• 대한수학회지
• /
• 제50권6호
• /
• pp.1271-1290
• /
• 2013

Let M be a fixed left R-module. For a left R-module X, we introduce the notion of M-prime (resp. M-semiprime) submodule of X such that in the case M=R, it coincides with prime (resp. semiprime) submodule of X. Other concepts encountered in the general theory are M-$m$-system sets, M-$n$-system sets, M-prime radical and M-Baer's lower nilradical of modules. Relationships between these concepts and basic properties are established. In particular, we identify certain submodules of M, called "primeM-ideals", that play a role analogous to that of prime (two-sided) ideals in the ring R. Using this definition, we show that if M satisfies condition H (defined later) and $Hom_R(M,X){\neq}0$ for all modules X in the category ${\sigma}[M]$, then there is a one-to-one correspondence between isomorphism classes of indecomposable M-injective modules in ${\sigma}[M]$ and prime M-ideals of M. Also, we investigate the prime M-ideals, M-prime submodules and M-prime radical of Artinian modules.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.342-342
• /
• 2010

We have investigated an Au intercalated monolayer graphene on Ni(111) using angle-resolved photoemission spectroscopy (ARPES), high resolution photoemission spectroscopy (HRPES), and low energy electron diffraction (LEED) at the 3A2 ARUPS beamline in Pohang Accelerator Laboratory. We find the monolayer graphene is well grown on the Ni(111) surface by the adsorption of acetylene. However, the graphene does not show the characteristic $\pi$ band near the Fermi level due to its strong interaction with the underlying substrate. When Au is adsorbed on the surface and then annealed at high temperature, we observe that Au is intercalated underneath the monolayer graphene. The process of the Au intercalation was monitored by HRPES of corresponding Au 4f and C 1s core levels as well as the electronic structure of the $\sigma$, $\pi$ states at $\Gamma$, K points. The $\sigma$, $\pi$ bands of graphene shift towards the Fermi level and the $\pi$ band is clearly observed at K point after the intercalation of full monolayer Au. The full width at half maximum (FWHM) of the C 1s peak narrows to approximately 0.42 eV after intercalation. These results imply that the interaction between the graphene and substrate is considerably weakened after the Au intercalation. We will discuss the graphene is really closer to ideal free standing graphene suggested recently.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.75-78
• /
• 2003

In this paper, a second-order 3-bit DSM using DWA(Data Weighted Averaging) algorithm is designed for bluetooth Zero-IF Receiver. The designed circuit has two integrators using a designed OTA, nonoverlapping two-phase clerk generator, 3-bit A/D converter, DWA algorithm and 3-bit D/A converter An ideal model of second-order lowpass DSM with a 3-bit quantizer was configured by using MATLAB, and each coefficients and design specification of each blocks were determined to have 10-bit resolution in 1MHz channel bandwidth. The designed second-order 3-blt lowpass DSM has maximum SNR of 74dB and power consumption is 50mW at 3.3V.

• Structural Engineering and Mechanics
• /
• 제88권3호
• /
• pp.201-208
• /
• 2023

In this work, the effect of the correction fibers direction on the efficiency of repairing damaged composite plates was highlighted. The composite plates studied in this work consist of eight layers of graphite/epoxy, while the patch used in this repair consists of four layers of the same type. The results obtained in this work, whether with regard to the experimental or analytical side, showed that the fibers orientation affects the repair efficiency, so the closer the angle of fibers inclination is to the tensile strength direction, the performance of the composite material is ideal. Hence, we conclude that the composite materials with longitudinal fibers (Parallel to tensile strength) is the most powerful and efficient material in performance.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.148-153
• /
• 1999

