• 제목/요약/키워드: ${\gamma}electron$

검색결과 592건 처리시간 0.044초

Monte Carlo Algorithm-Based Dosimetric Comparison between Commissioning Beam Data across Two Elekta Linear Accelerators with AgilityTM MLC System

  • Geum Bong Yu;Chang Heon Choi;Jung-in Kim;Jin Dong Cho;Euntaek Yoon;Hyung Jin Choun;Jihye Choi;Soyeon Kim;Yongsik Kim;Do Hoon Oh;Hwajung Lee;Lee Yoo;Minsoo Chun
    • 한국의학물리학회지:의학물리
    • /
    • 제33권4호
    • /
    • pp.150-157
    • /
    • 2022
  • Purpose: Elekta synergy® was commissioned in the Seoul National University Veterinary Medical Teaching Hospital. Recently, Chung-Ang University Gwang Myeong Hospital commissioned Elekta Versa HDTM. The beam characteristics of both machines are similar because of the same AgilityTM MLC Model. We compared measured beam data calculated using the Elekta treatment planning system, Monaco®, for each institute. Methods: Beam of the commissioning Elekta linear accelerator were measured in two independent institutes. After installing the beam model based on the measured beam data into the Monaco®, Monte Carlo (MC) simulation data were generated, mimicking the beam data in a virtual water phantom. Measured beam data were compared with the calculated data, and their similarity was quantitatively evaluated by the gamma analysis. Results: We compared the percent depth dose (PDD) and off-axis profiles of 6 MV photon and 6 MeV electron beams with MC calculation. With a 3%/3 mm gamma criterion, the photon PDD and profiles showed 100% gamma passing rates except for one inplane profile at 10 cm depth from VMTH. Gamma analysis of the measured photon beam off-axis profiles between the two institutes showed 100% agreement. The electron beams also indicated 100% agreement in PDD distributions. However, the gamma passing rates of the off-axis profiles were 91%-100% with a 3%/3 mm gamma criterion. Conclusions: The beam and their comparison with MC calculation for each institute showed good performance. Although the measuring tools were orthogonal, no significant difference was found.

PS(Phase Shift)방법을 이용한 3차원 형상 측정에 대한 연구 (A study of Three Dimension Shape Measurement by PS(Phase-Shift))

  • 이혜인;김혜진;황보승
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1784-1785
    • /
    • 2011
  • PS(Phase Shift) 방식을 이용하여 3차원 이미지 형상복원 시스템을 구현하였다. PS 방식은 위상을 이동시켜서 얻어진 강도를 arctan 시킴으로써 $-{\pi}{\sim}{\pi}$ 범위의 접혀진(wrapped) 위상을 얻을 수 있으며, 이러한 wrapped 위상을 위상 펼침(unwrapping) 알고리즘을 이용하여 불연속을 제거할 수 있다. 얻어진 위상 정보는 물체의 높이 정보에 비례하기 때문에 위상 분포로써 3차원 형상을 복원할 수 있다. Unwrapping 알고리즘에는 다양한 방식이 있지만 본 연구에서는 LabVIEW 프로그램을 이용하여 Goldstein 알고리즘을 구현하였으며, 감마(Gamma) 효과에 의한 노이즈를 줄이기 위하여 프로젝트와 카메라의 보정(calibration) 프로그램을 개발 및 적용하였다. 이와 같은 실험을 통하여 효과적으로 3차원 형상 정보를 얻을 수 있었다.

  • PDF

Control of secondary electron emission coefficient with microstructural change of polycrystalline MgO films

  • Yu, Hak-Ki;Lee, Jong-Lam;Park, Eung-Chul;Kim, Jae-Sung;Ryu, Jae-Hwa
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.1445-1447
    • /
    • 2008
  • Micro crystal structure of polycrystalline MgO film is controlled by adjusting the energy of particles arrived at the substrate during deposition. The change of crystal structure affects on the total area of (200) surface where the oxygen vacancies are formed easily, resulting in the change of secondary electron emission (SEE) coefficient($\gamma$).

  • PDF

Convergent beam electron diffraction의 정량분석을 응용한 재료의 구조분석 (Applications of quantitative convergent beam electron diffraction measurement for structural characterization)

  • 김규현;이민희;정새은;고세현
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2014년도 추계학술대회 논문집
    • /
    • pp.176-177
    • /
    • 2014
  • The new algorithm was proposed to quantify symmetry recorded in convergent beam electron diffraction (CBED) patterns and symmetry mapping. The proposed algorithm is based on the normalized cross-correlation coefficient (${\gamma}$) for quantifying the amount of symmetry in a CBED pattern. The quantification and mapping procedures are automatically controlled by the script implemented in Gatan Digital Micrograph$^{(c)}$. We apply the quantitative CBED measurement to a strained Si sample to test the sensitivity to defects.

