• 제목/요약/키워드: ${Li_2}{CO_3}$

검색결과 885건 처리시간 0.027초

한국산 개불, Urechis unicinctus (von Drasche)의 생식주기 (Reproductive Cycle of the Echiuroid Worm Urechis unicinctus(von Drasche) in Southern Korea)

  • 최상덕;김호진;이원교;곽은주;윤호섭;라성주;이인곤
    • 한국양식학회지
    • /
    • 제13권2호
    • /
    • pp.169-174
    • /
    • 2000
  • 한국산 개불의 명확한 생식주기를 밝히고 종묘생산을 위한 기초 자료를 얻기 위하여 1998년 9월부터 1999년 8월까지 주로 조직학적 방법에 의해 생식소의 발달양상과 산란시기를 조사하였다. 생식소중량지수(GSI)는 11월에 암, 수 각각 7.01, 6.24로 연중 최고 값을 도였으며, 이후 급격히 감소하여 2월에 암수 각각 0.52, 1.04로 연중 최소 값을 보였다. 그 후 GSI는 급격히 증가하여 3~4월에 높은 값을 나타내었고, 5월부터 다시 감소하기 시작하여 8월까지 특이한 변화가 없었다. 그리고 GSI는 10~ll월에 다시 증가하였다. GSI의 연중 변화를 종합해 볼 때 한국산 개불은 연 2회 산란한 것으로 판단된다. 개불의 난경 변화는 산란기인 12월에 평균난경은 96.16 ${\mu}$m였으며, 이후 급격히 감소하나 3월부터 서서히 증가하기 시작하여 4월에 평균난경 81.52${\mu}$m, 5월에 105.20~29.60${\mu}$m의 높은 변화를 보였다. 암컷의 생식주기는 분열증식기91~2월, 6~9월), 성숙기(3~4월, 11월), 방출기(5월, 12월), 퇴화 및 휴지기(1월, 6월) 로 나눌 수 있고, 수컷의 생식주기는 분열증식기(1~2월, 6~9월), 성숙기(3~4월, 10~11월), 방출기(5월, 12월) 그리고 퇴화 및 휴지기(1월, 6월)로 나눌 수 있다. 개불의 난소에 있어 조직학적인 가장 큰 변화는 GSI가 가장 높은 11월과 3월에 주변인기의 난모세포가 관찰되었고, 생식소내 난모세포들의 성숙은 일괄적으로 일어난다. 정소는 정소내벽에서 분화.성숙되어 정소 내부로 떨어져 나오며 완숙시의 정소 조직은 초기의 정소와 비교하여 얇은 막으로만 이루어졌다.imer를 사용했을 경우 RAPD분석 결과 종간 및 종 내의 지역적 유전적 변이를 확인 할 수 있었다. 그러나 K16/17과 K20/21 primer를 이용한 경우 종 내의 지역별 유전적 변이는 확인할 수 없었다. K13 primer의 경우 유사도 (similarity)는 보라성게 종 내의 지역적 차이가 0.67-0.92, 말똥성게의 경우 종 내의 지역적 변이 폭이 0.60-0.73으로 나타났으며 보라성게와 말똥성게의 종간 유사도는 17-44%로 낮게 나타났다. 제주 연안에 있어 지역에 따른 보라성게와 말똥성게의 크기, GSI등의 변이는 유전적 차이보다는 수온과 먹이 등 과 같은 생태학적 요인에 기인한 것으로 판단되었다.ngto contains relatively high amount of trace elements, P, S, Zr, Sr, Ba, Rb, and Ce including considerable amount of Li, V, Cr, Zn, Co, Ni, Cu, Y, Nb, La, Nd, Pb, Th in excess of 10 ppm. Relatively high amount of most trace elements were detected in the Hwangto. The major and minor chemical compositions of the Hwangto were different depending on the types of host rocks. However, their difference was in the similar range compared with the compositions of host rocks. electron acceptor triggers sensory transduction processes

