• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.655-664
• /
• 2002

In this paper, we implemented a web-based 3D virtual pottery gallery Using VR authoring tools. With this system, we expect to cause learning motives and Provide more realistic and interactive learning space. Out system was implemented by making panorama images and 3D object modules using Photo Vista. Object Modeler and Reality Studio. Users can connect to this web site(http://artstory.x-y.net), rotate a pottery panoramically, and zoom it in or out. We designed this virtual gallery can have beneficial influence on students' aesthetic aspects through realistic work appreciations in their art education processes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.4
• /
• pp.484-492
• /
• 2015

This paper proposes a PWM phase-shift circuit to make that the LED lighting system distributes the channel currents evenly for any number of LED strings by generating evenly phase-shifted PWM signals for multiple LED driver ICs. The evenly distributed channel currents reduce the peak current, the decoupling capacitor size, and EMI noise. The PWM phase-shift circuit makes an arbitrary degree of PWM phase-shift by using a resistor and a capacitor. It measures the RC delay once. It reduces the number of external resistors and capacitors by providing zero and 180 degree phase-shift modes requiring no resistor and capacitor. An LED driver IC with the PWM phase-shift circuit was fabricated with a $0.35{\mu}m$ BCDMOS process. The PWM phase-shift circuit receives a PWM signal of 50 Hz~20 kHz at $f_{CLK}=450kHz$ and it generates a $0{\sim}360^{\circ}$ phase-shifted PWM signal with $R=0{\sim}1.1M{\Omega}$ at C=1 nF and $f_{PWM}=1kHz$. The measured phase errors are 1.74~3.94% due to parasitic capacitances.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.175-183
• /
• 2014

In this paper, we present the design and implementation of real-time sound localization based on $0.13{\mu}m$ CMOS process. Time delay of arrival (TDOA) estimation was used to obtain the direction of the sound signal. The sound localization chip consists of four modules: data buffering, short-term energy calculation, cross correlation, and azimuth calculation. Our chip achieved real-time processing speed with full range ($360^{\circ}$) using three microphones. Additionally, we developed a dedicated sound localization circuit (DSLC) system for measuring the accuracy of the sound localization chip. The DSLC system revealed that our chip gave reasonably accurate results in an experiment that was carried out in a noisy and reverberant environment. In addition, the performance of our chip was compared with those of other chip designs.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.301-312
• /
• 2015

Corrosion of zirconium fuel cladding is known to limit the lifetime and reloading cycles of fuel in nuclear reactors. Oxide layers formed on ZIRLO4^{TM}$ cladding samples, after immersion for 300-hour and 50-day in a simulated primary water chemistry condition ($360^{\circ}C$ and 20 MPa), were analyzed by using the scanning transmission electron microscopy (STEM), in-situ transmission electron microscopy (in-situ TEM) with the focused ion beam (FIB) technique, and X-ray diffraction (XRD). Both samples (immersion for 300 hours and 50 days) revealed the presence of the ZrO sub-oxide phase at the metal/oxide interface and columnar grains developed perpendicularly to the metal/oxide interface. Voids and micro-cracks were also detected near the water/oxide interface, while relatively large lateral cracks were found just above the less advanced metal/oxide interface. Equiaxed grains were mainly observed near the water/oxide interface.

• Journal of the Korean earth science society
• /
• v.33 no.5
• /
• pp.434-449
• /
• 2012

The Mesozoic leucocratic granite in the northeastern margin of the Taebaeksan Basin was transformed to protomylonite and mylonite. Mylonitic foliations generally strike to NWWNW and dip to NE with the development of a sinistral strike-slip (top-to-the-northwest) shear sense. Grain-size reduction of feldspar in the mylonitized leucocratic granite occurred due to fracturing, myrmekite formation and neocrystallization of albitic plagioclase along the shear fractures of K-feldspar porphyroclasts. As the deformation proceeded, compositional layering consisting of feldspar-, quartz- and/or muscovite-rich layers developed in the mylonite. In the feldspar-rich layer, fine-grained albitic plagioclase and interstitial K-feldspar were deformed dominantly by granular flow. On the other hand, quartz-rich layers containing core-mantle and quartz ribbons structures were deformed by dislocation creep. Based on calculations from conventional two-feldspar and ternary feldspar geothermometers, mylonitization temperatures of the leucocratic granite range from 360 to $450^{\circ}C$. It thus indicates that the mylonitization has occurred under greenschist-facies conditions. Based on the geochemical features and previous chronological data, the leucocratic granite was emplaced during the Middle Jurassic at volcanic arc setting associated with crustal thickening. And then the mylonitization of the granite occurred during the late Middle to Late Jurassic (150-165 Ma). Therefore, the mylonitization of the Jurassic granitoids in the Taebaeksan Basin was closely related to the development of the Honam shear zone.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1092-1095
• /
• 2004

