• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1415-1421
• /
• 2015

This study was performed to investigate the effects of puffed-red ginseng (PRG) powder and drink on blood glucose level and serum lipid profile in streptozotocin (STZ)-induced diabetic rats. For the experimental design, STZ-induced diabetic rats were fed PRG powder-supplemented diets (0.3%, 0.6%) and diluted drinks (0.14%, 0.28%) for 6 weeks. Concentrations of blood glucose during the experimental period decreased to 18.3 mg/dL in the 0.6% PRG diet group and 15.1 mg/dL in the 0.14% PRG drink group. Average reduction rate of blood glucose in the last week compared to reference blood glucose concentration decreased by 19.2% (A group), 37.4% (B group), 18.7% (C group), and 17.3% (D group) in the PRG treatment groups, respectively. These results indicate that PRG affects blood glucose via ginseng saponins administered in diet or drinking water, thereby suggesting that PRG has the ability to prevent increasing blood glucose in mild-induced diabetic rats.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.1
• /
• pp.29-42
• /
• 2003

The KSR-3 magnetometers consist of the fluxgate magnetometer (MAG/AIM) for acquiring the rocket flight attitude information, and the search-coil magnetometer (MAG/SIM) for the observation of the Earth's magnetic fluctuations. The position (latitude, longitude, and height) and flight condition (the transformation angle) of the rocket is measured after the data based on these two magnetometers are compared with IGRF The gap in the vector of magnetic field between the position of the launching point and an impact point is taken into account in data reduction. Angular variation of pitch, yaw, and roll can be researched when the data is applied to the coordinate system of the rocket.

• Journal of Life Science
• /
• v.30 no.2
• /
• pp.162-168
• /
• 2020

Because of a continual reduction in its domestic market share, the quality of the Makgeolli, a Korean traditional liquor, needs to be upgraded. Among the several options for quality improvement, sufficient organoleptic expression of flavor is very important. We analyzed production changes of isoamyl acetate, which has a banana smell, based on fermentation temperature and sugar content through the cultivation of S. cerevisiae 98-5 KCCM 11396P using generally polished rice. The banana flavor of that fermentation mash was organoleptically high at 20℃, but a larger amount of isoamyl acetate was obtained with a higher sugar content at 10℃, based on analysis by GC-MS. Consequently, sufficient production of banana flavor from isoamyl acetate was based on the concentration of isoamyl alcohol as a substrate compound of isoamyl acetate, and the production depended highly on the maintenance of heat stability, since it is unstable in temperature and the minimized inhibition of alcohol acetyl transferase by unsaturated fatty acids. We also found that production of the flavor component required the addition of sugar and a slightly higher temperature of 20~25℃ at the beginning stage of fermentation, with additional mash fermentation and a gradual decrease in temperature to 10~15℃.

• The Korean Journal of Pain
• /
• v.29 no.2
• /
• pp.110-118
• /
• 2016

Background: Nefopam is a non-opioid, non-steroidal, centrally acting analgesic drug. The concomitant use of opioids and nefopam is believed to have many advantages over the administration of opioids alone for postoperative pain management. We conducted a randomized, double-blind study to determine the fentanyl-sparing effect of co-administration of nefopam with fentanyl for postoperative pain management via patient controlled analgesia (PCA). Methods: Ninety female patients who underwent laparoscopic total hysterectomy under general anesthesia were randomized into 3 groups, Group A, fentanyl $1,000{\mu}g$; Group B, fentanyl $500{\mu}g$ + nefopam 200 mg; and Group C, fentanyl $500{\mu}g$ + nefopam 400 mg, in a total volume of 100 ml PCA to be administered over the first 48 h postoperatively without basal infusion. The primary outcome was total fentanyl consumption during 48 h; secondary outcomes included pain scores and incidence of side effects. Results: Eighty-one patients were included in the analysis. The overall fentanyl-sparing effects of PCA with concomitant administration of nefopam during the first 48 h postoperatively were 54.5% in Group B and 48.9% group C. Fentanyl use was not significantly different between Groups B and C despite the difference in the nefopam dose. There were no differences among the three groups in terms of PCA-related side effects, although the overall sedation score of Group B was significantly lower than that of Group A. Conclusions: The concomitant administration of nefopam with fentanyl for postoperative pain management may allow reduction of fentanyl dose, thereby reducing the risk of opioid-related adverse effects.

