• The Pure and Applied Mathematics
• /
• v.18 no.1
• /
• pp.13-29
• /
• 2011

In this paper, we introduce the new concept of ${\omega}-D^*$-distance on a $D^*$-metric space and prove a non-convex minimization theorem which improves the result of Caristi[1], ${\'{C}}iri{\'{c}}$[2], Ekeland[4], Kada et al.[5] and Ume[8, 9].

• Journal of the Korean Mathematical Society
• /
• v.34 no.3
• /
• pp.695-706
• /
• 1997

We investigate the bahivor of the gradient of solutions to the refraction equation $div(( 1+ (k - 1)_\chi D)\nabla u) = 0$ under perturbation of domain D. If $u_h$ are solutions to the refraction equation corresponding to subdomains D and $D_h$ of a domain $\Omega$ in 2 dimensional plane with the same Neumann data on $\partial\Omega$, respectively, we prove that $\left\$\mid$ \nabla(u - u_h) \right\$\mid$_{L^2(\Omega)} \leq C\sqrt{dist(D, D_h)}$ where $dist(D, D_h)$ is the Hausdorff distance between D and $D_h$. We also show that this is the best possible result.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.101-110
• /
• 2007

This study has designed a circular polarization antenna for UHF bandwidth RFID reader. As a result of performance test of the antenna designed it is found that return loss (S11) is about -45.529dB at 914MHz, which is relatively small, and antenna gain is about 6.09dBi. It has also been confirmed that $50{\Omega}$ impedance matching is about $50.48{$\Omega}$ and it can be applied to every RFID reader. Therefore, the antenna is designed to have higher gain of circular polarization by improving reception, which is one of the most important parameters of RFID reader and is expected to be extensively used to recognize multi-tag in the distance.

• Journal of the Korean Magnetic Resonance Society
• /
• v.3 no.1
• /
• pp.44-51
• /
• 1999

An enzyme derived conformational changes of cobalamine is thought to be important in the homolytic cleavage of Co-C bond which is the first step of catalytic Cl-cycle of coenzyme B12-dependent enzymes. Modern 2D-NMR and NMR-based distance geometric studies were carried out to determine the 3D structure of corrin ring. Homonuclear and heteronuclear correlation NMR experiments were performed for complete 1H-NMR signal assignments. Distances between numerous proton pairs were deduced based on the NOE cross peak intensities and subsequently used as input into the distance geometry program for the 3D structure determination. The detailed 3D structure from the present NMR-based analysis was compared with the result from X-ray crystallographic study, which revealed greater conformational changes occur in benzimidazole group and sugar ring than in macrocyclic corrin and tetrapyrrole. In addition, the distance geometry used in this study was found to be quite useful for NMR-based structure determination of medium-sized molecules that give poor NOE effects arising from their intermediate tumbling rate ($\omega$$\tau$c 1.0).

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.121-123
• /
• 2015

We report our measurements of the trigonometric distance and proper motion of IRAS 20056+3350, obtained from the annual parallax of $H_2O$ masers. Our distance of $D=4.69^{+0.65}_{-0.51}kpc$, which is 2.8 times larger than the near kinematic distance adopted in the literature, places IRAS 20056+3350 at the leading tip of the Local arm and proximal to the Solar circle. We estimated the proper motion of IRAS 20056+3350 to be (${\mu}_{\alpha}cos{\delta}$, ${\mu}_{\delta}$) = ($-2.62{\pm}0.33$, $-5.65{\pm}0.52$) $mas\;yr^{-1}$ from the group motion of $H_2O$ masers, and use our results to estimate the angular velocity of Galactic rotation at the Galactocentric distance of the Sun, ${\Omega}_0=29.75{\pm}2.29km\;s^{-1}kpc^{-1}$, which is consistent with the values obtained for other tangent points and Solar circle objects.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.401-408
• /
• 2005