Baikdu-san was a very active volcano during the Cenozoic era and is believed to be formed in late Cenozoic era. Recently it was also reported that there was a major eruption in or around 1002 A.D. and there are evidences which indicate that it is still an active volcano and a potential volcanic hazard. Remote sensing techniques have been widely used to monitor various natural hazards, including volcanic hazards. However, during an active volcanic eruption, volcanic ash can basically cover the sky and often blocks the solar radiation preventing any use of optical sensors. Synthetic aperture radar(SAR) is an ideal tool to monitor the volcanic activities and lava flows, because the wavelength of the microwave signal is considerably longer that the average volcanic ash particle size. In this study we have utilized several sets of SAR data to evaluate the utility of the space-borne SAR system. The data sets include JERS-1(L-band) SAR, and RADARSAT(C-band) data which included both standard mode and the ScanSAR mode data sets. We also utilized several sets of auxiliary data such as local geological maps and JERS-1 OPS data. The routine preprocessing and image processing steps were applied to these data sets before any attempts of classifying and mapping surface geological features. Although we computed sigma nought ($\sigma$$^{0}$) values far the standard mode RADARSAT data, the utility of sigma nought image was minimal in this study. Application of various types of classification algorithms to identify and map several stages of volcanic flows was not very successful. Although this research is still in progress, the following preliminary conclusions could be made: (1) sigma nought (RADARSAT standard mode data) and DN (JERS-1 SAR and RADARSAT ScanSAR data) have limited usefulness for distinguishing early basalt lava flows from late trachyte flows or later trachyte flows from the old basement granitic rocks around Baikdu-san volcano, (2) surface geological structure features such as several faults and volcanic lava flow channels can easily be identified and mapped, and (3) routine application of unsupervised classification methods cannot be used for mapping any types of surface lava flow patterns.

• 한국양식학회지
• /
• 제7권4호
• /
• pp.239-249
• /
• 1994

본 연구는 수질관리를 위한 양식장 순환수 처리를 위하여 유동층공법을 이용할 시, 수리학적 모델인자를 결정하기 위하여 반응기의 혼합특성과 산소전달 특성을 파악하는 연구이다. 삼상유동층 반응기의 dye test에서 얻은 결과 분산$(\sigma^2)$, 분산수 $(D/{\mu}L)$를 살펴보면 분산은 0.47이상이고 분산수는$0.35\~\infty$로 높은분산상태를 나타내는 이상적인 완전혼합반응기로 판단된다. 총괄산소전달계수 값을 측정한 결과 공기주입율이 클수록, 메디아농도가 작을수록, 메디아 입경크기가 작을수록 큰 값을 나타내었다. 총괄산소전달계수$(K_{La})$가 반응조 직경과 draft tube 직경비, 공기주입율, 메디아 농도, 메디아 입경크기에 따른 의존성을 파악하면 아래와 같이 표현된다. $$K_{La}\;=\;44.9(D_i/D_c)^{-0.4611}\;A_f^{0.8622}\;C_m^{-0.0746}\;d_p^{-0.4302}$$

• 대한화학회지
• /
• 제34권2호
• /
• pp.130-135
• /
• 1990

Z-3-파라-톨리치오-4-니트로-3-헥센의 결정은 단사정계에 속하며 a = 13.756 (3), b = 9.310(4), c = 21.305(3) $\AA$, $\beta = 95.0_{\circ}$이며 단위세포안에 8개의 분자가 있으며 2.0$\sigma$(I) 보다 큰 강도를 가진 2935개의 회절반점에 대하여 계단식 대각 최서자승법에 의하여 정밀화된 최종 R값은 0.085이다. 직접법에 의하여 구조를 풀었으며 C-H결합길이와 메칠기는 길이를 고정시켜 이상적인 기하학적구조에 맞도록 하여 계산을 정밀화하였다. 두 분자 A와 B는 끝의 두 에칠기를 제외하고는 거의 유사한 구조를 갖고 있다. 니트로기를 포함한 에틸렌 모양의 골격은 메칠벤젠기에 거의 수직으로 되어 있으며 두 에틸기는 시스-형 구조를 가지고 있으나 끝부분의 메칠기는 A분자에서는 그의 골격에 대해 서로 반대방향으로 향하고 있고 B분자는 같은 방향으로 향하고 있다. 결정내 분자들은 비결합성 van der Waals힘으로 쌓여져 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.23-23
• /
• 2009