• Journal of Radiation Protection and Research
• /
• v.23 no.3
• /
• pp.149-157
• /
• 1998

An analysis has been performed to estimate the additional number of workers and the additional collective dose in man-cSv which would be required, nuclear industry-wide as a result of reducing individual dose limit. This analysis can be extended to the reduction in the dose limits recommended by ICRP Publ.60 and BEIR V report as well as the proposed dose limits by regulatory authorities. An industry-wide database was employed in the analysis based on a summary of industry-wide occupational radiation exposure compiled by the Korea Radioisotope Association. Correlation model was employed to compute the affects of setting specific annual individual dose limits. In this study, we have addressed worker non-productivity while in the radiation environment on a parametric or 'sensitivity analysis' basis. This alleviates the need for developing such data underlying a summation of many individual tasks at many nuclear facilities. It has the advantage that very low non-productivity assumptions can readily be defended as conservative, in that it is difficult to approach such low worker non-productivity factors even in the best of environments in any industry. On a per facility basis, for calendar year 1997, the number of workers required would be increased from 231 workers to 269 workers and collective man-cSv dose would be also increased by approximately fourteen percent if the individual dose limit was reduced to 2 cSv/y and an individual worker non-productivity fraction of 0.1 is assumed.

• Sleep Medicine and Psychophysiology
• /
• v.3 no.1
• /
• pp.47-55
• /
• 1996

Narcolepsy is characterized by sleep attack with excessive daytime sleepiness(EDS), cataplexy, sleep paralysis, and hypnagogic hallucination. Paradoxically, narcoleptics tend to complain of frequent arousals and shallow sleep during the night time despite their excessive sleepiness. However, nocturnal sleep fragmentation in narcoleptics is relatively ignored in treatment strategies, compared with sleep attack/EDS and cataplexy. In our paper, we attempted to investigate further on the poor nocturnal sleep in narcoleptics and to discuss possible treatment interventions. Out of consecutively seen patients at Seoul National University Sleep Disorders Clinic and Division of Sleep Studies, we recruited 57 patients, clinically assessed as having sleep attack and/or EDS. Nocturnal polysomnography and multiple sleep latency test(MSLT) were done in each of the subjects. We selected 19 subjects finally diagnosed as narcolepsy(mean age $26.0{\pm}18.3$ years, 16 men and 3 women) for this study, depending on the nocturnal polysomnographic and MSLT findings as well as clinical history and symptomatology. Any subject co-morbid with other hypersomnic sleep disorders such as sleep apnea or periodic limb movements during sleep was excluded. Sleep staging was done using Rechtschaffen and Kales criteria. Sleep parameters were calculated using PSDENT program(Stanford Sleep Clinic, version 1.2) and were compared with the age-matched normal values provided in the program. In narcoleptics, compared with the normal controls, total wake time was found to be significantly increased with significantly decreased sleep efficiency(p<.01, p<.05, respectively), despite no difference of sleep period time and total sleep time between the two groups. Stage 2 sleep%(p<.05), slow wave sleep%(p<.05), and REM sleep%(p<.01) were found to be significantly decreased in narcoleptics compared with normal controls, accompanied by the significant increase of stage 1 sleep%(p<.01). Age showed negative correlation with slow wave sleep%(p<.05). The findings in the present study indicate significant fragmentation of nocturnal sleep in narcoleptics. Reduction of REM sleep% and the total number of REM sleep periods suggests the disturbance of nocturnal REM sleep distribution in narcoleptics. No significant correlations between nocturnal polysomnographic and MSLT variables in narcoleptics suggest that nocturnal sleep disturbance in narcoleptics may be dealt with, in itself, in diagnosing and managing narcolepsy. With the objective demonstration of qualitative and quantitative characteristics of nocturnal and daytime sleep in narcoleptics, we suggest that more attention be paid to the nocturnal sleep fragmentation in narcoleptics and that appropriate treatment interventions such as active drug therapy and/or circadian rhythm-oriented sleep hygiene education be applied as needed.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.271-277
• /
• 2014