  • PDF

The Synthesis of Maghemite and Hematite Nanospheres

  • Dar, Mushtaq Ahmad;Ansari, Shafeeque G.;Wahab, Rizwan;Kim, Young-Soon;Shin, Hyung-Shik
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.472-473
    • /
    • 2006
  • Maghemite and hematite nanospheres were synthesized by using the Sol-gel technique. The structural properties of these nanosphere powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and pore size distribution. Hematite phase shows crystalline structures. The mean particle size that resulted from BET and XRD analyses were 4.9 nm and 2 nm. It can be seen from transmission electron microscopy that the size of the particles are very small which is in good agreement with the FESEM and the X-ray diffraction. The BET and pore size method were employed for specific surface area determination.

  • PDF

Effect of Secondary Electron Emission of Phosphor on the Plasma Display Panel Discharge

  • Song, Su-Bin;Park, Pil-Yong;Lee, Han-Yong;Sea, Jeong-Hyun;Kang, Kyung-Doo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.594-597
    • /
    • 2002
  • We studied the effect of secondary electron emission from the back plate of AC-PDP, on the ramp waveform driving of the system, using two-dimensional PDP cell discharge simulator. It is found that the secondary electron emission from back plate plays a significant role in getting a stable weak discharge during the ramping up of X-Y electrode voltage. This is because grounded address electrode acts as a cathode during the setup of surface charge, and the secondary electron emission from phosphor in the back plate must be large enough to accumulate surface charges on the dielectric layers without strong plasma discharge. We have concluded that the secondary electron emission coefficient(${\gamma}$) of phosphor, besides MgO, must be known to understand the characteristics of the PDP system. A few suggestions for improvement of the system is also made and tested.

  • PDF

$Li^{+}$ 이온 주입된 $Al_2O_3$의 결함 특성 (Defect center of $Li^{+}$ ion implanted $Al_2O_3$)

  • Kim, Tae-Kyu
    • 한국의학물리학회지:의학물리
    • /
    • 제5권2호
    • /
    • pp.13-20
    • /
    • 1994
  • 본 연구에서는 감마선 조사, 전자선 조사방법에 의한 전자만의 주업 및 이온 주업 후 전자선조사 방법으로 전자들이 주입된 $\alpha$-$Al_2O_3$의 열자극 발광(Thermoluminescence : TL)에 관련된 결함 형태를 조사하였다. 감마선 조사된 $\alpha$-$Al_2O_3$의 열자극 발광 곡선은 380K, 415K, 440K, 460K 및 475K에서 TL peak가 나타났다. 광흡수 스펙트럼과 자외선 photobleaching 결과로부터 감마선 조사된 $\alpha$-$Al_2O_3$의 380K와 475K TL peak는 F center에, 415K TL peak는 $F^{+}$ center에 기인함을 알았다. 전자선 조사방법에 의하여 전자 주입된 $\alpha$-$Al_2O_3$의 열자극 발광 곡선은 380K, 415K, 440K 및 460K TL peak를 가졌고, $Li^{+}$ 이온 주입 후 전자선 조사방법으로 전자들이 주입된 $\alpha$-$Al_2O_3$는 440K에서 TL peak가 나타났다. 전자선 조사방법에 의한 전자만의 주입과 $Li^{+}$ 이온 주입 후 전자선 조사방법으로 전자들이 주입된 $\alpha$-$Al_2O_3$의 열자극 발광 특성은 380K TL peak는 F center에, 440K TL peak는 $F^{+}$ center에 기인함을 보였다.

  • PDF

ESR 분석법에 의한 감마선 조사 처리 건조어류 및 연체류의 조사 여부 판별 특성 (Identification Characteristics of Gamma-Irradiated Dried Fishery and Mollusks Products Using Electron Spin Resonance Spectroscopy)

