• 제목/요약/키워드: ${\mu}$-GA

검색결과 945건 처리시간 0.031초

The Electronic Structures and Magnetism of Monolayer Fe on CuGaSe2(001)

  • Jin, Ying-Jiu;Lee, Jae-Il
    • Journal of Magnetics
    • /
    • 제12권2호
    • /
    • pp.59-63
    • /
    • 2007
  • Ferromagnet/Semiconductor heterostructures have attracted much attention because of their potential applications in spintronic devices. We investigated the electronic structures and magnetism of monolayer Fe on $CuGaSe_2(001)$ by using the all-electron full-potential linearized augmented plane-wave method within a generalized gradient approximation. We considered the monolayer Fe deposited on both the CuGa atoms terminated (CuGa-Term) and the Se atom terminated (Se-Term) surfaces of $CuGaSe_2(001)$. The calculated magnetic moment of the Fe atom on the CuGa-Term was about $2.90\;{{\mu}_B}$. Those of the Fe atoms on the Se-Term were in the range of $2.85-2.98\;{{\mu}_B}$. The different magnetic behaviors of the Fe atoms on two different surfaces were discussed using the calculated layer-projected density of states.

고내압 전력 스위칭용 AlGaN/GaN-on-Si HEMT의 게이트 전계판 구조 최적화에 대한 이차원 시뮬레이션 연구 (Two-dimensional Simulation Study on Optimization of Gate Field Plate Structure for High Breakdown Voltage AlGaN/GaN-on-Si High Electron Mobility Transistors)

  • 이호중;조준형;차호영
    • 대한전자공학회논문지SD
    • /
    • 제48권12호
    • /
    • pp.8-14
    • /
    • 2011
  • 본 논문에서는 이차원 소자 시뮬레이션을 활용하여 주어진 게이트-드레인 간격에서 AlGaN/GaN-on-Si HEMT (high electron mobility transistor) 의 고항복전압 구현을 위한 게이트 전계판의 최적화 구조를 제안하였다. 게이트 전계판 구조를 도입하여 게이트 모서리의 전계를 감소시켜 항복전압을 크게 증가시킬 수 있음을 확인 하였으며, 이때 전계판의 길이와 절연막의 두께에 따라 게이트 모서리와 전계판 끝단에서 전계분포의 변화를 분석하였다. 최적화를 위하여 시뮬레이션을 수행한 결과, 1 ${\mu}m$ 정도의 짧은 게이트 전계판으로도 효과적으로 게이트 모서리의 전계를 감소시킬 수 있으며 전계판의 길이가 너무 길어지면 전계판과 드레인 사이의 남은 길이가 일정 수준 이하로 감소되어 오히려 항복전압이 급격하게 감소함을 보였다. 전 계판의 길이가 1 ${\mu}m$ 일 때 최대 항복전압을 얻었으며, 게이트 전계판의 길이를 1 ${\mu}m$로 고정하고 $SiN_x$ 박막의 두께를 변화시켜본 결과 게이트 모서리와 전계판 끝단에서의 전계가 균형을 이루면서 항복전압을 최대로 할 수 있는 최적의 $SiN_x$ 박막 두께는 200~300 nm 인 것으로 나타났다.

강낭콩미숙종자로부터 Gibberellin $3Beta$-Hydroxylase 정제 및 성질 (Purification and Characterization of Gibberellin $3Beta$-Hydroxylase from Immature Seeds of Phaseolus vulgaris)

