• Science of Emotion and Sensibility
• /
• v.9 no.1
• /
• pp.39-48
• /
• 2006

This study was carried out to investigate sound sensation of Korean traditional silk fabrics with similar sound pressure levels (SPL) and to identify secondary physical factors excluding SPL which determine sound sensation of the fabrics. Sounds of the silk fabrics tended to be perceived differently from one another as for some of sensation such as clearness ant roughness. They were felt more strongly in aspects of loudness, roughness, and highness than of softness, sharpness, clearness, and pleasantness. Subjective clearness, roughness, and highness were significantly correlated with some of sound parameters including roughness(z), ${\Delta}L,\;and\;{\Delta}f$. Especially, both of clearness and roughness which were varied among the fabrics were found as determined by ${\Delta}L$. This result means that ${\Delta}L$ as well as roughness(z) and ${\Delta}f$ could be utilized secondary to SPL in order to satisfy some of human sensibility for sound from traditional silk fabrics without variation of physical loudness.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1149-1157
• /
• 2000

To confirm the factors concerning color changes of traditional kochujang, heating, U.V. and $N_2$ gas substitution treatment were conducted on duk(rice cake) kochujang and shikhae(malt digested syrup) kochujang. The value of L, a and b value by Hunter of each kochujang were gradually decreased during fermentation and ${\delta}E$ increased. The ${\delta}E$ value of duk kochujang treated by U.V. was higher than those of the other treatments and non heated shikhae kochujang showed higher ${\delta}E$ value. The main cause of color change by factor analysis on various factors of duk kochujang and shikhae kochujang were light, and light and heat respectively. The acetone and water extracted pigments had maximum absorbance at 450-470 nm and 200-205 nm respectively.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.402-404
• /
• 2005

2004년 7월부터 2005년 2월까지 8개월 동안 강원도 정선지역 탄산염지대 지하수 및 하천수의 ${\delta}^{13}C$의 조사 결과, 탄산염 지대 지하수의 13C는 $-12.07{\sim}-8.63$ (평균 -10.34 ), 탄사염지대 하천수의 ${\delta}^{13}C$는 $-10.32{\sim}-6.80$ (평균 -7.944 ) 이었다. 하천수와 지하수 ${\delta}^{13}C$는 수온(T)과 음의 상관관계를 보이고 물의 전기전도도(EC)와 양의 상관관계를 보이며, 여름보다 겨울에 높은 값을 보이는 반면 산화환원 전위(Eh), 용존산소(DO), pH와는 상관관계가 미약함을 보이고 있다. 탄산염지대 지하수 및 하천수의 ${\delta}^{13}C$는 연구지역의 지하수와 하천수가 탄산염암의 용해, 대기 $CO_2$와 용존 $CO_2$의 교환, 유입된 대기 $CO_2$가 물 분자와 반응하여 ${HCO_3}^-$ 이온으로 전환될 때 있는 분별작용의 효과에 의해 주로 영향을 받았으며 수중생물의 신진대사에 의한 변화는 미미한 것으로 나타났다.

• Venture DIGEST
• /
• s.118
• /
• pp.4-7
• /
• 2008

새 정부는 지난 3월 지식경제부 업무 보고를 통해 부품소재산업의 중요성을 강조하며 적극적인 육성 의지를 밝혔다. 이명박 대통령도 $\Delta$외국인 투자를 통한 기술 획득 $\Delta$대-중소기업간 협력을 통한 공동 기술 개발등의 전략이 필요함을 강조했다. 또한 최근 엔화가 강세를 보이자 대일 의존도가 높은 부품소재 산업에 대한 기업의 투자확대 필요성은 더욱 절실해지고 있다. 이에 대일 무역수지 적자의 주범인 부품소재 대일 의존도를 오는 2012년까지 20%이하로 개선하려는 정부의 목표에 따라 중소벤처와 대기업간의 상생협력도 중요한 전환기를 맞고 있다. 제품의 완성도와 품질을 결정짓는 주요 요인 부품소재 산업. 그 기술의 현황과 전망을 알아본다.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.17-24
• /
• 1994