To overcome the limitations of the solid oxide fuel cells (SOFCs) due to the high temperature operation, there has been increasing interest in proton conducting fuel cells (PCFCs) for reduction of the operating temperature to the intermediate temperature range. In present work, the perovskite $BaCe_{0.85-x}Zr_xY_{0.15}O_{3-\delta}$ (BCZY, x = 0.1, 0.3, 0.5, and 0.7) were synthesized via solid state reaction (SSR) and adopted as an electrolyte materials for PCFCs. Powder characteristics were examined using X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Brunauer, Emmett and Teller (BET) surface area analysis. Single phase BCZY were obtained in all compositions, and chemical stability was improved with increasing Zr content. Anode-supported cell with $Ni-BaCe_{0.55}Z_{0.3}Y_{0.15}O_{3-\delta}$ (BCZY3) anode, BCZY3 electrolyte and BCZY3-$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-\delta}$ (BSCF) composite cathode was fabricated and electrochemically characterized. Open-circuit voltage (OCV) was 1.05 V, and peak power density of 370 ($mW/cm^2$) was achieved at $650^{\circ}C$.

• Korean Journal of Poultry Science
• /
• v.34 no.4
• /
• pp.287-294
• /
• 2007

Current study was conducted to identify the effects of dietary supplementation of Aspergillus oryzae ferments (AOF) cultured under normal (NAOF) or nitrogen-deficient (NMAOF) environment on feed efficiency, nutrient digestibility for broiler chicks. Fecal microbes and ammonia gas production were also determined. A total of 168 male Avian chicks, 2-wk-old, were randomly assigned into 56 cages, three chicks per cage. There were seven treatments (Control, NAOF 0.05, 0.1, 0.5%, NMAOF 0.05, 0.1, 0.5%), with 8 replicates (cages) per treatment. There was no significant difference in nutrient digestibility between two AOF groups, but the digestibility was greatly(p<0.05) improved by AOF supplementation. Total microbial account significantly (p<0.05) differed between the treatment groups with the highest number for NNAOF, followed by NAOF and control. In the case of Escherichia coli and Salmonella, the AOF supplementation significantly (p<0.05) reduced their numbers in feces, with a particular reduction in NNAOF group. Levels of ammonia gas generation were in order of control>NAOP>NNAOP. The current data implied that AOF supplementation, particularly grown under nitrogen-deficient environment, would be a feasible way to improve feed efficiency for broiler production, as well as to reduce environmental cost. However, further studies remain for industrial application.

• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.147-154
• /
• 2003

In this study, the fluorinated carbon blacks(CB) were used to reduce the negative temperature coefficient (NTC) phenomenon of the CB-filled high density polyethylene(HDPE) compounds in the fluorination pressure of 0.1-0.4 MPa. The changes in surface properties of the CB were investigated by using FT-IR, XPS and contact angle measurements. From the FT-IR results, the fluorinated CB showed the C-F absorption peak at 1400-1000 cm$^{-1}$ and the peak intensity was increased with increasing the fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content was increased with increasing the fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB was decreased with increasing the fluorination pressure. Consequently, the increase of fluorine contents on CB made a disappearance of NTC behaviors of CB/HDPE compounds, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulting from decreasing the surface free energy of CB particles.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1123-1129
• /
• 2015

A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.