• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.135-144
• /
• 2005

In the high-Ca limestone zone of the Pungchon Formation of the Lower Chosun Supergroup, cryptocrystalline alterations with reddish brown color occur as fissure-fillings or coatings, which was originated from the upper formation, i. e., the Hwajeol Formation. The precipitates result in degradation and contamination of the high-Ca limestone ore in grade and quality, showing characteristic occurrence and mineral composition typical of suggesting a supergene origin. Chalcedonic quartz, kaolinite, illite, goethite and hematite are constituting a characteristic authigenic mineral assemblage and, in places, smectite is less commonly included in the weathering product. In addition to these authigenic phases, some detrital minerals such as mica and orthoclase constituting relatively coarser grains are also rarely present in the supergene alterations. A rather complex clay facies consisting of kaolinite, illite and smectite in the alterations seems to correspond to the typical clay composition of the reported residual pedogenic soils by limestone weathering. The cryptocrystalline weathering product is partly altered to stilbite, a characteristic hydrothermal zeolite, in places, by the hydrothermal contact of late stage. The time of formation and infiltration of the supergene alterations seems to correspond to the stage just after the epithermal alteration of the Pungchon Limestone, i. e., an early Jurassic age. The supergene alteration, which may imply the stage of uplifting, weathering and erosion of the Chosun Supergroup, appears to have undergone at an oxygen-rich environment in descending water of meteoric origin by means of a chemical leaching and diffusion.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.133-144
• /
• 2004

Pre-reinforcement ahead of a tunnel face using long steel or FRP (Fiberglass Reinforced Plastic) pipes in NATM(New Austrian Tunnelling Method), known as the RPUM(Reinforced Protective Umbrella Method) or UAM (Umbrella Arch Method), is the promising method to sustain the stability of a shallow tunnel face and reduce the ground settlements. In addition, horizontal reinforcing of the face is recently emphasized to improve the stability of the face. However, the characteristics on longitudinal arching around the face have not yet been established quantitatively with the RPUM (crown-reinforcing) and/or the face horizontal reinforcing. In this study, therefore, the behavior of cohesionless soil around the face reinforced by the reinforcing member representing the RPUM and horizontal reinforcing is investigated through two-dimensional laboratory model tests. A series of tests were carried out on various conditions by changing lengths and angles of the reinforcing members. Based on the vertical pressure around the face, the characteristics of longitudinal arching have been found for the case of the non-reinforced and the reinforced.

• Journal of the Korean earth science society
• /
• v.23 no.3
• /
• pp.280-293
• /
• 2002

In this study, we analyzed the long-term distribution patterns of $CH_4$ determined from the Moo-Ahn (MAN) observatory in relation with those derived from the world major background monitoring sites. Comparison of the data were made using those data sets collected for the period between Aug. 1995 to Dec. 1991. The mean $CH_4$ concentration of MAN observatory was measured to be 1898${\pm}$85.3 ppb, recording the highest concentration of all the monitoring sites. When the concentration of $CH_4$ for different stations was compared over latitudinal scale, its concentration appeared to increase systematically as a function of latitude with an exception of MAN (and the other Korean monitoring site at Tae Ahn). Moreover, such phenomenon was more distinctive in Northern than Southern Hemisphere. According to the analysis of the monthly distribution patterns of $CH_4$ at MAN observatory, its concentration level began to increase from the months of February/March and peaked during August. In addition, when the level of oscillation in monthly concentrations (between the maximum and minimum values) was checked, differences were significant between MAN and other monitoring stations. If the rate of concentration change was checked using the data sets collected for this limited time period in terms of linear regression analysis, results for MAN showed the highest annual increasing rate of 16.5 ppb. It is hence suggested that the largest variability in the $CH_4$ distribution patterns at MAN observatory may be reflected by the high irregularity in its source/sink processes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.271-279
• /
• 2012

Total twenty cultivars of potato (Solanum tuberosum L.) were grown at Gangneung where is located in low land of Korea. Their tubers were harvested from 100 to 120 days after planting, and over 150 g of tubers were selected for quality evaluation. Dry matter, starch, amylose in starch, ascorbic acid, protein, individual sugars and mineral were analyzed and mealiness of cooked potatoes were also evaluated by panel test. Dry mater content was the highest in 'Haryeong', 'Jayoung' and 'Shepody', and the biggest starch granules were observed in 'Jayoung' and 'Sinnamjak'. In addition, the content of amylose was highest in 'Haryeong', 'Chudong' and 'Goun'. Mineral content showed the slight difference between cultivars, but it's tendency was not clear. Vitamin C content was highest in 'Jayoung' as 62.5 $mg{\cdot}100g^{-1}$ FW, and 'Chugang' exhibited the highest content of protein. Sugar content was lower in cultivars for single one than double cropping. The lowest sugar content was observed in 'Atlantic' and 'Namseo' among cultivars for single cropping, and in 'Goun' for double cropping. As a result of analysis for quality factors, we could select nine cultivars ('Atlantic', 'Gahwang', 'Gawon', 'Goun', 'Hareong', 'Irish Cobbler', 'Jasim', 'Jayoung' and 'Shepody') with high dry matter content and low reducing sugar as a cultivar group for processing. Additionally, seven cultivars ('Chugang', 'Gawon', 'Goun', 'Hareong', 'Irish Cobbler', 'Jasim' and 'Seohong') with high mealiness and amylose content and five cultivars ('Atlantic', 'Chudong', 'Gahwang', 'Jopung' and 'Jowon') with low mealiness and amylose content were classified as groups for boiled or steam cooking and for soup or pot dishes, respectively.