The urinary excretion of ${\delta}$-aminolevulinic acid has been widely used as a measure of the biological effect of lead in lead exposed workers. It is usually measured by colorimetric method based on the color reaction of ALA-pyrrole with Ehrlich's reagent. But the results of ${\delta}$-ALA in urine by this method are somewhat artificially higher than expected due to the urinary ALA-like compound such as aminoacetone. On the other hand, the recently developed fluorometric HPLC method is very sensitive and specific for the measuring urinary ALA. In order to compare the data obtained by two methods and to investigate the interrelation between two methods, 117 lead workers with different lead exposure were checked urinary ${\delta}$-ALA, blood lead and other lead exposure related indices. The results obtained are as follows; 1. Urinary excretion of ${\delta}$-ALA by colorimetric method is 2.15 times higher than HPLC method in overall, revealing 2.47 times in workers of blood lead less than $20{\mu}g/dl$, 2.53 times in workers of blood lead $21-40{\mu}g/dl$ and 1.86 times in workers of blood lead over $41{\mu}g/dl$, respectively. 2. While the correlation coefficients of ${\delta}$-ALA measured by colorimetric method with blood lead and blood ZPP was 0.571 and 0.629, those of ${\delta}$-ALA measured by HPLC with blood lead and blood ZPP were 0.6l0 and 0.637. All the correlation coefficients were statistically significant, but there was no statistical difference of correlation coefficients between two methods. 3. The correlation coefficient of urinary excretion of ${\delta}$-ALA between two method was 0.838 without any correction, but it was 0.852 with the correction of specific gravity 1.024. 4. Simple linear regression of ${\delta}$-ALA measured by HPLC method on ${\delta}$-ALA measured by colorimetric method was (ALA-UPH)=-0.245+0.536 (ALA-UCO) without any correction and it was (SP ALA)=-0.525+0.598 (SP ALA-UCO) with the correction of specific gravity 1.024. With above results, it is recommended that the diagnostic criteria of ${\delta}$-ALA for lead poisoning needed to be revised if ${\delta}$-ALA is measured by HPLC rather than colorimetric method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1310-1318
• /
• 1998

Sigma-delta converter is frequently used for conyerting low-frequency anglog to digital signal. The converter consists of a modulator and a digital filer, but our work is concentrated on the modulator. In this works, to design second-order sigma-dalta modulator with 14bit resolution, we define maximumerror limits of each components (operational smplifier, integrator, internal ADC, and DAC) of modulator. It is first performed modeling of an ideal second-order sigma-delta modulator. This is then modified by adding the non-ideal factors such as limit of op-amp output swing, the finit DC gain of op-amp slew rate, the integrator gian error by the capacitor mismatch, the ADC error by the cmparator offset and the mismatch of resistor string, and the non-linear of DAC. From this modeling, as it is determined the specification of each devices requeired in design and the fabrication error limits, we can see the final performance of modulator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2465-2471
• /
• 2012

For the steel structures those are used in harsh sea environments, corrosion fatigue is a challenging issue in connection with design life. In this research, in order to investigate the influence of cathodic overprotection on the corrosion fatigue crack propagation behavior, corrosion fatigue crack propagation test under the condition of -950mV vs SCE was conducted by using of high tensile TMCP steel plate and the relationships between da/dN-${\Delta}K$ were obtained. At this test, when ${\Delta}K$ is low, the crack propagation rates were accelerated compared to those of seawater condition, however, when ${\Delta}K$ is high, the crack propagation rates were lower than those of seawater condition. As the cause for the acceleration and deceleration of corrosion fatigue crack propagation rates under the condition of cathodic overprotection, the role of hydrogen and calcareous deposits are discussed.