  • 곽상수
    • 한국식물학회:학술대회논문집
    • /
    • 한국식물학회 1987년도 식물생명공학 심포지움 논문집 Proceedings of Symposia on Plant Biotechnology
    • /
    • pp.133-148
    • /
    • 1987
  • Gibberellin(GA) 3-$\beta$ hydroxylation is very important for the shoot elogation in the higher plants, since only 3$\beta$-hydryoxylated GAs promote shoot elogation in several plants. Fluctuation of 3$\beta$-hydryoxylase activity was examined during seed maturation using two cultivars of , P. vulgaris, Kentucky Wonder (normal) and Masterpiece (dwarf). Very immature seeds of both cultivars contain high level of 3$\beta$-hydroxylase activity (per mg protein). Both cultivars showed maximum of enzyme activity (per seed) in the middle of their maturation process. Gibberellin 3$\beta$-hydroxylase catalyzing the hydroxylation of GA20 to GA1 was purified 313-fold from very early immature seeds of P. vulgaris. Crude soluble enzyme extracts were purified by 15% methanol precipitation, hydrophobic interaction chromatogrphy, DEAE ion exchange column chromatography and gel filtration HPLC. The 3$\beta$-hydroxylase activity was unstable and lost much of its activity duting the purification. The molecular weight of purified enzyme was extimated to be 42, 000 by gel filtration HPLC and SDS-PAGE. The enzyme exhibited maximum activity at pH 7.7. The Km values for [2.3-3H] GA20 and [2.3-3H]GA9 were 0.29 $\mu$M and 0.33 $\mu$M, respectively. The enzyme requires 2-oxoglutarate as a cosubstrate; the Km value for 2-oxoglutarate was 250 $\mu$M using 3H GA20 as a substrate. Fe2+ and ascorbate significantly activated the enzyme at all purification steps, while catalase and BSA activated the purified enzyme only. The enzyme was inhibited by divalent cations Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+ and Hg2+. Effects of several GAs and GA anaogues on the putrified 3$\beta$-hydroxylase were examined using [3H]GA9 and GA20 as a substrates. Among them, GA5, GA9, GA15, GA20 and GA44 inhibited the enzyme activity. [13C, 3H] GA20 was converted by the partially purified enzyme preparation to [13C, 3H]GA1, GA5 and GA6, which were identified by GC-MS, GA9 was converted only GA4, GA15 and GA44 were converted to GA37 and GA38, respectively. GA5 was epoxidized to GA6 by the preparation. This suggests that 3$\beta$-hydroxylation of GA20 and epoxidation of GA5 are catalyzed by the same enzyme in P, vulgaris.

  • PDF

저압 유기금속 기상화학증착법에 의한 1.3$\mu$m InGaAsP/InP uncooled-LD의 제작 (Fabrication of 1.3$\mu$m InGaAsP/InP uncooled-LD using low pressure MOVPE)

  • 조호성;김정수;이중기;장동훈;박경현;이승원;박기성;김홍만;박형무
    • 전자공학회논문지A
    • /
    • 제32A권6호
    • /
    • pp.75-81
    • /
    • 1995
  • InGaAsP/InP uncooled LDs emitting at 1.3$\mu$m wavelength are of interest for several application of fiber-to-the-home, optical interconnection, long-haul high-bit-rate optical transmission systems, etc. The strain compensated PBH-MQW-LD employing 1.4% compressive strained well (${\lambda}=1.3{\mu}m$) and 0.7% tensile strained barrier (${\lambda}=1.12{\mu}m$) layers grown by low pressure metallicorganic vapor phase epitaxy was found to be low threshold current and stable temperature characteristics. The average threshold current of 5.6mA and average slope efficiency of 0.27mW/mA at room temperature were obtained for uncoated uncooled-LD.

  • PDF

열 산화공정을 이용하여 제작된 고전압 GaN 쇼트키 장벽 다이오드 (High-Voltage GaN Schottky Barrier Diode on Si Substrate Using Thermal Oxidation)

  • 하민우;노정현;최홍구;송홍주;이준호;김영실;한민구;한철구
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1418-1419
    • /
    • 2011
  • 차세대 전력 반도체인 고전압 GaN 쇼트키 장벽 다이오드의 역방향 특성을 개선하기 위해서 열 산화공정이 제안되었다. AlGaN/GaN 에피탁시 위에 쇼트키 장벽 다이오드 구조가 제작되었으며, 쇼트키 컨택은 증착 후 $450^{\circ}C$에서 산화되었다. 열 산화공정이 메사 측벽의 AlGaN 및 GaN 표면에 $AlO_x$$GaO_x$를 형성하여 표면으로 흐르는 누설전류를 억제한다. 표면 및 GaN 버퍼를 통한 누설전류는 열 산화 공정 이후 100 ${\mu}m$-너비당 51.3 nA에서 24.9 pA로 1/2000 배 수준으로 감소하였다. 표면 산화물 형성으로 인하여 생성된 Ga-vacancy와 Al-vacancy는 acceptor로 동작하여 surface band bending을 증가시켜 쇼트키 장벽 높이를 증가시킨다. 애노드-캐소드 간격이 5 ${\mu}m$인 제작된 소자는 0.99 eV의 높은 쇼트키 장벽 높이를 획득하여, -100 V에서 0.002 A/$cm^2$의 낮은 누설전류를 확보하였다. 애노드-캐소드 간격이 5에서 10, 20, 50 ${\mu}m$로 증가되면 소자의 항복전압은 348 V에서 396, 606, 941 V로 증가되었다. 열 산화공정은 전력용 GaN 전자소자의 누설전류감소와 항복전압 증가를 위한 후처리 공정으로 적합하다.

