• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.461-466
• /
• 2005

This paper presents a new speed control scheme of the spindle induction motor (IM) using fuzzy-logic control in fold weakening region. The implementation of the proposed FLC-based spindle IM are investigated and compared to those obtained from the conventional PI controller based drive system, we have confirmed good simulation and experimental results at different dynamic operating conditions such as sudden change in command speed, step change, etc.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.901-904
• /
• 1998

In this paper, we describes PID-neural network controller for the rotary inverted pendulum. PID control is applied to many fields but has some problems in nonlinear system due to a variation of parameter. So, we should desing the controller which is adjusted PI parameters by the neural network which is learned by backpropagation algorithm. And we show that on-line control is possible through the PID-neural network controller. The angle of the pendulum is controlled and then the position of the rotating arm is also controlled to maintain with in the set point. Measurement of the pendulum angle is obtained using a potentionmeter. The objective of the experiment is to design a PID-neural network control system that positions the arm as well as maintains the ivnerted pendulum vertical. Finally, we describe the actual experiment system and confirm the experimental results.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.95-97
• /
• 1997

This paper deals with design and implementation of the controller for optically guided AGV. When AGV has only three photo sensors in front of body, AGV doesn't know how much the entry angle to guide line is. In this case, it is difficult to compensate the tracking error. To make sure that the AGV does not secede the guide line in tracking, PI controller and fuzzy logic controller is proposed. The proposed controller was verified and experienced through real AGV system.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.149-151
• /
• 2001

This paper proposes the design of STATCOM(static synchronous compensator) stabilizer for improving power system stability using fuzzy logic controller(FLC). The STATCOM DC voltage regulator contributes negative damping to the power system as the installation of STATCOM DC voltage regulator. STATCOM stabiliser is superimposed on the AC voltage regulator to compensate the negative damping effect. To evaluate usefulness of the proposed method, we perform the nonlinear simulation on a single-machine infinite bus system. As results of the simulations, the proposed method shows better control performance than PI controller in terms of damping effects.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.1
• /
• pp.78-86
• /
• 2003

Multivariable control system exist widely in many types of systems such as chemical processes, biomedical processes, and the main steam temperature control system of the thermal power plant. Up to the present time, Pill Controllers have been used to operate these systems. However, it is very difficult to achieve an optimal PID gain with no experience, because of the interaction between loops and gain of the Pill controller has to be manually tuned by trial and error. This paper suggests a tuning method of the Pill Controller for the multivariable power plant using an immune algorithm, through computer simulation. Tuning results by immune algorithms based neural network are compared with the results of genetic algorithm.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.3
• /
• pp.311-315
• /
• 2004

Because of the characteristics of the cyber world, such as usefulness, anonymousness, patency, economic performance, rapidness, etc., cyber counseling has great possibility. Because he or she may not meet a consultant directly, a client can expose his/her inside problems or secret personal problems, keeping anonymousness. However, existing cyber counseling has the limit in durability of counseling because target counseling appropriate to a client is impossible and a counseling activity is done by one time counseling. In this paper, we attempt to develop a target cyber counseling system in which target cyber counseling is possible. The system will use a counseling assistance agent who can play the role of a counseling supporter as well as a counselor in the cyber space. If target counseling becomes possible, it can heighten efficiency of cyber counseling because a client is satisfied with the result of counseling and thus counseling activities can be continued.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.4
• /
• pp.277-281
• /
• 2006

Cyber counseling, one of the most compatible type of consultation for the information society, enables people to reveal their mental agonies and private problems anonymously, since it does not require face-to-face interview between a counsellor and a client. However, there are few cyber counseling centers which provide high quality and trustworthy service, although the number of cyber counseling center has highly increased. Therefore, this paper is intended to enable an appropriate consultation for each client by analyzing client propensity using Bayesian variable selection. Bayesian variable selection is superior to stepwise regression analysis method in finding out a regression model. Stepwise regression analysis method, which has been generally used to analyze individual propensity in linear regression model, is not efficient since it is hard to select a proper model for its own defects. In this paper, based on the case database of current cyber counseling centers in the web, we will analyze clients' propensities using Bayesian variable selection to enable individually target counseling and to activate cyber counseling programs.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2132-2134
• /
• 2001

We propose an Tabu search changing neighborhood solution's range to be searched each iteration according to an objective function. It is applied for designing the scaling factors of Fuzzy Logic Controller (FLC) using the proposed Tabu search. We apply it to the speed control of AC Servomotor to evaluate the usefulness of the proposed method. As a result of the computer simulation, the FLC shows the better performance than PI controller in terms of overshoot and settling time.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1034-1036
• /
• 1996

In this paper, an adaptive fuzzy logic controller is presented for auto-tunning of the scaling factors by using learning capability of neural networks. The proposed scheme consists of the FLC which includes the PI-type FLC and PD-type FLC in parallel form and the neural network which learns scale factors of FLC. Computer simulations were performed to illustrate the effectiveness of a proposed scheme. A proposed FLC controller was applied to the second order system and velocity control of the brushless DC motors. For the design of the FLC, tracking error, change of error, and acceleration error are selected as input variables of the FLC and three seal e factors were used in the parallel-type FLC. This scheme can be used to reduce the difficulty in the selection of the scale factors.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2316-2318
• /
• 2003

본 논문에서는 지게차용 12KW급 대전류 SR모터의 전류의 진상각 및 오프각 제어와 속도의 퍼지 제어에 대해 기술하였다. 대전류 SR모터의 경우는 전압이 낮은 대신 큰 전류가 흘러야 한다. 때문에 저 저항, 저 인덕턴스 형태로 설계된다. 따라서 토크가 유발되는 인덕턴스 상승구간에 원하는 크기의 전류를 얻기 위해서는 인덕턴스의 상승구간 이전에 적절히 스위칭 시켜 주어야 하는데 이를 진상각 제어라 하고, 역토크 구간 인 인덕턴스의 감소구간 이전에 스위칭 시켜주는 것을 오프각 제어라 한다. 이러한 내용을 실구동 실험을 통하여 얻은 토크 및 속도의 변화에 따른 진상각 및 오프각의 가변 데이터를 Look-up 테이블로 만들어 시뮬레이션을 통해 실험을 해본다. 또한 실험을 통한 데이터를 바탕으로 퍼지 제어기를 구성하여 시뮬레이션을 통해 PI 제어기와 비교 분석하여 본다.