• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.116-123
• /
• 1997

A chemically stabilized $\beta$-cristobalite, which is stabilized by stuffing cations of $Ca^{2+}$ and $Al^{3+}$, was prepared by a solution-polymerization route employing Pechini resin or PVA solution as a polymeric carrier. The polymeric carrier affected the crystallization temperature, morphology of calicined powder, and particle size distribution. In case of the polyvinyl alcohol (PVA) solution process, a fine $\beta$-cristobalite powder with a narrow particle size distribution (average particle size : 0.3$\mu\textrm{m}$) and a BET specific surface area of 72 $\m^2$/g was prepared by an attrition-milling for 1 h after calcination at 110$0^{\circ}C$ for 1h. Wider particle size distribution and higher specific surface area were observed for the $\beta$-cristobalite powder derived from Pechini resin. The cubie(P1-to-tetraganalb) phase transformation in polynystalline $\beta$-cristobalite was induced at approximately 18$0^{\circ}C$. Like other materials showing transformation toughening, a critical size effect controlled the $\beta$-to-$\alpha$ transformation. Densifed cristobalite sample had some cracks in its internal texture after annealing. The cracks, occurred spontaneoulsy on cooling, were observed in the sample with an average grain sizes of 4.0 $\mu\textrm{m}$ or above. In case of the sintered cristobalite having a composition of CaO.$2Al_2O_3$.40SiO$_2$, small amount of amorphous phase and slow grain growth during annealing were observed. Shear stress-induced transformation was also observed in ground specimen. Cristobalite having a composition of CaO.2Al2O3.80SiO2 showed a more sensitive response to shear stress than the CaO.$2Al_2O_3$.40SiO$_2$ type cristobalite. Shear-induced transformation resulted in an increase of volume about 13% in $\alpha$-cristobalite phase on annealing for above 10 h in the case of the former composition.

• The Korean Journal of Ceramics
• /
• v.3 no.3
• /
• pp.208-212
• /
• 1997

Shear-induced phase transformation behavior of chemically stabilized $\beta$-cristobalite was studied by the fiber push-out technique. To obtain the critical grain size for phase transformation, the hot-pressed polycrystalline $\beta$-cristobalite, which was used as the interphase between fiber and matrix, was annealed at $1300^{\circ}C$ for 10h. Two types of fibers, mullite and sapphire fiber, were used in this study. Debonding between mullite fiber and cristobalite interphase occurred at a critical load of 230 MPa. Static friction and fiber sliding were continuously followed by debonding. Shear-induced transformation induced cracks in the cristobalite interphase at the debonding stage. In the case of the sapphire fiber, the debonding occurred at a lower load of 180 MPa due to the residual stress in the interface caused by the difference in thermal expansion coefficients between the fiber and the cristobalite interphase. The load was insufficient for shear-induced phase transformation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.658-664
• /
• 1997

The effect of metal oxides($K_2O, MgO, CaO,Al_2O_3$, and $TiO_2$) on the kinds of pure $SiO_2$ phase, and $SiO_2$ phases in the composition of vitreous porcelain body was investigated. Also, the effect of the ratio $SiO_2$ to $Al_2O_3$ in the composition of porcelain body with stabilized of cristobalite phase was investigated. In the case of the addition of $K_2O, MgO, CaO, Al_2O_3$, and $TiO_2$ to pure $SiO_2$, the major phase was $\alpha$-cristobalite, $\alpha$-cristobalite, $\alpha$-quartz, $\alpha$-quartz and amorphous, respectively. As the ratio of $SiO_2$ to $Al_2O_3$ in the composition of porcelain body was decreased, the stabilization of cristobalite phase was promoted and only the critical value of $SiO_2/Al_2O_3$ ratio that stabilizing the cristobalite phase in it was 68.10/22.75. The addition of $K_2$O, MgO, CaO,Al_2O_3$, and $TiO_2$ to the composition of porcelain body stabilized already did not affect on the formation of $\alpha$-cristobalite phase which degraded the thermal properties of porcelain body, and suppressed the formation of a, $\beta$-cristobalite.