  • 김문영;김귀란;김동술;장홍근;권중호
    • 한국식품영양과학회지
    • /
    • 제44권5호
    • /
    • pp.725-731
    • /
    • 2015
  • 감마선 조사된 건조수산품 8종을 electron spin resonance(ESR) 측정법에 의한 조사 처리 여부 가능성을 알아보았다. 연체류 3종(꼴뚜기, 오징어, 한치) 및 건조어류 5종(가자미, 갈치, 꽁치, 디포리, 쥐포)의 비 조사 시료와 감마선 조사(1, 5, 10 kGy) 시료를 어육과 골수를 제거한 후 뼈를 건조한 다음 시료로 사용하였다. 그 결과 모든 건조수산품은 조사선량이 증가함에 따라 유의적으로 ESR signal intensity가 증가하였으나 조사 유래 특이 라디칼인 hydroxyapatite는 뼈가 포함된 꽁치, 가자미, 갈치 시료에서 비 조사 및 조사 시료와의 뚜렷한 차이를 나타내어 조사 여부 확인이 가능하였다. 또한 HA ratio를 비교해볼 때 갈치가 가자미 및 꽁치에 비해 hydroxyapatite 라디칼의 생성률이 가장 높은 것으로 확인되었으며 조사선량이 증가할수록 증가하였다. 그러나 꽁치는 5, 10 kGy, 가자미와 갈치는 모든 조사 처리구에서 확인이 가능한 반면, 연체동물인 꼴뚜기, 오징어, 한치의 경우 조사 유래 특이 라디칼이 확인되지 않았다. 따라서 본 연구에서는 8종의 건조수산품 중 연체류를 제외한 뼈를 포함한 건조어류 가공품에 대하여 ESR 적용 가능성을 확인하였다.

The Properties of Boron-doped Zinc Oxide Film Deposited according to Oxygen Flow Rate

  • Kim, Dong-Hae;Son, Chan-Hee;Yun, Myoung-Soo;Lee, Jin-Young;Jo, Tae-Hoon;Seo, Il-Won;Jo, I-Hyun;Roh, Jun-Hyung;Choi, Eun-Ha;Uhm, Han-Sup;Kwon, Gi-Chung
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.358-358
    • /
    • 2012
  • The application of BZO (Boron-doped Zinc Oxide) films use as the TCO(Transparent Conductive Oxide) material for display and solar cell industries, where the conductivity of the BZO films plays a critical role for improvement of cell performance. Thin BZO films are deposited on glass substrates by using RF sputter system. Then charging flow rates of O2 gas from zero to 10 sccm, thereby controlling the impurity concentration of BZO. BZO deposited on soda lime glass and RF power was 300 W, frequency was 13.56 MHz, and working pressure was $5.0{\times}10-6$ Torr. The Substrate and glass between distance 200 mm. We measured resistivity, conductivity, mobility by hall measurement system. Optical properties measured by photo voltaic device analysis system. We measured surface build according to oxygen flow rate from XPS (X-ray Photoelectron Spectroscopy) system. The profile of the energy distribution of the electrons emitted from BZO films by the Auger neutralization is measured and rescaled so that Auger self-convolution arises, revealing the detail structure of the valence band. It may be observed coefficient ${\gamma}$ of the secondary electron emission from BZO by using ${\gamma}$-FIB (Gamma-Focused Ion Beam) system. We observed the change in electrical conductivity by correlation of the valence band structure. Therefore one of the key issues in BZO films may be the valence band that detail structure dominates performance of solar cell devices. Demonstrating the secondary electron emission by the Auger neutralization of ions is useful for the determination of the characteristics of BZO films for solar cell and display developments.

  • PDF

Metamorphic HEMT에서 low-k Benzocyclobutene(BCB)를 이용한 표면 passivation 비교 연구 (Comparative Study of surface passivation for Metamorphic HEMT using low-k Benzocyclobutene(BCB))

  • 백용현;오정훈;한민;최석규;이복형;이성대;이진구
    • 대한전자공학회논문지SD
    • /
    • 제44권4호
    • /
    • pp.80-85
    • /
    • 2007
  • Passivation 기술은 소자를 외부 환경의 영향으로부터 보호할 수 있고, 소자 성능의 감소를 예방할 수 있기 때문에 능동 소자 제작에 있어서 매우 중요하다. 본 논문에서 passivation 물질로 낮은 유전 상수를 갖는 benzocyclobutene (BCB)과 전통적인 passivation 물질인 Si3N4를 이용하여 GaAs를 기반으로 하는 $0.1{\mu}m\;{\Gamma}$-gate InAlAs/InGaAs metamorphic high electron mobility transistors (MHEMTs)를 제작하였다. 제작된 MHEMT의 특성은 passivation 전과 후로 구분하여 비교하였다. Passivation후 BCB와 Si3N4를 이용한 경우 모두에서 passivation 이전에 비해 저하된 DC 및 RF 특성을 나타내었으나, BCB를 이용하여 passivation을 한 소자들이 전통적인 passivation 물질인 Si3N4를 이용한 소자들에 비해서 상대적으로 낮은 특성 저하를 DC와 RF에서 함께 나타내었다.