• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.398-403
• /
• 1987

A general theory of polymer adsorption at a semi-permeable oil-water interface of the biphasic solution is presented. The configurational factor of the solution in the presence of the semi-open boundary at the interface is evaluated by the quasicrystalline lattice model. The present theory gives the feature of the bulk concentration equilibria between oil-water subsystems and the surface excesses of ${\Gamma}^{\alpha}$ and ${\Gamma}^\{beta}$ of the polymer segments as a function of the degree of polymerization $\gamma$, the Flory-Huggins parameter in $\beta$-phase $x_{\rho}^{{\beta}_{\rho}}$, the differential adsorption energy parameter in $\beta$-phase $x_{\sigma}^{{\beta}_{\rho}}$, the differential interaction energy parameter ${\Delta}x_{\rho}$ and the bulk concentration of the polymer in ${\beta}-phase ${\varphi}_2^{{\beta(*)}_2}$. From our numerical results, the characteristics of ${\Gamma}^{\alpha}$ are shown to be significantly different from those of ${\Gamma}^{\beta}$ in the case of high polymers, and this would be the most apparent feature of the adsorption behavior of the polymer at a semi-permeable oil-water interface, which is sensitively dependent on ${\Delta}x_{\rho}$ and r.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.383-388
• /
• 2004

This paper presents the aerodynamic coefficient modeling with a new model structure explored by Least Squares using Modulating Function Technique (LS/MFT) for an F-16XL airplane using wind tunnel data supplied by NASA/LRC. A new model structure for aerodynamic coefficient was proposed, one that considered all possible combination terms of angle of attack ${\alpha}$(t) and ${\alpha}$(t) given number of harmonics K, and was compared with Pearson's model, which has the same number of parameters as the new model. Our new model harmonic results show better agreement with the physical data than Pearson's model. The number of harmonics in the model was extended to 6 and its parameters were estimated by LS/MFT. The model output of lift coefficient with K=6 correspond reasonably well with the physical data. In particular, the estimation performances of four aerodynamic coefficients were greatly improved at high frequency by considering all harmonics included in the input${\alpha}$(t), and by using the new model. In addition, the importance of each parameter in the model was analyzed by parameter reduction errors. Moreover, the estimation of three parameters, i.e., amplitude, phase and frequency, for a pure sinusoid and a finite sum of sinusoids- using LS/MFT is investigated.

• 정보관리학회지
• /
• 제32권2호
• /
• pp.7-23
• /
• 2015

네트워크 분석이 확산되면서 매개중심성이나 연결정도중심성과 같은 다양한 중심성 지수가 개발되어 활용되고 있으나, 가중 네트워크에서 지역중심성을 측정할 수 있는 지수로는 최근접이웃중심성 이외에는 거의 알려져 있지 않다. 이 연구에서는 가중 네트워크를 위한 일반화된 지역중심성 지수인 이웃중심성 지수를 새롭게 제안한다. 이웃중심성 지수는 파라미터 ${\alpha}$를 사용하여 이진 네트워크를 위한 연결정도중심성 지수와 가중 네트워크를 위한 최근접이웃중심성 지수를 일반화한 것이다. 6가지 실제 네트워크 데이터를 대상으로 하여 제안된 지수의 특징과 적정 파라미터 값을 살펴보는 실험을 수행하고 결과를 보고하였다.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.46-52
• /
• 2001

In this paper, the real-time prediction of high temperature creep life was carried out for the friction welded joints of dissimilar heat resisting steels (SUH3-SUH35). various life prediction method such as LMP (Larson_miller Parameter) and ISM (initial strain method) were applied. The creep behaviors of those steels and the welds under static load were examined by ISM combined with LMP at 500, 600 and $700^{\circ}C$, and the relationship between these two methods was investigated. A real-time creep lie (tr, hr) prediction equation by initial strain (${\varepsilon}_0$, %) under any creep stress ($\sigma$, MPa) at any high temperature (T, K) was developed as follows: $t_r={\alpha}{\varepsilon}_0^{\beta}{\sigma}^{-1}$ where, ${\phi}=16: {\alpha}=10^{51.412-0.104T+5.375{\times}10^5T^2}$, $ {\beta}=-83.989+0.180T-9.957{\times}10^{-5}T^2,{\phi}=20:$ ${\alpha}=10^{69.910-0.146T+7.744{\times}10^{-5}T^2$, ${\beta}=-51.442+0.105T-5.595{\times}10^{-5}T^2$ for SUH3-SUH35 friction weld of =16mm and 20mm, respectively.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1996년도 Advance Program of 13th optics andquantum Electronics conference, 1996제13 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.96-96
• /
• 1996

