonates in mineralized wall rock range from 2 to 11.4%. The oxygen isotope compositions of water coexisting with calcite require an input of meteoric water. The geochemical data indicate that the ore-forming fluid probably was generated by a variety of mechanisms, including deep circulation of meteoric water driven by magmatic heat, with possible input of magniatic water and ore component.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.360-366
• /
• 2010

Doenjang (fermented soybean paste) is one of the korean traditional fermented soybean product which is consumed with cooked rice as a soup or paste. During the fermentation, soybean protein hydrolyzed into amino acids and various peptide, and various organic acids by mirobes related and enzymes produced by meju fermentation. Some commercial products locationally samples give more sour taste than normal due to abnormal fermentation which the reasons are not clear. Three samples that gave sour taste organoleptically were collected and analyzed their characteristics such as pH, moisture content, acidity and microbial counts. The pH of the sour sample were lower than the normal with higher acidity as pH 5.39 (normal) to pH 4.36 (S2) and 15.80 ml of(0.lN NaOH consumed) to 21.80 ml (S1) respectively. Salt and moisture contents were different with sour and normal Doenjang as 16.38% (normal) to 8.92% (S3) in salt and 55.94% (normal) to 49.34% (S1) in moisture content. Total viable counts were $4.1{\times}10^8$ (normal) to $8.0{\times}10^5$ (S2), and $3.4{\times}10^8$ (normal) to $8.0{\times}10^5$ (S2) in acid producing microbes at BCP plate. Yeast and mold were not detected. The composition of acids as mainly lactic acid and acetic acid of sour Doenjang. Total free amino acids content were lower the sour Doenjang than the normal.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2004

Cordyceps pruinosa grows upon dead pupae of Lepidoptera and produces one or $3{\sim}4$ club-shaped stromata per host. The stromata have distinct club-shaped head and long stalk. The length of stromata varies from $1{\sim}3\;cm$. Apical head consists of densely crowded semi-immersed perithecia, which are $360{\sim}400\;{\times}\;180{\sim}200\;{\mu}m$ in size. Asci are $150\;{\mu}m$ in length and $2.8{\sim}3\;{\mu}m$ in diameter. Ascospores, which are $124{\sim}141\;{\mu}m$ in length, have thin thread-like structures in the middle with part-spores attached on both sides. Each ascospore does not separate into part-spores after dispersal, but each part-spore germinates and together develops a colony. The imperfect form produces phialides of $15{\sim}24\;{\times}\;2{\sim}3\;{\mu}m$ size, with spherical or spindle shaped conidia of $4{\sim}6\;{\times}\;1.8{\sim}2.4\;{\mu}m$ size, The anamorph was identified as Mariannaea elegans Samson. YMA and SDAY agar media with pH 7 was produced abundant mycelial growth with high density. Best mycelial growth was observed when dextrin was used as a carbon source. Lactose, saccharose and sucrose also produced high mycelial growth. Peptone, yeast extract and tryptone produced abundant mycelial growth, when used as nitrogen sources. Highest mycelial growth and density was observed when C/N ratio was 1 : 1 at the concentration of 12.5 g/l each. $KH_2PO_4$ was the best mineral source for mycelial growth. Highest mycelial dry wt. was produced in YM and SDAY broths. Optimum inoculum for 100 ml of liquid broth was 6 mycelial discs. Similarly, optimum liquid culture period was 7 days.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.61-69
• /
• 2009

