• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.613-619
• /
• 2016

The aim of this study is to improve of dielectric properties using epoxy/nano alumina composites with adding glycerol diglycidyl ether (GDE:1,2 g). This paper deals with the effects of dielectric properties(${\epsilon}^{\prime}_r$ and $tan{\delta}$) for epoxy/nano alumina contents (1,3 phr) and GDE addition (1,2 g)composites. 5 kinds specimen were prepared with containing epoxy resins, epoxy nano alumina composites. Average particle size of nano used were 30 nm. The nano alumina used were gamma phase particles of spherical shape. The suppression of epoxy chain motion by addition of nano alumina+GDE decreased dielectric loss and relative permittivity magnitude.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.8-14
• /
• 2009

하이브리드 촉매를 이용하여 합성가스로부터 디메틸에테르(DME)를 1단계 공정으로 합성하였다. 하이브리드 촉매는 메탄올 합성반응을 위하여 Cu-ZnO-$Al_2O_3$, 메탄올 탈수반응을 위하여 aluminum phosphate 혹은 $H_3PO_4$-modified $\gamma$-alumina로 구성되었다. 제조한 촉매들은 XRD, BET, SEM, FT-IR, $NH_3$-TPD를 이용하여 특성분석을 하였다. XRD 분석을 통해 aluminum phosphate가 잘 합성되었음을 알 수 있었다. BET 분석을 통해 aluminum phosphate의 비표면적이 P/Al의 비에 따라서 달라짐을 확인할 수 있었다. 반응실험 결과 메탄올 탈수 촉매로 사용된 aluminum phosphate의 P/Al의 비가 1.2인 하이브리드 촉매에서 55%의 CO 전환율과 70%의 DME 선택도를 보여 주었다. $\gamma$-alumina를 인산으로 처리한 경우 촉매활성 감소를 막을 수 있었다. 하지만 85%의 진한인산으로 처리한 경우에는 촉매 활성 및 DME 선택도가 낮아짐을 확인할 수 있었다.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.329-334
• /
• 2001

붕산용액에서 양극산화법으로 장벽형 산화피막을 형성시킨 후 미세조직을 관찰하였다. 양극산화시 인가되는 전압에 따른 피막의 성장속도는 1.54nm/v의 직선적인 관계를 나타냈으며 300v의 인가전압에서 생성된 산화피막의 조직은 50$0^{\circ}C$에서 열처리하였을 경우 피막의 상 전이가 일어나지 않았으나 높은 인가전압에서 생성된 산화피막의 경우는 피막의 조직이 비정질에서 ${\gamma}$-alumina로 변태되는 것이 관찰되었다. 또한 피막이 전자빔 조사에 의해서도 ${\gamma}$-alumina로 전이가 일어났다.

• 대한화학회지
• /
• 제36권1호
• /
• pp.147-156
• /
• 1992

${\alpha}-{\beta}-,{\gamma}$-알루미나 및 MgO를 담체로 사용하여 담지된 납산화물 촉매를 제조하였다. 담지된 납산화물 촉매상에서 메탄의 $C^{2+}$ 탄화수소로의 전환반응은 MgO 담지촉매에서 $C^{2+}$ 선택도가 최대로 얻어졌으며, ${\gamma}$-알루미나 담지 PbO 촉매에서는 $CO_2$ 선택도가 높았다. 그리고 ${\alpha}$-알루미나 담지촉매에서는 중간정도의 활성이 얻어졌으며, ${\beta}$-알루미나 담지촉매에서는 활성이 거의 나타나지 않았다. 이러한 반응특성은 촉매의 격자산소의 활성에 크게 의존하였으며, 또한 격자 산소의 활성은 담체와 산화물간의 상호작용과 담체의 성질에 영향받았다. 특히 MgO 담지 촉매에서는 X-선 회절분석에서 여타의 담체에서보다 PbO 산화물의 (002)면의 피크 세기가 (111)면의 세기에 비해 훨씬 크게 나타난 것으로 볼 때 메탄의 Oxidative Coupling 반응에서의 표면산화물-담체 상호작용(SOSI)의 한 예로 여겨졌다.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1504-1510
• /
• 2016

The aim of this study is to improve properties both glass transition temperature($T_g$) and coefficient of thermal expansion(CTE) using epoxy/micro-nano alumina composites with adding glycerol diglycidyl ether (GDE:1,2,3,5g). This paper deals with the effects of GDE addition for epoxy/micro alumina contents (40, 50, 60wt%)+surface modified nano alumina(1_phr) composites. 20 kinds specimen were prepared with containing micro, nano alumina and GDE as a micro composites(10, 20, 30, 40, 50, 60, 70wt%) or a nano/micro alumina composites(1phr/40, 50, 60wt%). Average particle size of nano and micro alumina used were 30nm and $1{\sim}2{\mu}m$, respectively. The micro alumina used were alpha phase with Heterogeneous and nano alumina were gamma phase particles of spherical shape. The glass transition temperature and coefficients of thermal expansion was evaluated by DSC and TMA. The glass transition temperature decreased and coefficients of thermal expansion become smaller with filled contents of epoxy/micro alumina composites. On the other hand, $T_g$ and CTE as GDE addition variation(1,2,3,5g) of epoxy/micro-nano alumina composites decreased and increased respectively.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1511-1517
• /
• 2016

