• 제목/요약/키워드: ${H_3}{BO_3}$

검색결과 980건 처리시간 0.026초

Electrochemical behavior of dissolved hydrogen at Pt electrode surface in a high temperature LiOH-H3BO3 solution: Effect of chloride ion on the transient current of the dissolved hydrogen

  • Myung-Hee Yun;Jei-Won Yeon
    • Nuclear Engineering and Technology
    • /
    • 제55권10호
    • /
    • pp.3659-3664
    • /
    • 2023
  • The electrochemical behavior of dissolved hydrogen (H2) was investigated at a Pt electrode in a high temperature LiOH-H3BO3 solution. The diffusion current of the H2 oxidation was proportional to the concentration of the dissolved H2 as well as the reciprocal of the temperature. In the polarization curve, a potential region in which the oxidation current decreases despite an increase in the applied potential between the H2 oxidation and the water oxidation regions was observed. This potential region was interpreted as being caused by the formation of a Pt oxide layer. Using the properties of the Cl- ion that reduces the growth rate of the Pt oxide layer, it was confirmed that there is a correlation between the Cl- ion concentration and the transient current of the H2 oxidation.

분광계에 의한 Borosilicate계 글라스의 조성 및 온도의존성 평가 (Composition and Temperature Dependence of Structural Changes in Borosilicate Glasses by Spectrometer)

  • 박성제;류봉기
    • 한국재료학회지
    • /
    • 제15권12호
    • /
    • pp.786-790
    • /
    • 2005
  • We investigated the particularity of temperature and composition changes in $xNa_2O{\cdot}(52.5-x)B_2O_3{\cdot}47.5SiO_2$ glasses by use of FT-IR, $^{11}B$ NMR, Raman spectrometer. From FT-IR and $^{11}B$ NMR spectrometer, we thought that tetrahedral boron, $BO_4$ units are created $N_4$ increasing tendency generated near $600^{\circ}C$. It's expected that composition ana heat treatment directly contributed to structural changes, this changes are following to $Na_2O$ increasing or decreasing. caused by $N_4\;and\;BO_4$ units are caused by relatively increasing or decreasing in the glasses' structure. Particularly, $BO_4$ units are converted to $BO_3$ units after $600^{\circ}C$ heat treatment for 50h in the composition of $x<18(R<0.5,\;R=Na_2O/B_2O_3\;mol\%)$. On the order hand, $BO_3$ units are converted to, $BO_4$ units after $600^{\circ}C$ heat treatment for 50h in the composition of $x{\geq}18\;(R>0.5)$. This particularity of composition and temperature dependence of structural changes are similarly represented by Raman analysis results.

냉 음극 형광 램프용 Y2O3:Eu3+ 적색 형광체에 대한 이종 Flux 혼합첨가의 영향 (Effect of Different Fluxes in Preparation of Y2O3:Eu3+ Red Phosphor Used for Cold Cathode Fluorescence Lamp)

  • 구자인;김상문;신학기;박홍채;윤석영
    • 한국재료학회지
    • /
    • 제19권3호
    • /
    • pp.163-168
    • /
    • 2009
  • $Eu^{3+}$-doped $Y_2O_3$ red phosphor was synthesized in a flux method using the chemicals $Y_2O_3,\;Eu_2O_3,\;H_3BO_3$ and $BaCl_2{\cdot}2H_2O$. The effect of a flux addition on the preparation of $Y_2O_3:Eu_{3+}$ red phosphor used as a cold cathode fluorescence lamp was investigated. $H_3BO_3$ and $BaCl_2{\cdot}2H_2O$ fluxes were used due to their different melting points. The crystallinity, thermal properties, morphology, and emission characteristics were measured using XRD, TG-DTA, SEM, and a photo-excited spectrometer. Under UV excitation of 254 nm, $Eu_2O_3$ 3.7 mol% doped $Y_2O_3$ exhibited a strong narrow-band red emission, peaking at 612 nm. From this result, the phosphor synthesized by firing $Y_2O_3$ with 3.7 mol% of $Eu_2O_3$, 0.25 mol% of $H_3BO_3$ and 0.5 mol% of $BaCl_2{\cdot}2H_2O$ fluxes at $1400^{\circ}C$ for 2 hours had a larger particle size of $4{\mu}m$ on average compared to the phosphor of the $H_3BO_3$ flux alone. In addition, a phosphor synthesized by the two fluxes together had a rounder corner shape, which led to the maximum emission intensity.