Statement of problem: Porcelain veneers have become a popular treatment modality for aesthetic anterior prosthesis. Fitting porcelain veneers in the mouth usually involve a try-in appointment, which frequently results in salivary contamination of fitting surfaces. Purpose: An in vitro study was carried out to investigate the effect of silane treatment timing and saliva contamination on the resin bond strength to porcelain veneer surface. Material and methods: Cylindrical test specimens (n=360) and rectangular test specimens (n=5) were prepared for shear bond test and contact angle analysis. Whole cylindrical specimens divided into 20 groups, each of which received a different surface treatment and/or storage condition. The composite resin cement stubs were light-polymerized onto porcelain adherends. The shear bond strengths of cemented stubs were measured after dry storage and thermocycling (3,000 cycles) between 5 and $55^{\circ}C$. The silane and their reactions were chemically monitored by using Fourier Transform Infrared Spectroscopy analysis (FTIR) and contact angle analysis. One-way analysis of variance (ANOVA) and Dunnett's multiple comparison were used to analyze the data. Results: FT-IR analysis showed that salivary contamination and silane treatment timing did not affect the surface interactions of silane. Observed water contact angles were lower on the saliva contaminated porcelain surface and the addition of 37% phosphoric acid for 20 seconds on saliva contaminated porcelain increased the degree of contact angle. Silane applied to the porcelain, a few days before cementation, resulted in increasing the bond strength after thermocycling. Conclusion: Within the limitation of this study, it can be concluded that it would be better to protect porcelain prosthesis before saliva contamination with silane treatment and to clean the contaminated surface by use of phosphoric acid.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.269-281
• /
• 2008

Fatigue or overload can result in mechanical problems of implant components. The mechanical strength in the implant system is dependent on several factors, such as screw and fixture diameters, material, and design of the fixture-abutment connection and abutment. In these factors, the last rules the strength and stability of the fixture-abutment assembly. There have been some previous reports on the mechanical strength of the fixture-abutment assembly with the compressive bending test or short-term cyclic loading test. However, it is restrictive to predict the long-term stability of the implant system with them. The purpose of this study was to evaluate the influence of the design of the fixture-abutment connection and abutment on the mechanical strength and failure mode by conducting the endurance limit test as well as the compressive bending strength test. Tests were performed according to a specified test(ISO/FDIS 14801) in 4 fixture-abutment assemblies of the Osstem implant system: an external butt joint with Cemented abutment (group BJT), an external butt joint with Safe abutment (group BJS), an internal conical joint with Solid abutment (group CJO), and an internal conical joint with ComOcta abutment (group CJT). The following conclusions were drawn within the limitation of this study. Compressive bending strengths were decreased in order of group BJS(1392.0N), group CJO(1261.8N), group BJT(1153.2N), and group CJT(1110.2N). There were no significant differences in compressive bending strengths between group BJT and group CJT(P>.05). Endurance limits were decreased in order of group CJO(600N), group CJT(453N), group BJS(360N), and group BJT(300N). 3. Compressive bending strengths were influenced by the connection and abutment design of the implant system, however endurance limits were affected more considerably by the connection design.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.720-728
• /
• 2001

Cercaria yamagutii Ito, 1957 (C. yamagutii) was found in Lunatia fortuni (L. fortuni) and Neverita didyma (N. didyma) collected from the tideland of Sim-po located at the estuary of the Mankyong River, Chonbuk. It was finally confirmed that the parasite is Acanthoparyphium tyosenense Yamaguti, 1939 (A. tyosenense) and its life history was clarified in this study. Mactra veneriformis (M. veneriformis) was artificially infected with C. yamagutii isolated from L. fortuni and N. didyma. It began to intrude into M. veneriformis through the inhalent canal. Five hours after infection, the tails of the cercaria began to be separated from the main body and the cercaria started to form cysts. Mature cysts were formed 340 hours (14 days) after infection. The cysts were $300\sim360{\mu}m$ in diameter and the encysted metacercarias were $790\sim800\times300\sim310{\mu}m$ in size. The metacercarias were administered orally to Larus crassiostris (L. crassiostris), and adult worms of $84.5\sim112.5\times55\sim65{\mu}m$ were found full of eggs with $2.20\~3.70$ mm long and $0.40\~0.59$ mm wide after 10 days. In a field study, it was observed that the infection rate of A. tyosenense is $99.5\%$ in M. venerifomis, $76.3\%$ Solen strictus (S. strictus), and $37\%$ Ruditapes philippinarum (R. philippinarum), No difference was found among different host sizes, It was concluded that the first intermediate hosts of A. tyosenense Yamaguti were L. fortuni, N. didyma, Tympanotonus microptera, Cerithidea (Cerithidea) largillierti, Cerithidea (Cerideopsilloa) cingulata, the second intermediate hosts M. venerifomis, S. strictus and R. philippinamn, and the final hosts L. crassiostris and Melanitta fusca stejnegeri.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.3
• /
• pp.111-120
• /
• 2012