  • PDF

Polymorphisms in Epigenetic and Meat Quality Related Genes in Fourteen Cattle Breeds and Association with Beef Quality and Carcass Traits

  • Liu, Xuan;Usman, Tahir;Wang, Yachun;Wang, Zezhao;Xu, Xianzhou;Wu, Meng;Zhang, Yi;Zhang, Xu;Li, Qiang;Liu, Lin;Shi, Wanhai;Qin, Chunhua;Geng, Fanjun;Wang, Congyong;Tan, Rui;Huang, Xixia;Liu, Airong;Wu, Hongjun;Tan, Shixin;Yu, Ying
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권4호
    • /
    • pp.467-475
    • /
    • 2015
  • Improvement for carcass traits related to beef quality is the key concern in beef production. Recent reports found that epigenetics mediates the interaction of individuals with environment and nutrition. The present study was designed to analyze the genetic effect of single nucleotide polymorphisms (SNPs) in seven epigenetic-related genes (DNMT1, DNMT3a, DNMT3b, DNMT3L, Ago1, Ago2, and HDAC5) and two meat quality candidate genes (CAPN1 and PRKAG3) on fourteen carcass traits related to beef quality in a Snow Dragon beef population, and also to identify SNPs in a total of fourteen cattle populations. Sixteen SNPs were identified and genotyped in 383 individuals sampled from the 14 cattle breeds, which included 147 samples from the Snow Dragon beef population. Data analysis showed significant association of 8 SNPs within 4 genes related to carcass and/or meat quality traits in the beef populations. SNP1 (13154420A>G) in exon 17 of DNMT1 was significantly associated with rib-eye width and lean meat color score (p<0.05). A novel SNP (SNP4, 76198537A>G) of DNMT3a was significantly associated with six beef quality traits. Those individuals with the wild-type genotype AA of DNMT3a showed an increase in carcass weight, chilled carcass weight, flank thicknesses, chuck short rib thickness, chuck short rib score and in chuck flap weight in contrast to the GG genotype. Five out of six SNPs in DNMT3b gene were significantly associated with three beef quality traits. SNP15 (45219258C>T) in CAPN1 was significantly associated with chuck short rib thickness and lean meat color score (p<0.05). The significant effect of SNP15 on lean meat color score individually and in combination with each of other 14 SNPs qualify this SNP to be used as potential marker for improving the trait. In addition, the frequencies of most wild-type alleles were higher than those of the mutant alleles in the native and foreign cattle breeds. Seven SNPs were identified in the epigenetic-related genes. The SNP15 in CAPN1 could be used as a powerful genetic marker in selection programs for beef quality improvement in the Snow Dragon Beef population.

고 에너지 방사선치료에서 환자의 피폭선량 분포와 생식선의 차폐 (Shielding for Critical Organs and Radiation Exposure Dose Distribution in Patients with High Energy Radiotherapy)