  • PDF

ECR 플라즈마와 습식 식각으로 게이트 리세스한 AlGaAs/InGaAs/GaAs PHEMT 소자의 전기적 특성연구 (A Study of Electrical Properties for AlGaAs/InGaAs/GaAs PHEMT s Recessed by ECR Plasma and Wet Etching)

  • 이철욱;배인호;최현태;이진희;윤형섭;박병선;박철순
    • 한국전기전자재료학회논문지
    • /
    • 제11권5호
    • /
    • pp.365-370
    • /
    • 1998
  • We studied a electrical properties in GaAs/AlGaAs/InGaAs pseudomorphic high electron mobility transistors(PHEMT s) recessed by electron cyclotron resonance(ECR) plasma and wet etching. Using the $NH_4OH$ solution, a nonvolatile AlF$_3$layer formed on AlGaAs surface after selective gate recess is effectively eliminated. Also, we controlled threshold voltage($V_th$) using $H_3PO_4$ etchant. We have fabricated a device with 540 mS/mm maximum transconductance and -0.2 V threshold voltage by using $NH_4OH$ and $H_3PO_4$dip after ECR gate recessing. In a 2-finger GaAs PHEMT with a gate length of 0.2$\mu m$ and width of 100 $\mu m$, a current gain of 15 dB at 10 GHz and a maximum cutoff frequency of 58.9 GHz have been obtained from the measurement of current gain as a function of frequency at 12mA $I_{dss}$ and 2 V souce-drain voltage.

  • PDF

RUO$_2$/GaN 쇼트키 다이오드 형 자외선 수광소자 (A Schottky Type Ultraviolet Photo-detector using RUO$_2$/GaN Contact)

  • 신상훈;정병권;배성범;이용현;이정희;함성호
    • 대한전자공학회논문지SD
    • /
    • 제38권10호
    • /
    • pp.671-677
    • /
    • 2001
  • 사파이어 기판 위에 성장된 GaN위에 RUO₂/GaN 쇼트키형 자외선 수광소자를 설계, 제작하였다. 자외선 빛의 흡수율을 높이기 위해, MOCVD 다층구조는 undoped GaN(0.5 ㎛)in ̄-GaN(0.1 ㎛)/n+-GaN(1.5 ㎛)로 성장하였다. 성장층은 3.8×10/sup 18/ cm ̄³의 캐리어 농도와 283 ㎠/V· s의 이동도를 가진다. 500 ㎛내외의 직경을 가지는 메사구조를 형성하기 위해 ECR 식각한 후, n+-GaN층위에 Al으로 저항성 접촉을 하였다. 저항성 및 쇼트키 접촉 사이에 Si₃/N₄ 박막으로 절연한 이후 undoped GaN 층위에 RuO₂ 쇼트키 접촉을 하였다. 제작된 쇼트키 다이오드는 1.15×10/sup -5/ [Ω-㎠]의 접촉비저항을 가졌다. 제작된 다이오드는 역전압인 -5V에서 305pA의 낮은 누설전류를 확인하였는데, 이 값은 RuO₂ 쇼트키 금속증착에 의해 현저히 향상된 것이다. 광측정에서는 10/sup 5/의 자외선대가시광선 제거비와 365nm 파장에서 0.23A/W로 높은 응답도를 보인다.

  • PDF

반극성 (11-22)n형 GaN의 실리콘 도핑농도 증가에 따른 결함감소와 이에 따른 반극성(11-22) GaN계 LED소자의 특성향상에 대한 연구

