• 천문학회보
• /
• 제43권1호
• /
• pp.41.2-41.2
• /
• 2018

EL CVn-type eclipsing binaries are composed of a massive A-type main-sequence primary star and a hotter B-type secondary one. These are worthy of particular attention because the secondary stars are rare objects to be extremely low-mass white dwarf precursors (ELM proto-WD) with the mass of ${\leq}0.2M_{\odot}$, evolving to higher effective temperatures and higher surface gravities. A few of them were discovered to show multi-periodic pulsations in one or both components. We monitored one of these rare and interesting objects, J0247-25 (=1SWASP J024743.37-251549.2), at two KMTNet sites of SAAO in South Africa and SSO in Australia. The observations were performed with the KMTNet 1.6m telescopes and pre-science 4K CCD cameras during the system test run from July to November 2014. Using the photometric data obtained for a total of 23 nights, we constructed well-defined eclipsing light curves in B/V-bands and derived absolute parameters (mass and radius, etc.) of each binary component. After subtracting model eclipsing curves from the data, we detected seven frequencies with 33~53 cycles per day (c/d) and identified them to be Delta Sct-type pulsations originated from the A-type primary component. Five frequencies were turned out to be excited by rotational splitting of non-radial pressure modes, enabled us to investigate rotational properties. We could not detect any frequency higher than 100 c/d, implying that pulsation amplitudes of the proto-WD secondary decrease greatly.

• 한국컴퓨터그래픽스학회논문지
• /
• 제24권1호
• /
• pp.27-33
• /
• 2018

본 논문은 컬러 이미지대상 고용량 데이터 은닉을 위한 새로운 적응형 least-significant-bit(LSB) 스테가노그라피 알고리즘을 제시한다. 은닉할 데이터 비트와 교체하기 위한 컬러 이미지 픽셀의 빨강, 초록, 파랑 (RGB) 컴포넌트의 LSB 비트 수는 peak signal noise ratio (PSNR) 최저값 분석을 통해 결정하였다. 은닉 데이터의 70%는 픽셀의 두 색상 컴포넌트 LSB 3비트를, 나머지 컴포넌트 LSB 2 비트를 교체하고, 30%는 모든 RGB 컴포넌트 LSB 4비트를 교체하는 조합을 제안한다. 또한, 데이터를 은닉할 에지영역 픽셀 선택을 위하여 지역적인 정렬방법도 제안한다. 본 방법은 픽셀 당 9.2 비트(9.2bpp)의 고용량 은닉이 가능하다. 30K - 60K바이트 데이터 은닉 실험결과 512x512 컬러 이미지의 평균 PSNR값은 43.9db이고 자연스러운 히스토그램도 도출되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.7-13
• /
• 1998

In order to reconstruct the traditional technology of Korean golden varnish(Hwangchil) made from the exudates of D. morbifera, this study in the second step was carried out to analyze the chemical composition and oil properties of the exudates for coatings and bark extractives made from the trees of D. morbifera more than 20 years old grown in Wando and Jejudo islands in the southwestern part of Korean peninsula according to the physiological seasons. The results obtained are as follows: 1. The exudates appeared to be a phytoalexin because it exudated after several days in tapping only in summer season. 2. Both the exudates and bark-extracts with acetone contained 50~60% unsaponifiables and 30~50% saponifiables 3. A major component of essential oil in bark-extractives was ${\beta}$-cubebene and reached to 60~80%, while that of exudates included only 34% ${\beta}$-cubebene and some other compounds such as ${\beta}$-cadinene of 12%, aromadendrene of 9%, ${\beta}$-selinene of 9%, CAS030021-74-0 of 10%, etc. in GC-MS spectrometer. 4. A mjor component of fatty oil fraction in bark-extractives was linoleic acid and reached to more than 60%, while the exudates had mostly other components such as terpenes and phenolics instead of fatty acids accordint to GC-MS spectrometer. 5. Iodine value of samples after oil refining had 214mg/g in the exudates and more than than 150mg/g in bark-extractives, so the latter belonged to a drying oil.. 6. Therefore, the exudates from D. morbifera for traditional Korean golden varnish seems to have beeen used to a good varnish because it has some specific compounds different from its bark-extractives or general varnishes.