The $ZnGa_2O_4$ phosphor target is synthesized through solid-state reactions as calcine and sintering temperature in order to deposit $ZnGa_2O_4$ phosphor thin film by rf magnetron sputtering system. The $ZnGa_2O_4$ phosphor thin film is deposited on $Pt/Ti/SiO_2/Si$ substrate and prepared $ZnGa_2O_4$ Phosphor thin film is annealed by rapid thermal processor(RTP) at $750^{\circ}C$, 10 sec. The x-ray diffraction patterns of $ZnGa_2O_4$ phosphor target and thin film show the position of (311) main peak. The cathodolumincsccnce(CL) succtrums of $ZnGa_2O_4$ phosphor target show main peak of 360nm and broad bandwidth of about 180nm.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.853-858
• /
• 2001

The knowledge of flame structure is essential for control of combustion instability phenomena. Some results of an experimental study on mechanism of naturally occurring combustion oscillations with a single dominant frequency are presented. Tests were conducted in a laboratory-scale dump combustor at atmospheric pressure. Sound level meter was used to track the pressure wave inside the combustor. The observed instability was a longitudinal mode with a frequency of $\sim341.8Hz$. Instability map was obtained at the condition of inlet temperature of $360^{\circ}C$, mean velocities of $8.5\sim10.8m/s$ and well premixed mixture. It showed that combustion instability was susceptible to occur in the lean conditions. In this study, unstable flame was observed from stoichiometric to 0.7 in overall equivalence ratio. At selected unstable conditions, phase-resolved OH chemiluminescence images were captured to investigate flame structure with various mean velocities. As mean velocity is increased, the flame grows and global heat release was changed. Due to these effects, combustion instability can be maintained at more lean air-fuel ratio. Also, these results give an insight to the controlling mechanism for an increasing heat release at maximum pressure.

• The Korean Journal of Malacology
• /
• v.15 no.2
• /
• pp.115-119
• /
• 1999

We investigated the processes of egg and larval developments for aquaculture technique development of seedling production fo the flat oyster, Ostrea denselamellosa. Teo flat oyster of larviparous type was different from the pacific oyser (ovivarous type) because their larvae (trochophore and prodissoconch larvae) in the gill released into the seawater. The process of egg development was observed by artificial fertilization at $25^{\circ}C$, using a dissecting method. The sizes of Unfertilized eggs ranged from 80 to 90 $\mu\textrm{m}$ and fertilized eggs with globule-shape was 90-100 $\mu\textrm{m}$. The Polar body appeared after fertilization and egg cleavage began within 1 hour, reaching the blastula stage after 10 hours. The trochophore in the gill appeared 2-3 days after fertilization and grew to the prodissoconch larvae (130 140 $\mu\textrm{m}$) having a complete shell after 1-2 days. The shell of prodissoconch larvae grew to 205 220 $\mu\textrm{m}$ after 10 hours, and then they became umbo stage larvae showing oval in shape. The velum of umbo stage larvae was degenerated about 17-20 days after fertilization and grew into a pediveliger with a developed foot, at this time, the shell length size was 320 360 $\mu\textrm{m}$.

• International journal of advanced smart convergence
• /
• v.7 no.2
• /
• pp.135-142
• /
• 2018

Virtual reality (VR) technology has been increasingly more frequently used day by day in industries, entertainment and performances due to the development of AR and MR technologies. Performance arts also actively utilize $360^{\circ}$ VR technology due to the free expression of stage settings and auditoriums. However, technologies for systems in which performers wear VR devices firsthand rather than being in the sandpoint of bystanders while audiences wear VR head mounted displays(HMDs) to see performance stages have been rarely studied yet. This study investigated the technical possibilities of possible methods of expression that will enable performers to appear on the stage wearing VR devices. Since VR can maximize the sense of immersion with its closed HMD structure unlike augmented reality (AR), VR was judged to be suitable for studies centered on the mental interactions in the inner side of humans. Among them, to implement shamanistic expression methods with the phantoms of the body and soul, a motion capture technology linked with VR display devices and real-time cameras was realized on the stage. In this process, the importance of body ownership experienced by the performers (participants), reactions when they lost it, and the mental phenomena of the desire to possess the subjects of gaze could be seen. In addition, high possibility of development of this technology hereafter could be expected because this technology includes the technical openness that enables the audience to appear on the stage firsthand to become performers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.547-554
• /
• 2013

This paper proposes a novel formation algorithm of identical robots based on object tracking method using omni-directional images obtained through fisheye lenses which are mounted on the robots. Conventional formation methods of multi-robots often use stereo vision system or vision system with reflector instead of general purpose camera which has small angle of view to enlarge view angle of camera. In addition, to make up the lack of image information on the environment, robots share the information on their positions through communication. The proposed system estimates the region of robots using SURF in fisheye images that have $360^{\circ}$ of image information without merging images. The whole system controls formation of robots based on moving directions and velocities of robots which can be obtained by applying Lucas-Kanade Optical Flow Estimation for the estimated region of robots. We confirmed the reliability of the proposed formation control strategy for multi-robots through both simulation and experiment.