Citrate Sol-Gel법에 의한 Perovskite형 복합 산화물 LaBO3(B = Mn, Fe, Co)의 생성 및 환원 반응성 (Reactivity and Preparation of Perovskite-Type Mixed Oxides LaBO3(B = Mn, Fe, Co) by Citrate Sol-Gel Method)

  • 황호순;박일현
    • 대한화학회지
    • /
    • 제38권4호
    • /
    • pp.276-282
    • /
    • 1994
  • Citrate sol-gel법을 이용하여 perovskite형 복합산화물 LaBO$_3$(B = Mn, Fe, Co)을 공기 중 $850^{\circ}C$에서 24시간 동안 소성하여 제조하였다. X-선 회절분석(XRD)과 TPR결과에 의하면 이들 산화물의 결정구조와 산소화학양론은 LaMnO$_{3.16}$(a = 5.507, c = 13.329 $\AA$, hexagonal), LaFeO$_{3.17}$(a = 5.554, b = 5.555, c = 7.863 $\AA$, orthorhomibic), LaCoO$_{3.0}$(a = 5.436, c = 13.095 $\AA$, hexagonal)으로 수소 분위기(300torr)에서의 TPR결과에 의하면 이들 산화물은 2단계 환원반응으로 반응이 진행되며, 열적안정성은 LaMnO$_3$ > LaFeO$_3$ > LaCoO$_3$순으로 나타났고, 반응속도론적 결과 역시 LaCoO$_3$의 활성화에너지 값이 가장 낮음을 보였다.

  • PDF

소아에서 13종 호흡기 바이러스에 의한 급성 하기도 감염의 임상 양상 (Clinical characteristics of acute lower respiratory tract infections due to 13 respiratory viruses detected by multiplex PCR in children)

  • 임정숙;우성일;백윤희;권혁일;최영기;한윤수
    • Clinical and Experimental Pediatrics
    • /
    • 제53권3호
    • /
    • pp.373-379
    • /
    • 2010
  • 목 적 : 급성 하기도 감염으로 입원하는 소아에서 최근 알려진 hRV C 및 hBoV를 포함하여 13종 호흡기 바이러스의 임상 양상 및 역학을 알아보고자 하였다. 방 법 : 2008년 5월부터 2009년 4월까지 충북대학교병원 소아과에 급성 하기도 감염으로 입원한 소아 중 325명을 대상으로 비인두 흡인물에서 multiplex RT-PCR법을 이용하여 총 13종의 바이러스를 검출하였으며, 대상 소아의 의무기록을 검토하였다. 결 과 : 대상 소아 중 270례(83.1%)에서 호흡기 바이러스가 검출되었으며, 혼합 감염은 71례(26.3%)에서 관찰되었다. 바이러스 검출 빈도는 RSV 108례(33.2%), hRV 62례(19.1%), Flu A 55례(16.9%), hMPV 50례(15.4%), PIV 27례(8.3%), hBoV 26례(8.0%), ADV 19례(5.8%), hCoV 7례(2.2%)였다. 임상진단은 세기관지염 37.5%, 폐렴 34.5%, 급성 천식 악화 20.9%, 크룹 7.1%이었으며, 세기관지염과 폐렴으로 진단된 소아에서 가장 높은 빈도로 검출된 호흡기 바이러스는 RSV, hRV, hMPV, Flu A였다. Flu A와 hRV는 3세 이상의 천식 악화로 진단된 소아에서 가장 높은 빈도로 검출되었다. hRV A와 hRV C는 각각 48명(14.8%)와 14명(4.3%)에서 검출되었으며, hRV C가 검출된 소아의 평균 연령은 $4.1{\pm}3.5$세로 hRV A가 검출된 소아에서의 $1.7{\pm}2.3$세에 비해 유의하게 높았다(P =0.009). hBoV는 세기관지염 또는 폐렴으로 진단된 소아에서 주로 검출되었고, 이들의 평균 연령은 $2.3{\pm}3.4$세였다. 결 론 : 본 연구에서는 한국 소아에서 13종의 바이러스에 의한 하기도 감염의 양상을 관찰하였다. 소아 하기도 감염에서 새로 알려진 바이러스들의 역할을 명확히 알기 위해서는 향후 지속적인 연구가 필요하다.

