• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.13-16
• /
• 2000

A quantum-wire field effect transistor(QW-FET) using asymmetric double InGaAs channel and Si-delta doped barrier has been fabricated. It exhibited good modulation and saturation characteristic in the range of ${\mu}\textrm{A}$ current level. For estimated channel width of 150nm QW-FET, maximum transconductance was about 400 mS/mm which is higher than a conventional heterostructure FET(HFET) with the same epi-structure.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1047-1052
• /
• 1996

In this study, the thermal and optical proper-ties of multicomponent oxide glass fiber for IR sensor by adding heavy metal oxide Ga$_{2}$O$_{3}$ were investigated. The fiber samples were made by rod-in tube method. The optical loss of fiber was measured in 0.3-1.8/M wavelength region. As Ga$_{2}$O$_{3}$ increased up to 12wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 564.deg. C and from 548.deg. C to 612.deg. C respectively. Whereas the thermal expansion coefficient was decreased from 102 to 88.2*10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.662, and IR cut-off wavelength was enlarged from 4.64.mu.m to 5.22.mu.m. The optical loss of fiber was decreased and more remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.477-478
• /
• 2006

Characteristics of InAs/GaAs quantum dot (QD) ridge laser diodes (LDs) are investigated for high-power $1.3\;{\mu}m$ applications. For QD ridge LDs with a $5-{\mu}m$-wide stripe and a 1-mm-long cavity, the emission wavelength of 1284.1 nm, the single-uncoated-facet CW output power as high as 90 mW, the external efficiency of 0.31 W/A and the threshold current density of $800\;mA/cm^2$ are obtained. The linewidth enhancement factor ($\alpha$-factor) is successfully measured to be between 0.4 and 0.6, which are about four times as small values with respect to conventional quantum well structure. It is possible that this result significantly reduce the filamentation of far-field profiles resulting in better beam quality for high power operation.

• Journal of Ship and Ocean Technology
• /
• v.9 no.4
• /
• pp.35-46
• /
• 2005

The performance of optimisation methods, based on penalty functions, is highly problem- dependent and many methods require additional tuning of some variables. This additional tuning is the influences of penalty coefficient, which depend strongly on the degree of constraint violation. Moreover, Binary-coded Genetic Algorithm (BGA) meets certain difficulties when dealing with continuous and/or discrete search spaces with large dimensions. With the above reasons, Real-coded Micro-Genetic Algorithm (R$\mu$GA) is proposed to find the global optimum of continuous and/or discrete nonlinear constrained engineering problems without handling any of penalty functions. R$\mu$GA can help in avoiding the premature convergence and search for global solution-spaces, because of its wide spread applicability, global perspective and inherent parallelism. The proposed R$\mu$GA approach has been demonstrated by solving three different engineering design problems. From the simulation results, it has been concluded that R$\mu$GA is an effective global optimisation tool for solving continuous and/or discrete nonlinear constrained real­world optimisation problems.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.6
• /
• pp.500-504
• /
• 2001

The present approach based on the genetic algorithm with improved selections of bonds was adopted to extract a bridged T equivalent circuit elements of $\times10\mu m^2$InGaP/GaAs HBT. the small-signal model parameters were extracted using the genetic algorithm from S-parameters measured at different frequencies under multiple forward-active biases, which demonstrate physically meaningful values and consistency. The agreement between the measured and modeled S-parameters is excellent over the frequency range of 2 to 26.5GHz.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1157-1162
• /
• 2013

We proposed AlGaN/GaN high-electron-mobility transistors (HEMTs) using thermal oxidation for NiOx passivation. Auger electron spectroscopy, secondary ion mass spectroscopy, and pulsed I-V were used to study oxidation features. The oxidation process diffused Ni and O into the AlGaN barrier and formed NiOx on the surface. The breakdown voltage of the proposed device was 1520 V while that of the conventional device was 300 V. The gate leakage current of the proposed device was 3.5 ${\mu}A/mm$ and that of the conventional device was 1116.7 ${\mu}A/mm$. The conventional device exhibited similar current in the gate-and-drain-pulsed I-V and its drain-pulsed counterpart. The gate-and-drain-pulsed current of the proposed device was about 56 % of the drain-pulsed current. This indicated that the oxidation process may form deep states having a low emission current, which then suppresses the leakage current. Our results suggest that the proposed process is suitable for achieving high breakdown voltages in the GaN-based devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.78-79
• /
• 2009