This study regards a series of achievement on Wonlim(Garden) Cultural Properties Excavation Project, led by field of landscape architecture. It will mainly describe excavation results of Gwiam(龜巖: Turtle rock) and historical value of it in terms of Nakseojae(樂書齋) restoration in Bogil-do Yun,Seondo Wonlim(Scenic Sites, No.34). Gwiam(Turtle rock) was found 14.6m apart from the north of Nakseojae, and it covered with 10~15m topsoil tilted toward Nakseojae, The size of Gwiam, which was Granite, was 360cm length, 270cm width, 95cm high. The Edge of Gwiam's North west part was of triangular shape forming Turtle head. The back of the Turtle head was form of Tortoise-shell because of wide backboard with both side groove. The southeast part of Gwiam projected was Turtle's tail. This Granite was obvious Turtle shape artificially made, and there are less likely to relocate from place to place. This Turtle-shaped Gwiam is important landmark for Nakseojae, which is one of the four spiritual creatures written in Bogildoji(甫吉島識) and Gosanyugo(孤山遺稿) by Yunwi. According to Bogildoji, it is estimated that Gwiam were on the axis with Soeunbyung(小隱屛), Nakseojae and was buried when Yiguan(Gosan's grandson) reconstructed a building. Also, it was place for enjoying the moon. But, Even after three times excavation in Nakseojae, there was no way to identify further information regarding Gwiam, so it was a matter of mystification. As a result of this study, Gwiam is laid bare to light in at least 260 years, so it is good example for boosting importance of landscape architecture field and restoring Nakseojae. Furthermore, firm base-soil was discovered in 135m high Rock Mass below, so natural ground of Nakseojae can be estimated by this basis. To be conclusion, Preservation Process for Gwiam and Estimation Space through interpretation of four spiritual creatures(四靈) in Gosan's Poetry should be continue.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.94-104
• /
• 2018

This study examined photogrammetric reconstruction techniques that can measure the original form of a cultural property utilizing photographs taken in the past. During the research process, photographs taken in the past as well as photograph on the internet of Soswaewon Garden in Damyang(scenic site 40) were collected and utilized. The landscaping structures of Maedae, Aiyangdan, Ogokmun Wall, and Yakjak and natural scenery Gwangseok, of which photographs can be taken from any 360 degree direction from a close distance or a far distance without any barriers in the way, were selected and tested for the possibility of reproducing three-dimensional shapes. The photography method of 151 landscape photographs (58.6%) from internet portal sites for the aforementioned five landscape subjects containing information on the date the photograph was taken, focal length, and exposure were analyzed. As a result of the analysis, it was revealed that the majority of the photographs tend to focus on important parts of each subject. In addition, we discovered that there are two or three photography methods that internet users preferred in regards to each landscape subject. For the purposes of the experiment, photographs in which a single scene consistently appears for each landscape subject and it was determined that there was a high level of preference related to the photography method were analyzed, and three-dimensional mesh shape model was produced with a photoscan program to analyze the reproducibility of three-dimensional shapes. Based on the results of the reproduction, it was relatively possible to reproduce three-dimensional shapes for artifacts such as Ogukmun wall, Maedae, and Aeyangdan, but it was impossible to reproduce three-dimensional images for natural scenery or an object that has similar texture such as Yakjak and Gwangseok. As a result of experimentation related to the reconstruction of three-dimensional shapes with the photographs taken on site using a photography method similar to that of the photographs selected as previously mentioned, there was success related to reproducing the three-dimensional shapes of Yakjak and Gwangseok, of which it was not possible to do so through the photographs that had been collected previously. In addition, through comparison of past and present images, it was possible to measure the exact sizes as well as discover any changes that have taken place. If past photographs taken by tourists or landscape architects of cultural properties can be obtained, the three-dimensional shapes from a particular period of time can be reproduced. If this technology becomes widespread, it will increase the level of accuracy and reliability in regards to measuring the past shapes of cultural landscape properties and examining any changes to the properties.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.351-360
• /
• 2002