• Korean Journal of Food Science and Technology
• /
• v.5 no.4
• /
• pp.215-223
• /
• 1973

A potent citric acid producing strain was selected by an extensive screening test of the yeasts isolated from the various sources. These experiments were conducted to identify the selected strain and investigate the cultural conditions for citric acid production. The results obtained were as fellows: 1. The selected strain of yeast was identified to Hansenula anomala var. anomala by a taxnoomic study of Lodder. 2. The optimum conditions for citric acid production in the basal medium containing 10% glucose were: temperature $30^{\circ}C$, the concentration of $CaCO_3$ 3% and the velocity of oscillation 110 oscills/min. 3. As a nitrogen source ol the basal medium $NH_4Cl(0.1%)$ was the most effective for citric acid production. Organic nitrogen sources such as peptone were adequate for growth of the strain but not for citric acid production. 4. The most effective concentration of glucose was 10% in yield ratio of citric acid from sugar. 5. The addition of defatted rape seed, defatted perilla or defatted rice bran to the medium was effective for citric acid production. When 5% extract solution of defatted rape seed was added, the citric acid production was increased as much as 40% as compared with the case of adding yeast extract(0.2%). 6. The most effective concentration of $KH_2PO_4$ and $MgSO_4{\cdot}7H_2O$ in the medium(for citric acid Production) was 0.05% and 0.025% respectively. 7. Under the optimum cultural conditions, the growth of the strain was continued up to 5 days and the increase of citric acid production was continued up to 6 days, showing the yield ratio of 46% to glucose.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.318-329
• /
• 2014

In order to gain insight into the physiological responses of plants to high temperature stress, the effects of temperature on Chinese cabbage (Brassica campestris subsp. napus var. pekinensis cv. Detong) were investigated through analyses of photosynthesis and chlorophyll fluorescence under 3 different temperatures in the temperature gradient tunnel. Growth (leaf length and number of leaves) during the rosette stage was greater at ambient $+4^{\circ}C$ and ambient $+7^{\circ}C$ temperatures than at ambient temperature. Photosynthetic $CO_2$ fixation rates of Chinese cabbage grown under the different temperatures did not differ significantly. However, dark respiration rate was significantly higher in the cabbage that developed under ambient temperature relative to elevated temperature. Furthermore, elevated growth temperature increased transpiration rate and stomatal conductance resulting in an overall decrease of water use efficiency. The chlorophyll a fluorescence transient was also considerably affected by high temperature stress; the fluorescence yield $F_J$, $F_I$, and $F_P$ decreased considerably at ambient $+4^{\circ}C$ and ambient $+7^{\circ}C$ temperatures, with induction of $F_K$ and decrease of $F_V/F_O$. The values of RC/CS, ABS/CS, TRo/CS, and ETo/CS decreased considerably, while DIo/CS increased with increased growth temperature. The symptoms of soft-rot disease were observed in the inner part of the cabbage heads after 7, 9, and/or 10 weeks of cultivation at ambient $+4^{\circ}C$ and ambient $+7^{\circ}C$ temperatures, but not in the cabbage heads growing at ambient temperature. These results show that Chinese cabbage could be negatively affected by high temperature under a future climate change scenario. Therefore, to maintain the high productivity and quality of Chinese cabbage, it may be necessary to develop new high temperature tolerant cultivars or to markedly improve cropping systems. In addition, it would be possible to use the non-invasive fluorescence parameters $F_O$, $F_V/F_M$, and $F_V/F_O$, as well as $F_K$, $M_O$, $S_M$, RC/CS, ETo/CS, $PI_{abs}$, and $SFI_{abs}$ (which were selected in this study), to quantitatively determine the physiological status of plants in response to high temperature stresses.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.65-79
• /
• 2019