  • 이재환;한상현;송기룡;이성남
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.308.2-308.2
    • /
    • 2014
  • 최근 III-N계 물질 기반의 광 반도체 중 m-면 사파이어 기판을 사용하여 반극성 (11-22) GaN박막을 성장하는 광반도체의 발광효율을 높이려는 연구가 많이 진행되고 있다. 하지만, 반극성 (11-22) GaN와 m-면 사파이어 기판과의 큰 격자상수 차이와 결정학적 이방성의 차이에 의해 많은 결정 결함이 발생하게 된다. 이러한 결정결함들은 반극성 LED소자내에서 누설전류 및 비발광 재결합, 순방향전압 등의 소자특성을 저하시키는 큰 요인이 되기 때문에 고효율 발광소자를 제작함에 있어 어려움을 야기시킨다. 이러한, 반극성 LED 소자의 효율 향상을 위해 결함 분석에 대한 연구를 주를 이루고 있는 상황으로, n-GaN층에 Si도핑에 관한 연구가 진행되고 있다. 이미 극성과 비극성에서는 n-GaN층에 Si이 도핑이 증가될수록 결정질이 향상되고, 양자우물의 계면의 질도 향상 되었다는 보고가 있다. 본 연구에서는 반극성 (11-22) GaN 기반의 발광소자를 제작함에 있어 n-GaN 층의 도핑 농도 변화를 통한 반극성 GaN 박막의 결정성 및 전기적 특성 변화에 따른 LED소자의 전계 발광 특성에 대한 연구를 진행하였다. 금속유기화학증착법을 이용하여 m-면 사파이어 기판에 $2.0{\mu}m$두께의 반극성 (11-22) GaN 박막을 저온 GaN완충층이 존재하지 않는 고온 1단계 성장법을 기반으로 성장하였다.[3] 이후, $2.0{\mu}m$ 반극성 (11-22) GaN 박막 위에 $3.5{\mu}m$ 두께의 n-GaN 층을 성장시켰다. 이때, n-형 도펀트로 SiH4 가스를 4.9, 9.8, 19.6, 39.2 sccm으로 변화하여 성장하였다. 이 4가지 반극성 (11-22) n-GaN 템플릿을 이용하여 동일 구조의 InGaN/GaN 다중양자우물구조와 p-GaN을 성장하여 LED 구조를 제작하였다. X-선 ${\omega}$-rocking curve를 분석한 결과, 이러한 특성은 반극성 (11-22) n-GaN층의 Si 도핑농도 증가에 따라서 각 (0002), (11-20), (10-10) 면에서 결정 결함이 감소하고, 반극성 (11-22) n형 GaN템플릿을 이용하여 성장된 반극성 GaN계 LED소자는 20mA인가 시 도핑 농도 증가에 따라 9.2 V에서 5.8 V로 전압이 감소하였으며 역방향 전류에서도 누설전류가 감소함이 확인되었다. 또한, 전계 발광세기도 증가하였는데, 이는 반극성 n형 GaN박막의 실리콘 도핑농도 증가에 따라 하부 GaN층의 결정성이 향상과 더불어 광학적 특성이 향상되고, n형 GaN층의 전자 농도 및 이동도의 동시 증가에 따라 전기적 특성이 향상 됨에 따라 LED소자의 전계 발광 특성이 향상된 것으로 판단된다.

  • PDF

MgO/GaN MOSFETs의 dc 특성 및 Gate Breakdown 특성 Simulation (Simulation of do Performance and Gate Breakdown Characteristics of MgO/GaN MOSFETs)

  • 조현;김진곤
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.176-176
    • /
    • 2003
  • The effects of oxide thickness and gate length of MgO/GaN metal oxide semiconductor field effect transistors (MOSFETs) on I-V, threshold voltage and breakdown voltage characteristics were examined using a drift-diffusion model. The saturation drain current scales in an inverse logarithmic fashion with MgO thickness and is < 10$^{-3}$ A.${\mu}{\textrm}{m}$$^{-1}$ for 0.5 ${\mu}{\textrm}{m}$ gate length devices with oxide thickness > 600 $\AA$ or for all 1 ${\mu}{\textrm}{m}$ gate length MOSFETs with oxide thickness in the range of >200 $\AA$. Gate breakdown voltage is > 100 V for gate length >0.5 ${\mu}{\textrm}{m}$ and MgO thickness > 600 $\AA$. The threshold voltage scales linearly with oxide thickness and is < 2 V for oxide thickness < 800 $\AA$ and gate lengths < 0.6 ${\mu}{\textrm}{m}$. The GaN MOSFET shows excellent potential for elevated temperature, high speed applications.

  • PDF

$Ga_2O_3$ 첨가에 따른 다성분계 glass optical fiber의 특성 (Properties of Multicomponent Glass Optical Fiber by adding $Ga_2O_3$)

  • 윤상하;강원호
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제10권3호
    • /
    • pp.210-216
    • /
    • 1997
  • The th ermal and optical properties of multicomponent oxide glass optical fiber by adding heavy metal oxide Ga$_{2}$O$_{3}$(0-20wt%) were investigated. The fiber samples were made by the method of rod in tube. The optical loss of fiber was measured in 0.3-1.8.mu.m wavelength region. As Ga$_{2}$O$_{3}$ increased up to 20wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 579.deg. C and from 548.deg. C to 641.deg. C, respectively. Whereas the thermal expansion coefficient was decreased from 102 to 79.1x10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.665, and IR cut-off wavelength was enlarged from 4.64.mu.m to 6.1.mu.m. The optical loss of fiber was remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.

  • PDF