It has been challenging to increase the thermoelectric figure of merit ($ZT=S^2{\sigma}T/\kappa$) of materials, which determine the efficiency of thermoelectric devices, because the three parameters Seebeck coefficient (S), electrical conductivity ($\sigma$), and thermal conductivity ($\kappa$) of bulk materials are inter-dependent. With the development of nanotechnology, ZT values of nanostructured materials are predicted to be enhanced by classical size effects and quantum confinement effects. In particular, Bi nanowires were suggested as one of ideal thermoelectric materials due to the expected quantum confinement effects for the simultaneous increase in Sand. In this work, we have investigated the thermal conductivity of individual single crystalline Bi nanowires with d = 98 nm and d = 327 nm in the temperature range 40 - 300 K using MEMS devices. The for the Bi nanowire with d = 98 nm was observed to be ~ 1.6 W/m-K at 300 K, which is much lower than that of Bi bulk (8 W/m-K at 300 K). This indicates that the thermal conductivity of the Bi suppressed due to enhanced surface boundary scattering in one-dimensional structures. Our results suggest that Bi nanowires grown by stress-induced method can be used for high-efficiency thermoelectric devices.

• 대한화학회지
• /
• 제34권1호
• /
• pp.1-9
• /
• 1990

콜레스테릴 펜타노에이트의 결정은 사방정계에 속하며 a = 21.930(3), b = 21.404(3), c = 6.419(5) $\AA$이며 단위세포안에 4개의 분자가 있다. 1.0 $\sigma$ (I)보다 큰 강도를 가진 1,520개의 회절 반점에 대한 최종 R값은 0.086이다. 직접법에 의하여 구조를 풀었으며 C-H 결합길이와 메틸기는 길이를 고정시켜 이상적인 기하학적 구조에 맞춰 cascade diagonal least-squares refinement에 의하여 정밀화하였다. 테트라시클로 고리는 정상적인 구조를 하고 있으나 에스텔과 곁사슬 부분은 열적효과에 의하여 정상적인 길이와 각도의 값에서 변화를 보이고 있으며 에스텔의 끝부분이 굽어져 치켜들고 있다. 분자는 비결합성 van der waals힘에 의하여 서로 쌓여져 있고 가장 짧은 분자간 거리는 3.529 $\AA$이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.157-159
• /
• 2010

대부분의 디지털 촬영 장치는 Charge Coupled Device(CCD) 또는 Complementary Metal Oxide Semiconductor(CMOS) 센서를 사용한다. 이러한 센서를 통해 촬영된 영상 정보에는 원하지 않는 잡음이 포함되어있다. 본 논문은 영상의 잡음 제거 및 영상 정보의 회복을 위한 기법인 잡음 제거(Noise Reduction, NR)에 관한 것이다. 제안한 NR 방법은 저역통과 필터(Low Pass Filter, LPF)의 대역폭을 고려한 잡음 제거 방법에 관한 것으로, NR의 성능개선을 위하여 MSF 연산에 사용되는 LPF의 필터 계수를 통한 시뮬레이션을 수행하였다. 필터 계수가 갖는 주파수 대역폭의 특성을 고려한 시뮬레이션 결과, MSF 연산에 적용되는 LPF와 고역통과 필터(High Pass Filter, HPF)의 필터 계수가 [1 2 1]과 [-1 2 -1]인 경우 가장 이상적인 주파수 대역폭을 나타내며, NR의 성능 또한 우수함을 확인하였다. 시뮬레이션 결과를 통하여, MSF를 수행함에 있어서 LPF와 HPF의 필터 계수를 [1 21]과 [-1 2 -1]로 제안하였다.