본 연구에서는 ZnO계 투명전극 소재를 이용하여 RFID 태그 안테나에 적용 가능성 여부를 확인하였다. Si 기판위에 RF 스퍼터링 공정에 의해 Ga-doped ZnO 투명 마이크로스트립 스파이혈 안테나를 $2{\mu}m$를 증착하여 구현하고 그 전기적 특성을 측정하였다. HFSS 전자계 시뮬레이터를 사용하여 13.56MHz HF 주파수 대역에서 태그 안테나로서의 가능성을 검증한 후 Ga-doped ZnO 타겟을 사용한 RF 스퍼터링 공정에 의하여 스파이럴 안테나 패턴을 구현하였다. 마이크로스트립 선폭 및 선 간격을 $50\sim200{\mu}m$때 영역에서 조절하면서 안테나 패턴을 설계하였다. S 파라메터, 자기공진주파수 및 Q값을 시뮬레이션으로부터 도출하였다. Al $2{\mu}m$ 증착한 시편에 비하여 약 -10dB 정도의 이득저하가 발생하였으나 리더-태그를 밀착시킨 조건에서 1.7V (13.56MHz) 전압검출이 가능하였다.

• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.38-44
• /
• 1998

RF 스퍼터링법으로 (001)Si 기판위에 AIN완충층을 성장하고, 그 위에 HVPE법으로 GaN를 성장하였다. GaN의 성장률은 103$0^{\circ}C$의 온도에서 AIN완충충의 두께가 각각 500$\AA$과 2000$\AA$ 일때 65$\mu\textrm{m}$/hr와 84$\mu\textrm{m}$/hr로서 AIN완충층의 두께가 증가함에 따라 증가하였다. AIN완충층위에서 GaN의 성장초기에는 수 $\mu\textrm{m}$크기의 결정들이 임의의 방향으로 성장된 후 성장시간이 경과함에 따라 수평방향으로의 성장에 의하여 합쳐지게 되며, c-축 방향으로 배향된 평탄한 표면을 갖는 다결정체가 성장되었다. 20K의 온도에서 측정된 광루미네센스(PL)스펙트럼에서는 3.482eV에서 자유여지자에 의한 발광과 3.7472eV에서 반치폭이 9.6meV인 도너 구속여기자 발광 및 3.27eV 부근에서의 도너-억셉터 쌍 사이의 재결합과 LO포는 복제에 의한 발광이 나타났다. 그러나 2.2eV부근에서의 황색발광은 관찰되지 않았다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1073-1076
• /
• 2003

This paper shows the performance as a photodetector of InP/InGaAs HPT operated with a base bias and forntside optical injection through the emitter. InP/InGaAs HPT produced the high optical gain of about 16.2 where HPT is biased at Vc=1V, I$_{B}$=20$\mu$A with an input optical power of 2.4$\mu$W. And we examined that the optical gain of HPTs becomes larger when operating in 3-terminal configuration rather than 2-terminal with the floating base. The optical performance of InP/InGaAs HPT is an attractive to the PIN Photodetector for use in long wavelength optical receivers.s.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.8-9
• /
• 2000

최근 광통신 분야의 발전을 바탕으로 경제적이고 간편한 밀리미터파의 발생, 변조 및 검파를 위한 밀리미터파-Photonics 기술연구가 활발히 진행되고 있다. 이러한 밀리미터파-Photonics 시스템을 구현하기 위해서 필요한 중심 부품중에 하나가 고출력, 광대역 광 검출기이다. 이러한 요구조건을 만족시키는 광 검출기로서 VMDP(Velocity Matched Distributed Photodetector)는 기존의 광 검출기 구조에 비해 월등한 성능을 나타내고 있다. 기존에 AlGaAs/GaAs를 이용해서 0.86$mu extrm{m}$에서 작동하는 VMDP가 제시되었으나 이 형태는 현 광통신 시스템에 적용하기에는 부적당한 파장대역이다. 이에 본 연구에서는 InGaAsP/InP를 기반으로 1.55$\mu\textrm{m}$에서 작동하는 VMDP를 설계하고자 한다. (중략)