• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제18권1호
• /
• pp.13-29
• /
• 2011

In this paper, we introduce the new concept of ${\omega}-D^*$-distance on a $D^*$-metric space and prove a non-convex minimization theorem which improves the result of Caristi[1], ${\'{C}}iri{\'{c}}$[2], Ekeland[4], Kada et al.[5] and Ume[8, 9].

• 대한수학회지
• /
• 제34권3호
• /
• pp.695-706
• /
• 1997

We investigate the bahivor of the gradient of solutions to the refraction equation $div(( 1+ (k - 1)_\chi D)\nabla u) = 0$ under perturbation of domain D. If $u_h$ are solutions to the refraction equation corresponding to subdomains D and $D_h$ of a domain $\Omega$ in 2 dimensional plane with the same Neumann data on $\partial\Omega$, respectively, we prove that $\left\$\mid$ \nabla(u - u_h) \right\$\mid$_{L^2(\Omega)} \leq C\sqrt{dist(D, D_h)}$ where $dist(D, D_h)$ is the Hausdorff distance between D and $D_h$. We also show that this is the best possible result.

• 한국ITS학회 논문지
• /
• 제6권3호
• /
• pp.101-110
• /
• 2007

본 논문에서는 UHF대역의 RFID 리더기용 원형편파 안테나를 설계 제작하였다. 그리고 설계 제작된 안테나의 성능분석을 통하여 Return Loss (S11)는 914 MHz에서 약 -45.529 dB로 상당히 적었으며, 안테나 이득은 약 6.09 dBi값을 얻었다. 또한 임피던스 매칭은 약 $50.48\;{\Omega}$이고, 사용 대역 중심 주파수인 911 MHz에서 축비는 1.2 dB로 설계되어 모든 RFID 리더기에 적용 가능함을 확인하였다. 따라서 RFID 리더기의 파라미터에서 가장 중요한 것 중 하나는 수신감도를 향상시켜서 원거리에서도 멀티태그를 인식하는데 있어서 원형편파 안테나의 이득을 높게 설계 제작함으로써 감도를 향상 시킬 것으로 기대 된다.

• 한국자기공명학회논문지
• /
• 제3권1호
• /
• pp.44-51
• /
• 1999

An enzyme derived conformational changes of cobalamine is thought to be important in the homolytic cleavage of Co-C bond which is the first step of catalytic Cl-cycle of coenzyme B12-dependent enzymes. Modern 2D-NMR and NMR-based distance geometric studies were carried out to determine the 3D structure of corrin ring. Homonuclear and heteronuclear correlation NMR experiments were performed for complete 1H-NMR signal assignments. Distances between numerous proton pairs were deduced based on the NOE cross peak intensities and subsequently used as input into the distance geometry program for the 3D structure determination. The detailed 3D structure from the present NMR-based analysis was compared with the result from X-ray crystallographic study, which revealed greater conformational changes occur in benzimidazole group and sugar ring than in macrocyclic corrin and tetrapyrrole. In addition, the distance geometry used in this study was found to be quite useful for NMR-based structure determination of medium-sized molecules that give poor NOE effects arising from their intermediate tumbling rate ($\omega$$\tau$c 1.0).

• 천문학논총
• /
• 제30권2호
• /
• pp.121-123
• /
• 2015

We report our measurements of the trigonometric distance and proper motion of IRAS 20056+3350, obtained from the annual parallax of $H_2O$ masers. Our distance of $D=4.69^{+0.65}_{-0.51}kpc$, which is 2.8 times larger than the near kinematic distance adopted in the literature, places IRAS 20056+3350 at the leading tip of the Local arm and proximal to the Solar circle. We estimated the proper motion of IRAS 20056+3350 to be (${\mu}_{\alpha}cos{\delta}$, ${\mu}_{\delta}$) = ($-2.62{\pm}0.33$, $-5.65{\pm}0.52$) $mas\;yr^{-1}$ from the group motion of $H_2O$ masers, and use our results to estimate the angular velocity of Galactic rotation at the Galactocentric distance of the Sun, ${\Omega}_0=29.75{\pm}2.29km\;s^{-1}kpc^{-1}$, which is consistent with the values obtained for other tangent points and Solar circle objects.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.401-408
• /
• 2005