• 한국식품영양과학회지
• /
• 제36권7호
• /
• pp.874-880
• /
• 2007

품종에 따른 포도를 이용하여 3일 동안 $4^{\circ}C$와 실온에 각각 저장함에 따라 변화하는 전체적인 향의 패턴을 전자코를 통하여 분석하였고 SPME-GC/MS 분석 결과를 통하여 휘발성분을 분리 동정하였다. 대표적인 포도의 주요 휘발 성분은 alcohols, esters, acids, terpenes 등으로 GC/MS 분석 결과 butanoic acid/ethyl ester와 1-hexanol, hexanoic acid/ethyl ester, phenylethyl alcohol 등이 주요 성분으로 동정되었다. 캠벨은 다른 품종에 비해 다양한 휘발 성분이 동정되었고 레드글로브와 머루 품종에서는 1-hexanol, 2-decene, 8-methyl-(z)/1-dodecanol 등을 제외한 나머지 휘발 성분은 거의 나타나지 않았다. 또한 전자코를 이용하여 휘발성 향기성분 패턴 분석결과 $4^{\circ}C$와 실온 저장한 시료의 제 1주성분 값의 기여율은 각각 99.30, 99.36%로 품종에 따라 구분이 가능하였다. $4^{\circ}C$ 저장 시 저장 기간에 따른 제 1주성분 값의 변화 범위는 실온에서 저장한 것에 비해 적었음을 확인할 수 있었다.

• Journal of Microbiology
• /
• 제45권3호
• /
• pp.227-233
• /
• 2007

In budding yeast, septin plays as a scaffold to recruits protein components and regulates crucial cellular events including bud site selection, bud morphogenesis, Cdc28 activation pathway, and cytokinesis. Phosphorylation of Bni5 isolated as a suppressor for septin defect is essential to Swe1-dependent regulation of bud morphogenesis and mitotic entry. The mechanism by which Bni5 regulates normal septin function is not completely understood. Here, we provide evidence that Bni5 phosphorylation is important for interaction with septin component Cdc11 and for timely delocalization from septin filament at late mitosis. Phosphorylation-deficient bni5-4A was synthetically lethal with $hof1{\Delta}$. bni5-4A cells had defective structure of septin ring and connected cell morphology, indicative of defects in cytokinesis. Two-hybrid analysis revealed that bni5-4A has a defect in direct interaction with Cdc11 and Cdc12. GFP-tagged bni5-4A was normally localized at mother-bud neck of budded cells before middle of mitosis. In contrast, at large-budded telophase cells, bni5-4A-GFP was defective in localization and disappeared from the neck approximately 2 min earlier than that of wild type, as evidenced by time-lapse analysis. Therefore, earlier delocalization of bni5-4A from septin filament is consistent with phosphorylation-dependent interaction with the septin component. These results suggest that timely de localization of Bni5 by phosphorylation is important for septin function and regulation of cytokinesis.

• 대한원격탐사학회지
• /
• 제23권3호
• /
• pp.161-169
• /
• 2007

A study was conducted in the Hong Kong with the aim of deriving an algorithm for the retrieval of suspended sediment (SS) and sea surface salinity (SSS) concentrations from Aqua/MODIS level 1B reflectance data with 250m and 500m spatial resolutions. 'In-situ' measurements of SS and SSS were also compared with coincident MODIS spectral reflectance measurements over the ocean surface. This is the first study of SSS modeling in Southeast Asia using earth observation satellite images. Three analysis techniques such as multiple regression, linear regression, and principal component analysis (PCA) were performed on the MODIS data and the 'in-situ' measurement datasets of the SS and SSS. Correlation coefficients by each analysis method shows that the best correlation results are multiple regression from the 500m spatial resolution MODIS images, $R^2$= 0.82 for SS and $R^2$ = 0.81 for SSS. The Root Mean Square Error (RMSE) between satellite and 'in-situ' data are 0.92mg/L for SS and 1.63psu for SSS, respectively. These suggest that 500m spatial resolution MODIS data are suitable for water quality modeling in the study area. Furthermore, the application of these models to MODIS images of the Hong Kong and Pearl River Delta (PRO) Region are able to accurately reproduce the spatial distribution map of the high turbidity with realistic SS concentrations.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.333-338
• /
• 2006

