• Communications for Statistical Applications and Methods
• /
• v.3 no.3
• /
• pp.291-297
• /
• 1996

In this paper, we propose the jackknife estimator and the bootstrap estimator of Gini index of the two-parameter exponential distribution when the location parameter $\theta$ is unknown and the scale parameter $\sigma$is known. Sinilarly, we propose the bias location parameter $\theta$ and the scale parameter $\sigma$ are unknown. The bootstrap estimator is more efficient than the other estimators when the location parameter $\theta$is unknown and the scale parameter $\sigma$ is known, and the bias corrected estimator is more efficient than the MLE when both the location parameter $\theta$ and the scale parameter $\sigma$are unknown.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.3
• /
• pp.65-76
• /
• 1992

The superoxide dismutase (SOD)-mimetic activities of copper complexes of a series of salicylic acid (SA) analogs were tested and compared to the activity of bovine erythrocyte SOD using ferricytochrome c reduction assay. Stability constants of copper complexes were measured potentiometrically using SCOGS2 program. In the presence of 10 g/l albumin, all the copper complexes lost their SOD mimetic activities. Multiple regression analysis was employed for the statistical comparisons between the SOD mimetic activity and their physicochemical properties. Correlation exists for the SOD mimetic activity and steric parameter $(E_s)$ and/or electronic parameter $({\Sigma}{\sigma})$ in xanthine/xanthine oxidase (XOD) system, demonstrating that E, plays a key role in SOD activity whereas ${\Sigma}{\sigma}$ influences it to a lesser extent. The protective effect of copper complexes against membrane damage was measured by counting D-glucose released frm $EG_s$. D-glucose and XOD were entrapped within $EG_s$ and acetaldehyde was used as a substrate for XOD. In this membrane model system using $EG_s$, hydrophobic parameter $({\Sigma}{\pi})$ is of most importance, producing parabolic equation while $E_s$, and ${\Sigma}{\sigma}$ appear to playa minor role in protection against D-glucose release. In summary, to design an efficient SOD mimetic, stability, steric factor, lipophilicity and redox potential should be considered.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.2
• /
• pp.141-149
• /
• 1996

Lateral dispersion parameter(.sigma.$_{y}$) which is an important factor in atmospheric dispersion can be estimated byusing wind direction fluctuation(.sigma.$_{\theta}$). In this paper, we studied the characteristics of the .sigma.$_{\theta}$ in the Chunchon basin and calculated the .sig- ma.$_{y}$ by using the .sigma.$_{\theta}$. We could find some characteristics of the .sigma.$_{\theta}$ which showed small value, when the atmospheric condition was in weak unstable (C class) and neutral (D class). Moreover, when the atmospheric stability was neutral, there was no difference of .sigma.$_{\theta}$ with wind speed. On the other hand, .sigma.$_{\theta}$ showed large values at the strong unstable (A class) and strong stable (F class) condition with low wind speed. In this case, the .sigma.$_{\theta}$ increased as long as averaging time due to the long-period wind direction fluctuation by the terrain effect. In the result of calculation of .sigma.$_{y}$, it was smaller than that of pasquill-Gifford curve. Especially, when the atmospheric condition was in a neutral and stable, .sigma.$_{y}$ showed small increment as the downwind distance increased.creased.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.193-202
• /
• 2013

본 연구는 두개의 서로 다른 LJ 입자가 혼합된 계에 대하여 이들 사이의 LJ parameter 변화가 어떠한 영향을 미치는지 모의실험을 하였다. 조사 대상은 비활성 기체인 He과 Xe을 기준으로 하여 이들의 LJ parameter를 기준값으로부터 일정하게 변화시키며 열용량을 관찰하여 진행하였다. 분자간 상호작용만을 고려하여, 단원자 기체인 비활성 기체의 Lennard-Jones potential energy를 구하였다. Epsilon 값과 sigma 값을 바꿔 Lennard-Jones potential energy의 변화를 알아보고자 한다. 본 연구를 통해 sigma, epsilon 값이 클수록 Lennard-Jones potential energy가 커진다는 것을 알 수 있었다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.211-214
• /
• 2005

This research studied robust design of composite structure under combined loading of bending and torsion. DOE (Design of Experiment) technique was used to find important design factors. The results show that the beam height, beam width, layer thickness and stack angle of outer-layer are important design parameter. The $2^{nd}$ DOE and RSM (Response Surface Model) were conducted to obtain optimum design. Multi-island genetic algorithm was used to optimum design. An approximate value of 6.65 mm in deflection was expected under optimum condition. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the sigma level reliability, the standard deviation of design parameter should be controlled within 2.5 % of average design value.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.4
• /
• pp.622-628
• /
• 2002