The Korean fresh pork loins in vacuum packaged were obtained from three different Korean export companies and investigated for microbiological and sensory properties. The fresh pork loins were stored at 2$^{\circ}C$ for 50 days and analyzed with an interval of 5$\sim$10 days. The results were as follows: The overall numbers of total plate counts and coliform bacteria were higher in swab method than in meat sampling method. The total plate counts in the loins from the company I were maintained low levels ($\prec$10$^5$ cfu/$cm^2$ or $\prec$10$^5$ cfu/g) for entire storage periods(50 days at 2$^{\circ}C$), whereas the loins from the company III had high levels when they were compared to the domestic standard for the allowance limit. The samples from the company III showed that total plate counts were over 106 after about 30 days when determined by meat sampling method and total plate counts were over 106 after 15 days when determined by swab method. The overall numbers of coliform bacteria were also significantly lowest in the samples from the company I, whereas they were highest in the company III. Therefore, all meat companies will have to make an effort to prevent bacterial contamination in each stage such as slaughtering, marketing and consumer in order to ensure the production of safe meat and the extension of shelf-life. For fresh products, scores of intramuscular fat were higher in samples form the companies II and III than those from the company I when visibly evaluated with the standard. There were no significant differences in scores of meat color, drip and fresh meat flavor. However, the samples from the company I had the lowest score of off-flavor and highest score of overall acceptability. For cooked products, there were no significant differences in meat flavor, off-flavor, juiciness and overall acceptability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.351-360
• /
• 2000

The purpose of this study was to evaluate the microleakage of class V compomers according to acid etching treatment and treatment times. Extracted 180 sound human molar teeth were selected then prepared physiologic pulpal pressure far this experiment. In this study class V cavities were prepared on buccal surface with gingival margin located in 1mm superior to CEJ under simulate physiological conditions. These specimens were randomly divided into 6 groups of 30 each and restored following methods : A: Dyract AP + Prime&Bond 2.1 Group 1 : No acid etching, according to manufacturer's instruction. Group 2 : 15 seconds acid etching and same method with Group 1. Group 3 : 30 seconds acid etching and same method with Group 1. B: F2000 groups + Single Bond adhesive Group 1 : No acid etching, according to manufacturer's instruction. Group 2 : 15 seconds acid etching and same method with Group 1 Group 3 : 30 seconds acid etching and same method with Group 1. After 500 thermocycling between $5^{\circ}C\;and\;55^{\circ}C$, the specimens were sealed with glass ionomer and nail varnish then placed in 5% methylene blue dye for 5 hours and rinsed with tab water. The specimens were embedded in orthodontic clear resin, then sectioned buccolingually through the center of restoration with a low speed diamond saw. The dye penetration on each of the specimens were then observed with a stereomicroscope at $\times20$ magnification. The results of this study were statistically analyzed using the indepedent sample t-test and analysis of variance. Results were as follows, 1. In occlusal walls, microleakage were significantly reduced in acid etched group restored with Dyract AP but no statistically significance in F2000 groups. 2. In gingival walls, microleakage were significantly reduced in group 2 restored with Dyract AP, and group 2 and group 3 in F2000 groups. 3. All groups, except group 3 in Dyract AP, showed significantly less microleakage in occlusal wall than gingival wall. 4. No statistical significance were showed between group 2 and group 3 in both materials.