The study attempted to estimate the optimal facility capacity by combining renewable energy sources that can be connected with gas CHP in industrial complexes. In particular, we reviewed industrial complexes subject to energy use plan from 2013 to 2016. Although the regional designation was excluded, Sejong industrial complex, which has a fuel usage of 38 thousand TOE annually and a high heat density of $92.6Gcal/km^2{\cdot}h$, was selected for research. And we analyzed the optimal operation model of CHP Hybrid System linking fuel cell and photovoltaic power generation using HOMER Pro, a renewable energy hybrid system economic analysis program. In addition, in order to improve the reliability of the research by analyzing not only the heat demand but also the heat demand patterns for the dominant sectors in the thermal energy, the main supply energy source of CHP, the economic benefits were added to compare the relative benefits. As a result, the total indirect heat demand of Sejong industrial complex under construction was 378,282 Gcal per year, of which paper industry accounted for 77.7%, which is 293,754 Gcal per year. For the entire industrial complex indirect heat demand, a single CHP has an optimal capacity of 30,000 kW. In this case, CHP shares 275,707 Gcal and 72.8% of heat production, while peak load boiler PLB shares 103,240 Gcal and 27.2%. In the CHP, fuel cell, and photovoltaic combinations, the optimum capacity is 30,000 kW, 5,000 kW, and 1,980 kW, respectively. At this time, CHP shared 275,940 Gcal, 72.8%, fuel cell 12,390 Gcal, 3.3%, and PLB 90,620 Gcal, 23.9%. The CHP capacity was not reduced because an uneconomical alternative was found that required excessive operation of the PLB for insufficient heat production resulting from the CHP capacity reduction. On the other hand, in terms of indirect heat demand for the paper industry, which is the dominant industry, the optimal capacity of CHP, fuel cell, and photovoltaic combination is 25,000 kW, 5,000 kW, and 2,000 kW. The heat production was analyzed to be CHP 225,053 Gcal, 76.5%, fuel cell 11,215 Gcal, 3.8%, PLB 58,012 Gcal, 19.7%. However, the economic analysis results of the current electricity market and gas market confirm that the return on investment is impossible. However, we confirmed that the CHP Hybrid System, which combines CHP, fuel cell, and solar power, can improve management conditions of about KRW 9.3 billion annually for a single CHP system.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.354-364
• /
• 1983

Confonmation of (Z)-cinnamonitrile have been studied by molecular orbital theoretically using extended Huckel theory(EHT) and CNDO/2 molecular orbital calculation methods. The results indicate that the stability of conformation is(Z)-gauch>(Z)-planar. The rate constants for alkalie hydrolysis of cinnamonitrile at pH 7.0-14.0 range have been determined by ultra-violet spectrophotometry in 50% methanol at $25^{\circ}C$ and the following rate equation which can be applied over wide pH range was obtained; $${\therefore}k=({\frac{1.41{\times}10^{-14}+1.21{\times}10^7/[H_3O^+]}{2.65{\times}10^{-7}+1.64/[H_3O^+]})+9.14{\times}10^9/[H_3O^+]$$ The rate equation reveals that, at pH 7.0-10.0, the reaction is initiated by the addition of water molecule to unsaturated cabon-carhon double bond of cinnamonitrile and ${\alpha}C-{\beta}C$ bond scission follow subsequently in neutral and alkalie media. At pH 12.0-14.0, in strong alkalie solution, that so-called Michael type nucleophilic addition that the over-all rate constants is only dependent upon the concentration of hydroxide ion occurs competitively and are very complicated. Hence, the reaction mechanism of alkalie hydrolysis of cinnamonitrile which did not carefully before can be fully explained.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.10
• /
• pp.1545-1552
• /
• 2005

Sanguisorba officinalis L. has been used as a traditional remedy for arthritis, neuralgia, diarrhea, vomiting, gastric ulcer and gastro-intestinal disorders. This study was performed to investigate the protective effects of ethylacetate fraction of Sanguisorba officinalis L. ethanol extract (SOE) on the gastric mucosal damage and gastric ulcer induced by HCI-ethanol, indomethacin, Shay-ligation method, restraint and water-immersion stress, and cysteamine in rats. The experiment animals were divided into four groups: a negative control group (CON), positive control group (cimetidine 100 mg/kg-CMT or omeprazol 100 mg/kg administrated group-OMT), SOE 200 mg/kg administrated group (SOL) and SOE 400 mg/kg administrated group (SOH), respectively. Rats were given an oral or intraduodenal administration of SOE, and all SOE treatment groups compared with the CON significantly inhibited HCI-ethanol-induced acute gastritis and indomethacin-induced gastric ulcers in dose-dependent manner, of which effects were lower in a positive control drug (CMT). The inhibition rates ($\%$) on the acute gastritis induced by HCI-ethanol and the gastric ulcers induced by indomethacin in rats, 17.66$\%$ and 48.28$\%$ in SOL, 21.71$\%$, and 51.08$\%$ in SOH, and 47.26$\%$ and 58.26$\%$ in CMT compared with CON, respectively, In pylorus ligated rats, the groups of SOE showed decreases in the volume of gastric secretion and acid output. However, no significant differences were observed in the pepsin activity between treated groups . In addition, SOH also depressed gastric ulcers induced by restraint and water-immersion stress and duodenal ulcers induced by cysteamine. These results suggest that Sanguisorba officinalis L. has remarkable antigastric ulcer effects and could be developed as a new antigastric ulcer agents.