Numerical analysis has been carried out for two-dimensional steady and unsteady mixed convection in the annulus between co-rotating horizontal cylinders with a heated inner cylinder. The ratio of annulus gap($\sigma$) is taken from 1 to 10 and the order of mixed-convection parameter B(=Gr/(1+Re)$^2$) varies from 10$^4$to $10^0$. The flow patterns over this parameter range are steady multicellular, oscillatory multicellular or steady unicellular. The addition of co-rotating of both cylinders stabilizes the flow in the annulus and weakens the unsteadiness. Even in the large values of rotating parameter such as of $10^0$/($\sigma$=2) and 10$^2$($\sigma$=10), the flow pattern becomes asymptotic to the steady unicellular flow, like as in the rigid-body rotating flow.

• Journal of Korea Foundry Society
• /
• v.29 no.4
• /
• pp.181-186
• /
• 2009

The interrelationship between new parameter ${\sigma}$ and maximum diameter $D_{max}$ is elaborated and discussed in comparison with four other glass forming ability (GFA) parameters, i.e. (1) super-cooled liquid region ${\Delta}T_x (=T_x - T_g)$, (2) reduced glass transition temperature $T_{rg} (=T_g/T_l)$, (3) K parameter $K (=[T_x-T_g]/[T_l -T_x])$, and (4) gamma parameter ${\gamma}(=[T_x]/[T_l+T_g])$ in Ca-based bulk metallic glass (BMG) systems. The ${\sigma}$ parameter, defined as ${\Delta}T^*{\times}P^'$, has a far better correlation with $D_{max}$ than the GFA parameters suggested so far, clearly indicating that the liquid phase stability and atomic size mismatch dominantly affect the GFA of Ca-based BMGs. Thus, it can be understood that the GFA of BMGs can be properly described by considering structural aspects for glass formation as well as thermodynamic and kinetic aspects for glass formation.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.275-280
• /
• 2011

This paper focuses on reliability prediction of long-term creep strength for Modified 9Cr-1Mo steel (Gr. 91) which is considered as one of the structural materials of next generation reactor systems. A "Z-parameter" method was introduced to describe the magnitude of standard deviation of creep rupture data to the master curve which can be plotted by log stress vs. The larson-Miller parameter (LMP). Statistical analysis showed that the scattering of the Z-parameter for the Gr. 91 steel well followed normal distribution. Using this normal distribution of the Z-parameter, the various reliability curves for creep strength design, such as stress-time temperature parameter reliability curves (${\sigma}$-TTP-R curves), stress-rupture time-reliability curves (${\sigma}-t_{r}-R$ curves), and allowable stress-temperature- reliability curves ([${\sigma}$]-T-R curves) were reasonably drawn, and their results are discussed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.388-394
• /
• 2005

This paper has the object of investigating natural frequencies of tapered thick plate on Pasternak foundation by means of finite element method and providing kinetic design data for mat of building structures. Vibration analysis for tapered thick plate subjected to in-plane stress is presented in this paper. Finite element analysis of rectangular plate is done by use of rectangular finite element with 8-nodes. Analysis conditions of tapered thick plate are as follows each. The ratio of in-plane stress to critical load is varied with $0.2\sigma_{cr}$, $0.4\sigma_{cr}$, $0.6\sigma_{cr}$. The Winkler parameter is 0, 10, 100, 1000, the shear foundation parameter is 0, 10 and the taper ratio is 0.0, 0.2, 0.4, 0.6, 0.8.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1296-1305
• /
• 2009

This paper has the object of investigating dynamic stability of stiffened tapered thick plate with concentrated mass on Pasternak foundation by means of finite element method and providing kinematic design data for mat of building structures. Finite element analysis of stiffened tapered thick plate is done by use of rectangular finite element with 8-nodes. In order to analysis plate which is supported on Pasternak foundation, the Winkler foundation parameter is varied with 10, 100, 1000 and the shear foundation parameter is 5, 10, concentrated mass is $0.25m_c$, $1.0m_c$, tapered ratio is 0.25, 0.5. The ratio of In-plane force to critical load is applied as $0.4\sigma_{cr},\;0.6\sigma_{cr},\;0.8\sigma_{cr}$ respectively. This paper analyzed varying tapered ratio.