Silk fibroin (SF) fiber from the Antheraea pernyi silkworm was treated with a 1.23 N iodine-potassium iodide ($I_2-KI$) aqueous solution, and the structure and physical properties were investigated to clarify the effects of the iodine treatment. The noticeably high weight gain value of SF fiber, about 25 wt% was attributed to the absorption of polyiodide ions in the form of $I_3{^-}\;and\;I_5{^-}$. Fourier transform infrared spectroscopy and X-ray diffraction measurements suggested that polyiodide ions mainly entered the amorphous region. In addition, a new sharp reflection on the meridional direction, corresponding to a period of $7.0{\AA}$, was observed and indicated the possibility of the formation of mesophase structure of ${\beta}$-conformation chains. Dynamic viscoelastic measurements showed that the damping tan ${\delta}$ peak at $270^{\circ}C$ gradually shifted to lower temperature in the iodinated SF fibers, suggesting an enhancement of the molecular motion of the fibroin chains induced by the presence of polyiodide ions. With heating above $254^{\circ}C$, the iodine component introduced intermolecular cross-linking of SF, and the melt flow of the sample was inhibited. The thermal decomposition stability of fibroin molecules was greatly enhanced by iodine treatment.

• Journal of Welding and Joining
• /
• 제26권1호
• /
• pp.69-75
• /
• 2008

Spot welding which use the main process for side block production of stainless steel railway vehicle is legged behind in laser welding about a quality and productivity. Although the laser welding has many potential advantages such as low heat input and aspect ratio of weld bead, its application to a new structural component still is required many engineering data including mechanical properties such as tensile, fatigue strength, etc on. Therefore, experimental analysis was carried out to understand the fatigue phenomena of different thickness stainless steel overlap joining panels by Nd:YAG laser welding. The fatigue life curves were obtained through fatigue tests with the various levels of applied load. The fatigue life is related with the parameters such as gap size and penetration depth through experiment. As the results, tensile strength and fatigue life were proportional in heat input level and gap was identified the major factor for fatigue life. Also we could know that deferent a-ferrite content at HAZ depend on welding heat input was important factor to determine a formation of initial crack and total fatigue life cycle.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.231-237
• /
• 2007

For an aspect ratio (transport length-to-width) of 5, Pr=3.34, Le=0.078, Pe=4.16, Cv=1.01, $P_B=50$ Torr, only thermally buoyancy-driven convection ($Gr=4.83{\times}10^5$) is considered in this study in spite of the disparity in the molecular weights of the component A ($Hg_2Cl_2$) and B which would cause thermally and/or solutally buoyancy-driven convection. The crystal growth rate and the maximum velocity vector magnitude are decreased exponentially for $3{\le}Ar{\le}5$, for (1) adiabatic walls and (2) the linear temperature profile, with a fixed source temperature. This is related to the finding that the effects of side walls tend to stabilize convection in the growth reactor. The rate for the linear temperature profiles walls is slightly greater than for the adiabatic walls far varied temperature differences and aspect ratios. With the imposed thermal profile, a fixed source region, both the rate and the maximum velocity vector magnitude increase linearly with increasing the temperature difference for $10{\le}{\Delta}T{\le}50K$.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.410-417
• /
• 2017

저장조건에 따른 금산 추부깻잎의 물리적 특성을 분석하였다. 깻잎의 a/b값은 저장기간이 증가할수록 증가하는 경향을 보였다. 저장온도 $25^{\circ}C$와 $4^{\circ}C$에서 제 1주성분 값의 기여율은 각각 93.07%, 97.81%로 나타나 전자코를 이용한 저장온도에 따른 휘발성 향기성분 패턴의 구별이 가능하였다. 저장기간에 따른 제 1주성분 값의 변화는 저장온도 $25^{\circ}C$에 비해 $4^{\circ}C$에서 변화의 폭이 적었음을 확인할 수 있었다.