The aim of this study is to improve of properties for electrical AC insulation breakdown strength using epoxy/micro-nano alumina composites with adding glycerol diglycidyl ether (GDE:1,3,5g). This paper deals with the effects of GDE addition for epoxy/micro alumina contents (40,50,60wt%)+surface modified nano alumina(1_phr) composites. 14 kinds specimen were prepared with containing epoxy resins, epoxy micro composites and epoxy nano-micro alumina mixture composites. Average particle size of nano and micro alumina used were 30nm and $1{\sim}2{\mu}m$, respectively. The micro alumina used were alpha phase with Heterogeneous and nano alumina were gamma phase particles of spherical shape. The electrical AC insulation breakdown strength was evaluated by sphere to sphere electrode system and raising velocity 1kV/s. The AC breakdown strength decreased insulation properties of multi-composites according to increasing micro alumina and GDE addition contents.

• 한국대기환경학회지
• /
• 제23권3호
• /
• pp.277-285
• /
• 2007

Porous cordierite beads, of which the average pore size was $130{\mu}m$ and porosity was about 80%, were prepared by the foaming method and then their application as support of the $Pt/{\gamma}-alumina$ catalyst for $NO_x$, reduction with propene was investigated. The pressure drop of a 2 mm porous beads filter was less than that of a 1 mm porous beads filter and the difference in pressure drop between these two increased as the flow rate increased. The catalytic activity of $Pt/{\gamma}-alumina$ washcoated on the porous bead was tested with varying Pt loading $(0.005{\sim}0.1g/cm^3),\;C_3H_6/NO$ mole ratio $(0.5{\sim}8)$, space velocity $(20,000{\sim}30,000h^{-1})$ and oxygen contents (1 and 8). Pt loading of $0.04g/cm^3$ showed the highest activity for $NO_x$ conversion. The $De-NO_x$, test was operated in the temperature range of $200{\sim}400^{\circ}C$ and the best operation temperature of the catalytic filter is about $250^{\circ}C$. As the C/N ratio increased, increase of the $NO_x$, conversion might result from the increase in exhaustion of the amount of oxygen by the reduction of hydrocarbon. $NO_x$ conversion at $20,000h^{-1}$ of space velocity shows a maximum 34% higher conversion than that at $30,000h^{-1}$. On condition that $O_2$ was 5%, space velocity was $20,000h^{-1}$ and the C/N ratio was 8, the $NO_x$ conversion exhibited a maximum of 40% at $250^{\circ}C$.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1045-1053
• /
• 1993

Alumina hydrates were prepared by the neutralization of AlCl3.6H2O solution with NH3 gas diluted with N2 gas. The values of pH in reaction solution influenced the formation of alumina hydrates minerals. Amorphous alumina hydrates, for example, were formed at ${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. (2) Bayeritelongrightarrowamorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\delta$-Al2O3longrightarrowη-Al2O3longrightarrow$\theta$-Al2O3longrightarrow$\alpha$-Al2O3. On the other hand, the shape of alumina hydrates whichw ere prepared by the reacton of Al2(SO4)3.16H2O solution and NH3 gas was spherical, the progress of its phase transformation with increasing temperature was amorphouslongrightarrow${\gamma}$-Al2O3longrightarrow$\alpha$Al2O3 in sequence.

• Nuclear Engineering and Technology
• /
• 제38권5호
• /
• pp.423-426
• /
• 2006

A developed neutron activation analysis(NAA) and gamma-spectrometry were applied to improve the analytical sensitivity and precision of impurities in electronic-circuit raw materials. It is well known that soft errors in high precision electronic circuits can be induced by alpha particles emitted from naturally occurring radioactive impurities such as U and Th. As electronic circuits have recently become smaller in dimension and higher in density, these alpha-particle emitting radioactive impurities must be strictly controlled. Therefore, new NAA methods have been established using a HTS(Hydraulic Transfer System) irradiation facility and a background reduction method. For eliminating or stabilizing fluctuated background caused by Rn-222 and its progeny nuclides in air, a nitrogen purging system is used. Using the developed NAA and gamma-spectrometry, ultra trace amounts of U(0.1ng/g) and Th(0.01ng/g) in an alumina ball and high purity silica used for an epoxy molding compound (EMC) could be determined.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.705-711
• /
• 1991

Alumina precursor sol was obtained by the reaction of Al(OC4H9)3 and acetylacetone in the solvent followed by the partial hydrolysis. This sol was measured by viscosity and the effect of pH. The powders obtained from this sol were calcined at the various temperatures. The transition of crystals and crystal state were investigated at the various temperatures. The powders dried at 90$^{\circ}C$ showed amorphous and ${\gamma}$-Al2O3 at 900$^{\circ}C$, ${\alpha}$-Al2O3 mono-phase at 1050$^{\circ}C$ respectively. As a result of Al27-MASNMR analysis, amorphous and ${\alpha}$-Al2O3 powders showed 6-coordinated Al, ${\gamma}$-Al2O3 4-coordinated Al respectively.