  • 추성실;서창옥;김귀언
    • Journal of Radiation Protection and Research
    • /
    • 제27권1호
    • /
    • pp.1-10
    • /
    • 2002
  • 의료용 선형가속기에서 발생되는 고 에너지 광자선은 콜리메이터에 의하여 누출되며 치료두부(head), 콜리메이터, 환자를 포함한 치료실내의 모든 벽과 구성 물질들에 의하여 많은 산란선이 발생된다. 방사선치료는 종양에 따라서 최소한 40 Gy에서 80 Gy까지 조사되기 때문에 주위건강조직 특히 생식가능한 사람에 대한 생식선의 피폭선량을 평가하여야하며 종양치료에 영향을 주지 않은 범위에서 가능한 방법을 동원하여 피폭선량을 줄여야한다. 방사선 안전관리등의 기술기준에 관한 규칙(과학기술부령 제17호) 제3절 의료분야의 특별기준, 제44조(진료환자의 방사선 피폭)에 의하면 진료를 위한 환자 피폭선량을 합리적으로 달성 가능한 최소의 수준으로 유지하기 위한 절차를 구비하여야 하며 과학기술부 장관은 이에 준하는 의료시설 및 장비취급의 기술기준을 정하고 고시하여야한다고 명시 되어있다. 고 에너지방사선은 악성종양환자들의 치료성과를 향상시키는 동시에 치료후 방사선에 의한 만성효과가 발생 될 수 있기 때문에 주선속의 다양한 산란선과 누출선의 선질변화와 선량을 측정하고 생식선과 같은 주요장기를 산란선으로부터 차폐할 수 있는 기구를 제작 사용함으로서 방사선 피폭선량을 최대한으로 감소시킬 수 있었다. 고 에너지 방사선은 의료용 선형가속기(CLINAC 2100C/D. 2100C. 600C)에서 발생시킨 4, 6, 10 MV x-ray와 코발트원격치료장치(ALCYON II)의 코발트선원에서 방출되는 1.25 MV의 감마선을 이용하였다. 선량측정은 폴리스틸렌과 인체팬텀(Rando)사용하였으며 측정기는 이온함, TLD 및 필름을 사용하였다. 고 에너지 방사선에 의한 산란선은 장치의 콜리메이터 뿐만 아니라 치료실 벽 인체내부등 모든 방향에서 방사됨으로 납 벽돌에 의한 차폐율측정은 많은 변수를 가졌으며 고환인 경우에는 3면이 모두 차폐되도록 항아리모양으로 제작하였다. 태아인 경우 태아가 위치하고 있는 골반위에 육교모양의 선반을 만들고 그 위에 납 벽돌을 장치하도록 고안하였다. Co-60 감마선, 4 MV x-선, 10 MV x-선에서 발생되는 누출선량과 산란선량에 의한 평균 피폭선량은 조사면 중심으로부터 10, 30, 60cm 거리에서 조사면내 최대선량에 대하여 각각 $10^{-2},\;10^{-3},\;10^{-4}$의 비율로 측정되었으며 거리에 따라 지수함수로 줄어들었다. 흉부에 국한된 종양을 10 MV x-ray, $12{\times}12 cm^2$ 조사면으로 치료하였을 때 자궁에 받는 피폭선량은 0.9 mGy/Gy이며 고환이 받는 피폭선량은 0.6 mGy/Gy 이었으며 체장과 신장은 각각 4.8 mGy/Gy 와 2.5 mGy/Gy이다 10 MV x-선, $14{\times}14cm^2$ 조사면 경계로부터 10 cm 밖에서 납벽돌의 반가층 두께는 약 9.0 mm 이였고 20cm 밖에서는 반가층 두께가 약 6.5 mm로 측정되었다. 복부에 위치한 악성종양을 60 Gy 조사하였을 경우 태아가 위치하고 있는 자궁의 피폭선량은 약 370 mGy이고 이곳을 10 mGy이하가 되도록 차폐하려면 약 6.2 cm두께의 납 벽돌을 자궁위에 장착하여야 하며 골반치료시 고환에 10 mGy이하가 되도록 차폐하려면 약 5 cm 두께의 납 항아리가 요구된다. 고 에너지 고 준위 방사선치료시 고환은 3면을 항아리모양으로 차폐할 수 있어 피폭선량을 상당히 줄일 수 있으며 자궁인 경우 체내에서 산란된 선량의 차폐는 불가능하였다.

도입 사일리지용 옥수수의 품종과 식물체 부위에 대한 사료가치와 생산성 비교 (Comparison of the Forage Quality and Productivity According to Varieties and Plant Parts of Imported Silage Corn (Zea mays, L))