Yb:YCa4O(BO3)3 단결정 성장과 분광 및 열적 특성 연구 (Crystal Growth of Yb:YCa4O(BO3)3 and Investigation of Spectroscopic and Thermal Properties)

  • 김충렬;이현준;유영문
    • 한국세라믹학회지
    • /
    • 제39권8호
    • /
    • pp.795-800
    • /
    • 2002
  • 융액인상법으로 질소분위기 하에서 $Yb^{3+}$ 이온이 20at% 고용된 $Yb:YCa_4O(BO_3)_3$ (Yb:YCOB) 단결정을 이리듐 도가니를 사용하여 성장시켰다. 양질의 단결정을 성장시키기 위한 인상속도와 회전속도는 각각 1.5∼2 mm/h와 10∼20 rpm이었다. 분광물성 측정 결과, 흡수단이 236 nm에 있었으며, 전형적인 $Yb^{3+}$ 이온의 흡수 스펙트럼이 관찰되었다. Yb:YCOB의 열팽창계수는 320∼650 K의 측정범위에서 결정학적 축 a, b 그리고 c에 대해 12.1×$10^{-6}$ /K, 5.9${\times}10^{-6}$/K, 12.9${\times}10^{-6}$이었다. 비열은 330 K에서 0.162 $cal/g{\cdot}K$이었다.

Measurement of the applicability of various experimental materials in a medically relevant reactor neutron source part two: Study of H3BO3 and B-DTPA under neutron irradiation

  • Ezddin Hutli;Peter Zagyvai
    • Nuclear Engineering and Technology
    • /
    • 제55권7호
    • /
    • pp.2419-2431
    • /
    • 2023
  • Experiments related to Boron Neutron Capture Therapy (BNCT) accomplished at the Institute of Nuclear Techniques (INT), Budapest University of Technology and Economics (TUB) are presented. Relevant investigations are required before designing BNCT for vivo applications. Samples of relevant boron compounds (H3BO3, BDTPA) usually employed in BNCT were investigated with neutron beam. Channel #5 in the research reactor (100 kW) of INT-TUB provides the neutron beam. Boron samples are mounted on a carrier for neutron irradiation. The particle attenuation of several carrier materials was investigated, and the one with the lowest attenuation was selected. The effects of boron compound type, mass, and compound phase state were also investigated. To detect the emitted charged particles, a traditional ZnS(Ag) detector was employed. The neutron beam's interaction with the detector-detecting layer is investigated. Graphite (as a moderator) was employed to change the neutron beam's characteristics. The fast neutron beam was also thermalized by placing a portable fast neutron source in a paraffin container and irradiating the H3BO3. The obtained results suggest that the direct measurement approach appears to be insufficiently sensitive for determining the radiation dose committed by the Alpha particles from the 10B (n,α) reaction. As a result, a new approach must be used.