Recently shield TBM tunnellings are being applied to subway construction in Korean cities. Generally these kinds of tunnellings have the problems in the stability of ground such as subsidence because urban subway is constructed in the shallow depth. A sinkhole occurred on the road just above the tunnel during tunneling in Kwangju, so a survey for upper layer of the tunnel was needed. But conventional Ground Probing Radar can't be applicable due to the presence of steel-mesh screen in the shield segment, so no existent geophysical method is applicable in this site. Because the outer surface of each shield segment is electrically insulated, dipole-dipole resistivity method which is popular in engineering site investigation, was tried to this survey for the first time. Specially manufactured flexible ring-type electrodes were installed into the grouting holes at an interval of 2.4 m on the ceiling. The K-Ohm II system which has been developed by KIGAM and tested successfully in many sites, was used in this site. The system consists of 1000Volt-1Ampere constant-current transmitter, optically isolated 24 bit sigma-delta A/D conversion receiver - maximum 12 channel simultaneous measurements, and graphical automatic acquisition software for easy data quality check in real time. Borehole camera logging with circular white LED lighting was also done to investigate the state of the layer. Measured resistivity data lack of some stations due to failing opening lids of holes, shows general high-low trend well. The dipole-dipole resistivity inversion results discriminate (1) one approximately 4 meter diameter cavity (grouted but incompletely hardened, so low resistivity - less than $30{\Omega}m$), (2) weak zone (100-200${\Omega}m$), and (3) hard zone (high resistivity - more than 1000${\Omega}m$) very well for the distance of 320 meters. The 2-D inversion neglects slight absolute 3-D effect, but we can get satisfactory and useful information. Acquired resistivity section and video tapes by borehole camera logging will be reserved and reused if some problem occurs in this site in the future.

• 한국환경과학회지
• /
• 제20권1호
• /
• pp.25-34
• /
• 2011

The new empirical static model was constructed on the basis of dimension analysis to predict the pressure drop according to the operating conditions. The empirical static model consists of the initial pressure drop term (${\Delta}P_{initial}$) and the dust mass number term($N_{dust}=\frac{{\omega}_0{\nu}_f}{P_{pulse}t}$), and two parameters (dust deposit resistance and exponent of dust mass number) have been estimated from experimental data. The optimum injection distance was identified in the 64 experimental data at the fixed filtration velocity and pulse pressure. The dust deposit resistance ($K_d$), one of the empirical static model parameters got the minimum value at d=0.11m, at which the total pressure drop was minimized. The exponent of dust mass number was interpreted as the elasticity of pressure drop to the dust mass number. The elasticity of the unimodal behavior had also a maximum value at d=0.11m, at which the pressure drop increased most rapidly with the dust mass number. Additionally, the correlation coefficient for the new empirical static model was 0.914.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.409-416
• /
• 2003

We consider the problem of grouping orders into lots. The problem is modelled by a graph G = (V, E). where each node $\nu\;\in\;V$ denotes order specification and its weight $\omega(\nu)$ the orders on hand for the specification. We ran construct a lot simply from orders or single specification For a set of nodes (specifications) $\theta\;\subseteq\;V$, if the distance or any two nodes in $\theta$ is at most d, it is also possible to make a lot using orders on the nodes. The objective is to maximize the number of lots with size exactly $\lambda$. In this paper, we prove that our problem is NP-Complete when d = 2, $\lambda\;=\;3$ and each weight is 0 or 1. Moreover, it is also shown to be NP-Complete when d = 1, $\lambda\;=\;3$ and each weight is 1, 2 or 3

• 대한산업공학회지
• /
• 제29권4호
• /
• pp.253-258
• /
• 2003

We consider the problem of grouping orders into lots. The problem is modelled by a graph G=(V,E), where each node ${\nu}{\in}V$ denotes order specification and its weight ${\omega}(\nu)$ the orders on hand for the specification. We can construct a lot simply from orders of single specification. For a set of nodes (specifications) ${\theta}{\subseteq}V$, if the distance of any two nodes in $\theta$ is at most d, it is also possible to make a lot using orders on the nodes. The objective is to maximize the number of lots with size exactly $\lambda$. In this paper, we prove that our problem is NP-Complete when $d=2,{\lambda}=3$ and each weight is 0 or 1. Moreover, it is also shown to be NP-Complete when $d=1,{\lambda}=3$ and each weight is 1,2 or 3.

• 한국자기학회지
• /
• 제12권2호
• /
• pp.51-56
• /
• 2002

마그네트론 스퍼터링을 이용하여 퍼멀로이 박막의 제조시 요구되는 자기이방성 조절을 위하여 필요한 조건을 NdFeB자석과 3-D전산모사를 이용하여 평가하였으며, 또한 같은 조건에서 제조된 박막의 특성을 조사하였다. 타겟과 기판과의 거리가 5cm인 경우 타겟 자석과 자기이방성 조절을 위하여 장입된 영구자석의 상호 작용에 의하여 기판에 평행한 자속을 얻기 위한 조건이 전산모사 결과 영구자석간의 거리 변화에 매우 민감하였으며, 최적의 조건의 두 영구자석의 간격이 70mm에서 가장 균질한 자속을 대면적에서 얻을 수 있음이 확인되었다. 투입전력 450 W에서 기판에 장착시킨 NdFeB 자석간 거리(48, 60, 70, 80, 85mm) 를 변화시킨 결과 포화자화 값은 10~12 kG, 보자력은 0.2~1 Oe, 비저항은 20 $\mu$$\Omega$cm의 값을 갖는 퍼멀로이가 제조되었으며, 자기적 이방성은 전산모사의 결과와 일치하였다. 그 결과 자석간의 간격이 70mm에서 제조된 두께 1 $\mu$m 퍼말로이의 유효투자율이 10 MHz에서 2500을 유지하는 결과를 얻었다.