  • 김종근;;;정은찬;김학진
    • 한국초지조사료학회지
    • /
    • 제40권2호
    • /
    • pp.98-105
    • /
    • 2020
  • 본 시험은 도입되는 사일리지용 옥수수의 품종과 식물체 부위에 따른 사료가치와 생산성을 비교하기 위하여 수행하였다. 시험에 이용된 옥수수 품종은 미국 Pioneer Hybrid Co.에서 도입된 8개 품종(P1184, P1151, P1194, P1543, P1345, P1429, P1443 및 P2105)으로 강원도 평창군에 위치한 서울대학교 평창캠퍼스 내에 있는 시험포에서 수행하였다. 수확한 옥수수는 전체 5개 부위(leaf, stem, cob, husk 및 grain)로 분리하여 건조한 후 각 부위별 비율을 산정하였고 사료가치를 분석하였다. 옥수수의 출현율은 P1151 및 P2105품종을 제외하고는 대체로 양호하였다. 출수기는 평균 7월 24일, 출사기는 7월 27일 이었으나 P2105 품종은 7월 28일 및 8월 1일로 늦었고 나머지 품종은 비숫하였다. 초장 및 착수고에 있어서는 P1345 품종이 가장 컸으며(289 및 123 cm), P1151 품종이 가장 작았다(267 및 101 cm). 질병 저항성은 P1184, P1443 및 P1429에서 낮았고 P1197 및 P1345는 높았다. 건물함량은 경엽의 경우 P1151 품종에서 19.6%로 가장 낮았으며 P1429 품종에서 24.9%로 가장 높게 나타났다. 암이삭은 만생 품종인 P2105 품종이 가장 높았고(55.5%) P1184(54.2%) 및 P1345(54.3%) 품종도 유의적으로 높게 나타났다 (p<0.05). P2105, P1429 및 P1194 품종의 경엽 건물수량이 유의적으로 높게 나타났으며 (p<0.05), P2105, P1345 및 P1443 품종의 암이삭 건물 수량이 높았다. 5개의 부위로 분리된 식물체(Leaf, Stem, Husk, Cob 및 Grain)의 각 부위별 비율을 살펴보면 대체적으로 암이삭에 해당하는 grain과 cob 합의 비율이 50~60%로 나타나 비교적 높은 비율을 보였다. 포엽(husk)와 속대(cob)의 비율은 대체적으로 비슷하였으며 잎과 줄기는 약 20% 내외의 비율을 보여주었다. 조단백질 함량은 잎이 가장 높았고 그 다음이 grain이었다. 줄기의 조단백질 함량은 가장 낮았으며 포엽(husk)은 품종간에 유의적인 차이가 없었다(P>0.05). ADF 함량은 곡실을 제외한 나머지 부분은 비슷하였지만 잎 부분이 더 낮은 경향을 나타내었으며 줄기와 잎을 제외한 다른 부위는 품종간에 유의적인 차이를 보이지 않았다(p>0.05). NDF 함량은 husk에서는 유의적인 차이가 없었으나 다른 부위는 품종간에 차이를 보였다(p<0.05). 또한 품종별로 부위에 따라 특별한 차이를 보였는데, 줄기는 P2015, 잎은 P1197, 속대는 P1151 포엽은 P1197 그리고 알곡은 P1197에서 NDF 함량이 높게 나타났다. 건물 소화율은 줄기와 알곡에서 유의적인 차이가 없었으나 잎과 암이삭을 구성하는 포엽과 속대에서는 품종간에 차이가 나타났다. 이상의 결과를 종합하여 볼 때 시험에 P2105 품종의 건물수량이 가장 우수하였으며 알곡의 비율은 P1543 및 P1345에서 우수하였다. 또한 사료가치는 잎과 곡실 부분이 높았으며 잎과 줄기가 husk나 cob보다는 사료가치가 높은 것을 알 수 있었다.

칼슘포스페이트 나노-크리스탈이 코팅된 골이식재와 자가골을 병행 이용한 상악동 거상술 (SINUS FLOOR GRAFTING USING CALCIUM PHOSPHATE NANO-CRYSTAL COATED XENOGENIC BONE AND AUTOLOGOUS BONE)

  • 방강미;이보한;알라쉬단;유상배;성미애;김성민;장정원;김명진;고재승;이종호
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제31권3호
    • /
    • pp.243-248
    • /
    • 2009
  • Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.