Recently shield TBM tunnellings are being applied to subway construction in Korean cities. Generally these kinds of tunnellings have the problems in the stability of ground such as subsidence because urban subway is constructed in the shallow depth. A sinkhole occurred on the road just above the tunnel during tunneling in Kwangju, so a survey for upper layer of the tunnel was needed. But conventional Ground Probing Radar can't be applicable due to the presence of steel-mesh screen in the shield segment, so no existent geophysical method is applicable in this site. Because the outer surface of each shield segment is electrically insulated, dipole-dipole resistivity method which is popular in engineering site investigation, was tried to this survey for the first time. Specially manufactured flexible ring-type electrodes were installed into the grouting holes at an interval of 2.4 m on the ceiling. The K-Ohm II system which has been developed by KIGAM and tested successfully in many sites, was used in this site. The system consists of 1000Volt-1Ampere constant-current transmitter, optically isolated 24 bit sigma-delta A/D conversion receiver - maximum 12 channel simultaneous measurements, and graphical automatic acquisition software for easy data quality check in real time. Borehole camera logging with circular white LED lighting was also done to investigate the state of the layer. Measured resistivity data lack of some stations due to failing opening lids of holes, shows general high-low trend well. The dipole-dipole resistivity inversion results discriminate (1) one approximately 4 meter diameter cavity (grouted but incompletely hardened, so low resistivity - less than $30{\Omega}m$), (2) weak zone (100-200${\Omega}m$), and (3) hard zone (high resistivity - more than 1000${\Omega}m$) very well for the distance of 320 meters. The 2-D inversion neglects slight absolute 3-D effect, but we can get satisfactory and useful information. Acquired resistivity section and video tapes by borehole camera logging will be reserved and reused if some problem occurs in this site in the future.

• Journal of Environmental Science International
• /
• v.20 no.1
• /
• pp.25-34
• /
• 2011

The new empirical static model was constructed on the basis of dimension analysis to predict the pressure drop according to the operating conditions. The empirical static model consists of the initial pressure drop term (${\Delta}P_{initial}$) and the dust mass number term($N_{dust}=\frac{{\omega}_0{\nu}_f}{P_{pulse}t}$), and two parameters (dust deposit resistance and exponent of dust mass number) have been estimated from experimental data. The optimum injection distance was identified in the 64 experimental data at the fixed filtration velocity and pulse pressure. The dust deposit resistance ($K_d$), one of the empirical static model parameters got the minimum value at d=0.11m, at which the total pressure drop was minimized. The exponent of dust mass number was interpreted as the elasticity of pressure drop to the dust mass number. The elasticity of the unimodal behavior had also a maximum value at d=0.11m, at which the pressure drop increased most rapidly with the dust mass number. Additionally, the correlation coefficient for the new empirical static model was 0.914.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.409-416
• /
• 2003

We consider the problem of grouping orders into lots. The problem is modelled by a graph G = (V, E). where each node $\nu\;\in\;V$ denotes order specification and its weight $\omega(\nu)$ the orders on hand for the specification. We ran construct a lot simply from orders or single specification For a set of nodes (specifications) $\theta\;\subseteq\;V$, if the distance or any two nodes in $\theta$ is at most d, it is also possible to make a lot using orders on the nodes. The objective is to maximize the number of lots with size exactly $\lambda$. In this paper, we prove that our problem is NP-Complete when d = 2, $\lambda\;=\;3$ and each weight is 0 or 1. Moreover, it is also shown to be NP-Complete when d = 1, $\lambda\;=\;3$ and each weight is 1, 2 or 3

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.4
• /
• pp.253-258
• /
• 2003

We consider the problem of grouping orders into lots. The problem is modelled by a graph G=(V,E), where each node ${\nu}{\in}V$ denotes order specification and its weight ${\omega}(\nu)$ the orders on hand for the specification. We can construct a lot simply from orders of single specification. For a set of nodes (specifications) ${\theta}{\subseteq}V$, if the distance of any two nodes in $\theta$ is at most d, it is also possible to make a lot using orders on the nodes. The objective is to maximize the number of lots with size exactly $\lambda$. In this paper, we prove that our problem is NP-Complete when $d=2,{\lambda}=3$ and each weight is 0 or 1. Moreover, it is also shown to be NP-Complete when $d=1,{\lambda}=3$ and each weight is 1,2 or 3.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.51-56
• /
• 2002

Permalloy thin films fabricated by rf magnetron sputtering showed the excellent magnetic properties, i.e., an effective permeability of over 2000 at 1$\mu\textrm{m}$ thick up to 10 MHz, a saturation magnetization of 10∼12 kG, a coercive force of 0.2∼1 Oe, resistivity (p) is 20 ${\mu}$$\Omega$cm. In order to control the magnetic anisotropy direction of the films in a wafer scale, two parallel Nd-Fe-B permenant mangnets were used to provide the magnetic field during the sputtering process. As a result, the anisotropy direction was successfully controlled when the two magnets were seperated with a distance of 70 mm. 3D simmulation of the magnteic fields around the wafer during sputtering were in accord with the above result.