The Spectra Investigation of the Halo Planetary Nebula BoBn 1

  • Hyung, Siek;Otsuka, Masaaki;Tajitsu, Akito;Izumiura, Hideyuki
    • 천문학회보
    • /
    • 제35권2호
    • /
    • pp.72.2-72.2
    • /
    • 2010
  • The extremely metal-poor halo planetary nebula BoBn 1 has been investigated based on IUE archive data, Subaru/HDS spectra, VLT/UVES archive data, and Spitzer/IRS spectra. We have measured a heliocentric radial velocity of $+191.6\pm1.3\;kms^{-1}$ and expansion velocity 2Vexp of $40.5\pm3.3\;kms^{-1}$ from an average over 300 lines. The estimations of C, N, O, and Ne abundances from the optical recombination lines (ORLs) and Kr, Xe, and Ba from the collisional excitation lines (CELs) are also done. We have detected 5 fluorine and several slow neutron capture elements (the s-process). The amounts of [F/H], [Kr/H], and [Xe/H] suggest that BoBn 1 is the most F-rich among F detected PNe and is a heavy s-process element rich PN. The photo-ionization models built with non-LTE theoretical stellar atmospheres indicate that the progenitor was a 1-1.5 $M_\bigstar$ that would evolve into a white dwarf with an $0.62M_{\odot}$ core mass and $0.09M_{\odot}$ ionized nebula. Careful examination implies that BoBn 1 has evolved from a binary and experienced coalescence during the evolution to become a visible PN. The elemental abundances except N could be explained by a binary model composed of $0.75M_{\odot}+1.5M_{\odot}$ stars.

  • PDF

Effect of pH on the Luminescence of $(Y,Gd)BO_3:Eu^{3+}$ Phosphor Prepared by the Coprecipitation Method

  • Lee, Gwan-Hyoung;Kang, Shin-Hoo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1514-1517
    • /
    • 2005
  • The $(Y,Gd)BO_3:Eu^{3+}$ phosphor was made by coprecipitation method. The precipitated powders were amorphous. The value of pH in the process of coprecipitation was critical for the luminescence of phosphors. The particle size and morphology were influenced by pH value. The lower calcination temperature and hydrothermal synthesis leads to the distortion of lattices. The distorted lattices changed the symmetry of $Eu^{3+}$ site. The broken inversion symmetry in the distorted lattice caused the increased emission of $^5D_0{\rightarrow}^7D_2$ transition.

  • PDF

Effect of Li3BO3 Additive on Densification and Ion Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes of All-Solid-State Lithium-Ion Batteries

  • Shin, Ran-Hee;Son, Sam-Ick;Lee, Sung-Min;Han, Yoon Soo;Kim, Yong Do;Ryu, Sung-Soo
    • 한국세라믹학회지
    • /
    • 제53권6호
    • /
    • pp.712-718
    • /
    • 2016
  • In this study, we investigate the effect of the$Li_3BO_3$ additive on the densification and ionic conductivity of garnet-type $Li_7La_3Zr_2O_{12}$ solid electrolytes for all-solid-state lithium batteries. We analyze their densification behavior with the addition of $Li_3BO_3$ in the range of 2-10 wt.% by dilatometer measurements and isothermal sintering. Dilatometry analysis reveals that the sintering of $Li_7La_3Zr_2O_{12}-Li_3BO_3$ composites is characterized by two stages, resulting in two peaks, which show a significant dependence on the $Li_3BO_3$ additive content, in the shrinkage rate curves. Sintered density and total ion conductivity of the system increases with increasing $Li_3BO_3$ content. After sintering at $1100^{\circ}C$ for 8 h, the $Li_7La_3Zr_2O_{12}-8$ wt.% $Li_3BO_3$ composite shows a total ionic conductivity of $1.61{\times}10^{-5}Scm^{-1}$, while that of the pure $Li_7La_3Zr_2O_{12}$ is only $5.98{\times}10^{-6}Scm^{-1}$.