• Journal of the Korean Ceramic Society
• /
• v.18 no.2
• /
• pp.79-82
• /
• 1981

SiC powder was heated in air over the temperature range of 1100-135$0^{\circ}C$. $\beta$-cristobalite was formed to cover the surfaces of SiC particles by the reaction: $SiC(s)+20_2(g)=SiO_2(s)+CO_2(g)$. It is assumed that the diffusion of oxygen ion through the formed surface layer of $\beta$-cristobalite controls the oxidation of the SiC particles. The diffusion coefficient of oxygen ion through the $\beta$-cristobalite layer was obtained as the following equation: $D=3.84{\times}10^{-17}$exp(-14.7/RT)

• Journal of the Korean Ceramic Society
• /
• v.17 no.4
• /
• pp.197-202
• /
• 1980

The oxidation mechanism of the not sintered pellets and sintered bodies of $Si_3N_4$ was investigated. in air over the temperature range of 800~130$0^{\circ}C$. The $\beta$-cristobalite was instantaneously formed and covered the particles of powder packed in the not sintered and weakly sintered porous $Si_3N_4$ bodies by molecular diffusion of oxygen through the porous Si3N4 bodies and an immediate oxidation. The diffusion of oxygen ion through the formed $\beta$-cristobalite surface layer is assumed to control the further oxidation of the $Si_3N_4$ particles of the porous $Si_3N_4$ bodies. The diffusion coefficients and activation energies of oxygen ion through the $\beta$-cristobalite layer were obtained by the use of a derived equation.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.521-526
• /
• 2007

Density functional calculations have been performed for the reactions of perfluoroalkylsilane and alkylsilane with silica surfaces. The (100) and (111) surfaces of ${\beta}-cristobalite$ are used as two possible models of the hydroxylated amorphous silica surface. This is the crystalline phase of silica with density and refractive index closest to those of amorphous silica. Moreover, two ${\beta}-cristobalite$ surfaces have the two types of silanol groups, namely the single silanols and the geminal silanols. We investigate the possible adsorption structure and formation energy of perfluoroalkylsilane and alkylsilane molecules with two type of silanol groups. The results will be compared with cluster and slab model.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.3
• /
• pp.99-105
• /
• 2018

In order to avoid un-uniform crystallization on the surface of a quartz glass crucible that is known to affect the production yield of the single crystal silicon, Ba (barium) was selected as a crystallization promotor and the inner surface of the crucible was coated using Ba (barium hydroxide octahydrate)-solution by the spray pyrolysis method. For un-coated crucible, it was found that the crystallization of its surface started at $1350^{\circ}C$, and at $1450^{\circ}C$ the surface was uniformly crystallized with ${\beta}$-cristobalite phase. It was found that the crucible coated with Ba began to be crystallized from $1000^{\circ}C$ and was uniformly crystallized on the crucible surface at $1300^{\circ}C$. In this case, ${\alpha}$-cristobalite and needle-shaped $BaSi_2O_5$ phase were created and disappeared as a crystal phase, and the ${\beta}$-cristobalite phase was eventually evenly distributed over the Ba-coated crucible surface.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.341-346
• /
• 1989

In order to evaluate the oxidation behavior of $\beta$-Sialon, $\beta$-Sialon ceramics was prepared from Si3N4, Al2O3, AlN and Y2O3 system. The specimens were oxidized in an oxygen atmosphere at 1, 20$0^{\circ}C$ for 9days. Oxidation behavior was evaluated by weight gain oxidation process, surface roughness. Microscopy, EDX and X-ray diffraction analysis were also used for the evaluation. The weight and surface roughness ofoxidized specimens were increased with increasing the oxidation time. Oxidized products were mullite, $\alpha$-cristobalite, yttrium aluminum oxide and yttrium silicate oxide.

• Journal of the Korean Ceramic Society
• /
• v.29 no.2
• /
• pp.127-135
• /
• 1992

It has been reported that natural petalite showed a low negative thermal coefficient and wide coefficient and wide coexisting region with liquid phase in Li2O-Al2O3-SiO2 system. Therefore, we investigated variation of microstructure and thermal and mechanical properties when the amount of SiO2 content in petalite compound and MgO addition to it compound were changed. As SiO2 content exceeded 80 wt%, crystal phases of $\beta$-cristobalite and $\beta$-spondumene solid solution were formed. Generally, the densification and bending strength were increased by the addition of MgO, but the positive thermal coefficient was found in the case of MgO 10 wt% addition because of second phase and glassy phase.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.151-163
• /
• 2000

A polymerized organic-inorganic complexation route is introduced for the synthesis of oxide ceramic powders. Polyvinyl alcohol was used as the organic carrier for precursor ceramic gel. Porous and soft powders, which have a high specific surface area, were obtained after calcinating the aerated precursors. The PVA content and its degree of polymerization had a significant influence on the homogeneity of the final powder. In particular, attrition milling process with the porous powder resulted in ultra-fine particles. In the case of the preparation of cordierite powder, nano-size powder, which has a high specific surface area of 181 ㎡/g, was obtained by the milling process. The complexation route was also applied to the synthesis of unstable phase in room temperature like beta-cristobalite, high temperature form of silica.