• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.1-5
• /
• 2014

We calculated the resonance tunneling energy band in the BCS gap for Type-II superconductor in which periodic potential is generated by external magnetic flux. In this model, penetrating magnetic flux was assumed to be in a fixed lattice state which is not moving by an external force. We observed the existence of two subbands when we used the same parameters as for the $Nd_{1.85}Ce_{0.15}CuO_X$ thin film experiment. The voltages at which the regions of negative differential resistivity (NDR) started after the resonant tunneling ended were in a good agreement with the experimental data in the field region of 1 T - 2.2 T, but not in the high field regions. Discrepancy occurred in the high field region is considered to be caused by that the potential barrier could not be maintained because the current induced by resonant tunneling exceeds the superconducting critical current. In order to have better agreement in the low field region, more concrete designing of the potential rather than a simple square well used in the calculation might be needed. Based on this result, we can predict an occurrence of the electromagnetic radiation of as much difference of energy caused by the 2nd order resonant tunneling in which electrons transit from the 2nd band to the 1st band in the potential wells.

• 한국지반공학회논문집
• /
• 제37권10호
• /
• pp.55-63
• /
• 2021

쉴드TBM의 제작기술 발전과 시공경험 축적으로, 쉴드터널은 전력, 통신 및 상하수도와 같은 소구경 터널에서 도로 및 철도와 같은 대구경 터널로 확대되고 있으며, 그에 따라 병설쉴드터널의 적용도 증가하고 있다. Peck(1969)에 의해 연약지반에서 단선쉴드터널의 지표침하형상이 Gaussian distribution으로 표현될 수 있음이 제시된 이후, 현장계측, 실내모형실험 및 수치해석 등의 방법을 통해 많은 연구에서 이의 적정성이 확인되었다. 본 연구는 현장 계측된 병설쉴드터널의 지표침하로부터 후행 터널(2^nd tunnel)에 의한 추가 지표침하 형상을 표현하기 위해 침하형상의 좌·우측에 Gaussian curve를 각각 적용함으로써, 침하형상을 보다 정확히 표현할 수 있음을 알 수 있었다.

• 화약ㆍ발파
• /
• 제14권3호
• /
• pp.3-9
• /
• 1996

The scope of this cable works was as follows, it was drilled two shafts, NO. 1 shaft (${\phi}6.8m{\times}31m$), NO.2 shaft (${\phi}6.8m{\times}33m$), ) and it was connected two shaft in Tunneling. The first, it was needed to investigate the surey of influenced of vibration and noise by blastig to near by housing structure. 2nd, it was essential to decide the boundary line of influenced for agriculture water and portable water, by draw down of underground water. Blasting works has been done successfully without any problem, but by draw down of underground water, with in 250m level from #1 shaft, agriculture well drilled 8 place and portable water well drilled 7 place for near by farmers.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권6호통권58호
• /
• pp.192-203
• /
• 2009

본 연구는 경부고속철도(대구~부산) 도심통과 노반신설 공사중 기존 부산지하철 1호선 및 부산지하철 2호선 구간에 대한 안정성에 관한 연구로서 현장조사를 실시하여 대상시설물의 외관상태, 품질상태 및 내구성능 등을 평가하고 MIDAS/GTS를 이용한 수치해석을 통해 대상시설물 및 본선터널의 안정성을 검토하는데 그 목적이 있다. 지하수위 하에서 터널이 시공되는 기본 메카니즘과 3차원 유한요소해석 응력-간극수압 연계해석을 수행한 후 라이닝 작용하중, 막장안정성, 지표침하 등 지하수와 터널굴착의 상호관계를 고찰하였다. 수치해석의 결과 1, 2호선의 최대침하, 부등침하, 라이닝응력 등은 허용치 이내이며 손상 정도는 무시할 수 있는 정도의 경미한 것으로 나타나고 있다. 그러나 실제 터널 시공시 막장거동을 최소화하기 위하여 필요시 Pre-Grouting을 시행하여 터널 굴착시 터널내 유출수를 최소화하는 것이 필요할 것으로 판단된다.

• 대한전기학회논문지
• /
• 제44권12호
• /
• pp.1610-1616
• /
• 1995

The (Sr$_{1-x}$ .Ca$_{x}$)TiO$_{3}$(0.05.leq.x.leq.0.2) ceramics were fabricated to form semiconducting ceramics by sintering at about 1350[.deg. C] in a reducing atmosphere (N$_{2}$ gas). After being fired in a reducing atmosphere, metal oxides, CuO, was painted on the both surface of the specimens to diffuse to the grain boundary. They were annealed at 1100[.deg. C] for 2 hours. The 2nd phase formed by thermal diffusing from the surface lead to a very high apparent dielectric constant. The results of the capacitance-valtage measurements indicated that the grain boundary was composed of the continuous insulating layers. The capacitance is almost unchanged below about 20[V], but decreased slowly over 20[V]. The conduction mechanism of the specimens observed in the temperature range of 25~125[.deg. C], and is divided into three regions having different mechanism as the current increased: the region I below 200[V/cm] shows the ohmic conduction. The region II between 200[V/cm] and 2000[V/cm] can be explained by the Poole-Frenkel emission theory, and the region III above 2000[V/cm] is dominated by the tunneling effect.ct.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.140-140
• /
• 2000

The initial growth mode of Nb on Ag(11) in sub-monolayer regime and the influence of subsequent 520K annealing are studied using UHV Scanning Tunneling Microscopy. E-beam evaporated Nb is deposited onto the substrate at RT, and STM measurements are carried out at RT and 78 K. With Nb being immiscible in bulk Ag, 3D islands formation begins at early stage and no particular ordered structure is found. After annealing to 520K, most of islands are disappeared from terrace. There exist 2 possibilities. : (1) Diffusion of Nb into the 2nd or 3rd layer of Ag substrate or (2) agglomeration of Nb on Ag at higher temperature. A model will be given to explain the evidence. In addition, we investigated the change of STM image according to bias voltage depending on island size. Possible physical mechanism responsible for such behavior together with interaction between Nb islands and reactive gases will be also discussed.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.611-618
• /
• 1995

The (Sr$_{1-x}$ .Ca$_{x}$)TiO$_{3}$+0.6[mol%]Nb$_{2}$O$_{5}$ (0.05.leq.x.leq.0.2) ceramics were fabricated to form semiconducting ceramics by sintering at about 1350[.deg. C] in a reducing atmosphere(N$_{2}$ gas). Metal oxides, CuO, was painted on the both surface of the specimens to diffuse to the grain boundary. They were annealed at 1100 [.deg. C] for 2 hours. The 2nd phase formed by thermal diffusing from the surface lead to a very high apparent dielectric constant. According to increase of the frequency as a functional of temperature, all specimens used in this study showed the dielectric relaxation, and the relaxation frequency was above 106 [Hz], it move to low frequency with increasing resistivity of grain. The specimens showed three kinds of conduction mechanisms in the temperature range 25-125 [.deg. C] as the current increased: the region I below 200 [V/cm] shows the ohmic conduction. The region rt between 200 [V/cm] and 2000 [V/cm] can be explained by the Poole-Frenkel emission theory, and the region III above 2000 [V/cm] is dominated by the tunneling effect.fect.