• Korean Journal of Psychosomatic Medicine
• /
• v.14 no.1
• /
• pp.53-61
• /
• 2006

Objectives: This study was designed to evaluate difference of the alexithymia between panic patients and normal controls by examination of the relationships between different components of the alexithymia construct and level of anxiety and depression in panic patients and normal controls. Methods The subjects were 167 patients who met DSM-IV criteria for panic disorder and 110 normal controls. They drew up symptom checklists and self-rating scales, and were measured by Anxiety Disorders Interview Schedule-Panic attack & Agoraphobia(ADIS-P & A), Korean version of Toronto Alexithymia Scale (TAS-20K), Spielberger State-Trait Anxiety Inventory-State & Trait (STAI-S & T), Beck Depression Inventory (BDI), and Revised Anxiety Sensitivity Index (ASI-R). For statistical analysis, we performed t-test to compare the sociodemographic characteristics and the scores of self reported scales between panic patients and normal controls. Pearson correlation was performed between TAS-20K and it's subfactors, STAI-S & T, ASI-R and BDI in panic patients and normal controls. And stepwise multiple regression analysis was preformed to explain results of correlation analysis for alexithymia. Results: The panic patients reported more significant alexithymic (p<0.001), more difficulty identifying feeling (p<0.001) and describing feeling (p=0.001) than normal controls. Futhermore, panic patients were more significant anxious, sensitive to anxious feeling and depressive than normal controls. Moreover, the alexithymia of panic patients was explained by trait-anxiety $({\Delta}R^2=0.255)$ and anxiety sensitivity $({\Delta}R^2=0.062)$, that of normal controls was predicted by depression $({\Delta}R^2=0.144)$ and anxiety sensitivity $({\Delta}R^2=0.033)$ Conclusion: The panic patients reported more anxious and sensitive to anxious feeling, and these symptoms predict alexithymia in panic patients. However, the alexithymia of normal controls was explained by depression more than anxiety sensitivity, and such a result isn't consistent with previous studies and this may be mainly due to difference of the homogeneity in object of the studies.

• Environmental and Resource Economics Review
• /
• v.14 no.1
• /
• pp.167-199
• /
• 2005

The following policy implications can be drawn from this study: 1) The Air Pollution Emission Amount Report published by the Ministry of Environment since 1991 classifies industries into 4 sectors, i. e., heating, manufacturing, transportation and power generation. Currently, the usability of report is very low and extra efforts should be given to refine the current statistics and to improve the industrial classification. 2) Big pollution industries are as follows - s7, s17 and s20. The current air pollution control policy for these sectors compared to other sectors are found to be inefficient. This finding should be noted in the implementation of future air pollution policy. 3) s10 and s17 are found to be a big polluting industrial sector and its pollution reduction effect is also significant. 4) The effect of emission coefficient (${\Delta}f$) has the biggest impact on the reduction of emission amount change and the effect of economic growth coefficient (${\Delta}y$) has the biggest impact on the increase of emission volume. The effect of production technology factor (${\Delta}D$) and the effect of the change of the final demand structure (${\Delta}u$) are insignificant in terms of the change of emission volume. 5) Further studies on emission estimation techniques on each industry sector and the economic analysis are required to promote effective enforcement of the total volume control system of air pollutants, the differential management of pollution causing industrial sectors and the integration of environment and economy. 6) Korea's economic growth in 1990 is not pollution-driven in terms of the Barry Commoner's hypothesis, even though the overall industrial structure and the demand structure are not environmentally friendly. It indicates that environmental policies for the improvement of air quality depend mainly on the government initiatives and systematic national level consideration of industrial structures and the development of green technologies are not fully incorporated.

• The Korean Journal of Applied Statistics
• /
• v.12 no.2
• /
• pp.593-603
• /
• 1999

표본의 크기의 제1종오류의 확률 $\alpha$, 실용적으로 차이가 있다고 판독되어서 검출하고자하는 요인효과의 오차에 대한 상대적인 크기, 그 값에서의 제2종오류의 확률 $\beta$에 따라서 결정된다. 이 논문에서, 우리는 고정요인과 랜덤요인이 포함된 실험계획에서 표본의 크기를 결정하는 방법을 간단한 MATLAB 프로그램을 사용하여 고려한다. 분할법과 지분요인배치법의 예제를 들어 유의수준 $\alpha$와 최소 표준과 검출효과 $\Delta^*$에서 검정력이 적어도 $1-\beta$를 갖도록 표본의 크기를 결정한다