• BMB Reports
• /
• 제44권2호
• /
• pp.118-122
• /
• 2011

Most widely used secondary structure assignment methods such as DSSP identify structural elements based on N-H and C=O hydrogen bonding patterns from X-ray or NMR-determined coordinates. Secondary structure assignment algorithms using limited $C{\alpha}$ information have been under development as well, but their accuracy is only ~80% compared to DSSP. We have hereby developed SABA (Secondary Structure Assignment Program Based on only Alpha Carbons) with ~90% accuracy. SABA defines a novel geometrical parameter, termed a pseudo center, which is the midpoint of two continuous $C{\alpha}s$. SABA is capable of identifying $\alpha$-helices, $3_{10}$-helices, and $\beta$-strands with high accuracy by using cut-off criteria on distances and dihedral angles between two or more pseudo centers. In addition to assigning secondary structures to $C{\alpha}$-only structures, algorithms using limited $C{\alpha}$ information with high accuracy have the potential to enhance the speed of calculations for high capacity structure comparison.

• Korean Journal of Mathematics
• /
• 제21권4호
• /
• pp.429-437
• /
• 2013

Let $X_1$, $X_2$, ${\cdots}$, $X_n$ be independent and identically distributed random variables having common exponential density with unknown mean ${\mu}$. In the sequential confidence interval estimation for the exponential hazard rate ${\theta}=1/{\mu}$, when the loss function is strictly convex, the following stopping rule is proposed with the half length d of prescribed confidence interval $I_n$ for the parameter ${\theta}$; ${\tau}$ = smallest integer n such that $n{\geq}z^2_{{\alpha}/2}\hat{\theta}^2/d^2+2$, where $\hat{\theta}=(n-1)\bar{X}{_n}^{-1}/n$ is the minimum risk estimator for ${\theta}$ and $z_{{\alpha}/2}$ is defined by $P({\mid}Z{\mid}{\leq}{\alpha}/2)=1-{\alpha}({\alpha}{\in}(0,1))$ Z ~ N(0, 1). For the confidence intervals $I_n$ which is required to satisfy $P({\theta}{\in}I_n){\geq}1-{\alpha}$. These estimated intervals $I_{\tau}$ have the asymptotic consistency of the sequential procedure; $$\lim_{d{\rightarrow}0}P({\theta}{\in}I_{\tau})=1-{\alpha}$$, where ${\alpha}{\in}(0,1)$ is given.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.37-47
• /
• 2006

도시화로 인한 유출량의 증가 및 도달시간의 단축은 도시재해의 한 원인이 되고 있다. 이를 막기 위하여 도시 배수유역내에 저류지를 설치하여 하수관거의 통수능 이하로 방류량을 조절하는 방안을 고려할 수 있다. 기초계획 단계에서의 저류지 설계를 위해서는 복잡한 연관성을 지니고 있는 제반 변수를 고려하지 않고 대표적인 관련 주요변수를 택하여 저류용량을 결정하는 여러 가지 저류지 계획모형이 이용되고 있다, 기왕의 저류지 계획모형에서는 주로 도시화 특성인자인 첨두유량비$(\alpha)$와 도달시간비$(\gamma)$를 활용하고 있다. 본 연구에서는 재해영향평가서 22개소의 저류지를 분석대상으로 하여 도시화에 따른 도시배수유역 특성인자와 저류지 특성인자간의 분석을 통해 저류지의 계획단계에서 활용할 수 있도록 편의성을 도모하고자 한다. 첨두유량비 $\alpha$가 도달시간비 $\gamma$보다 저류 용량에 미치는 영향이 더욱 민감함을 알 수 있었으며, 개발전 후의 유출계수비 $\beta$가 설계강우강도의 지역계수 n값 보다 $\alpha$에 미치는 영향이 작음을 알 수 있었다. 사다리꼴 설계수문곡선을 사용하는 경우에는 강우지속기간이 저류비에 미치는 영향이 큰 것을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.759-762
• /
• 2006

A simple SPICE model for the description of the on-current of low-temperature poly-silicon thin film transistors is proposed. By employing constant mobility, $V_GS$ dependent alpha parameter, and exponential kink effect, very good agreements between the model and measurement were obtained.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.641-645
• /
• 2019

Experimental equipment for studying the sorption properties of iodine sorbents using radioactive methyliodide has been developed. The sorption capacity index ${\alpha}$ is proposed as a criterion parameter for assessing the quality of impregnated activated charcoals. It was found that this parameter does not depend on the dynamic conditions during the sorbent test. It was shown that values of the sorption capacity index allow to recommend iodine sorbents for industrial gas cleaning processes.