• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2585-2592
• /
• 2015

The purpose of this study was to evaluate the shear bond strength between metal core fabricated by 3D printing and dental porcelain. Thirty metal cores were fabricated(cast 15ea, 3D printing 15ea). The porcelain for each group was builded to the metal core. Sample was loaded to shear force(crosshead speed 1mm/min) in a universal material testing machine. The fracture samples were analyzed failure aspect. The means were statistical analyzed using by Mann-whitney test(${\alpha}=0.05$). The period of experimental(metal cores fabrication, dental porcelain build up, data analysis, statistical analysis, failure aspect analysis and others) for this study took six months. The $mean{\pm}SDs$ of shear bond strength was $50.14{\pm}1.60MPa$ for the cast group, and $54.36{\pm}3.18MPa$ for the 3D printing group(p=0.035). The failure aspect showed mixed failure. As a results, metal cores fabricated by 3D printing method were clinically acceptable range.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.68-74
• /
• 2013

For the coating of diamond films on WC-Co tools, a buffer interlayer is needed because Co catalyzes diamond into graphite. W and Ti were chosen as candidate interlayer materials to prevent the diffusion of Co during diamond deposition. W or Ti interlayer of $1{\mu}m$ thickness was deposited on WC-Co substrate under Ar in a DC magnetron sputter. After seeding treatment of the interlayer-deposited specimens in an ultrasonic bath containing nanometer diamond powders, $2{\mu}m$ thick nanocrystalline diamond (NCD) films were deposited at $600^{\circ}C$ over the metal layers in a 2.45 GHz microwave plasma CVD system. The cross-sectional morphology of films was observed by FESEM. X-ray diffraction and visual Raman spectroscopy were used to confirm the NCD crystal structure. Micro hardness was measured by nano-indenter. The coefficient of friction (COF) was measured by tribology test using ball on disk method. After tribology test, wear tracks were examined by optical microscope and alpha step profiler. Rockwell C indentation test was performed to characterize the adhesion between films and substrate. Ti and W were found good interlayer materials to act as Co diffusion barriers and diamond nucleation layers. The COFs on NCD films with W or Ti interlayer were measured as less than 0.1 whereas that on bare WC-Co was 0.6~1.0. However, W interlayer exhibited better results than Ti in terms of the adhesion to WC-Co substrate and to NCD film. This result is believed to be due to smaller difference in the coefficients of thermal expansion of the related films in the case of W interlayer than Ti one. By varying the thickness of W interlayer as 1, 2, and $4{\mu}m$ with a fixed $2{\mu}m$ thick NCD film, no difference in COF and wear behavior but a significant change in adhesion was observed. It was shown that the thicker the interlayer, the stronger the adhesion. It is suggested that thicker W interlayer is more effective in relieving the residual stress of NCD film during cooling after deposition and results in stronger adhesion.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.195-201
• /
• 1999

C-axis oriented $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) thin films were grown on $Al_2O_3$ (alumina and R-plane sapphire) substrates by a pulsed laser deposition method. The crystallinity of the $CeO_2$ buffer layer on sapphire substrate exhibit a strong dependence on the deposition temperature, resulting in the growth of a-axis orientation at $800^{\circ}C$. The superconducting properties of YBCO thin films on $Al_2O_3$ substrates showed strong dependence on both thickness and crystallinity of the $CeO_2$ buffer layer. Critical temperature of YBCO film on alumina substrate was ${\sim}83\;K$. In the case of R-plane sapphire substrate,

• Journal of Embryo Transfer
• /
• v.27 no.4
• /
• pp.229-235
• /
• 2012

This research was investigated the relationship, in high-producing Holstein donor cows, between the number of the transferable embryos and the blood serum concentrations of Blood Urea Nitrogen (BUN), glucose and cholesterol, which affect the nutritional state of cows. CIDRs were inserted into the vaginas of twenty two heads of Holstein cows, regardless of estrous cycle. Superovulation was induced using folliclar stimulating hormone (FSH). For artificial insemination, donor cows were injected with $PGF_{2{\alpha}}$ and estrus was checked about 48 hours after the injection. Then they were treated with 4 straws of semen 3 times, with 12-hour intervals. Embryos were collected by a non-surgical method 7 days after the first artificial insemination. The total numbers of ova collected from 3 experimental groups whose blood BUN concentrations were <10 mg/dl, 11~18 mg/dl and ${\geq}19$ mg/dl were 8.9, 12.5 and 19.0, respectively; whereas the numbers of transferable embryos were 5.8 + 1.9, 7.9 + 2.8 and 5.2 + 1.4, respectively. When glucose concentration was <60 mg/dl, the total number of collected ova was 9.9, which was smaller than when the concentration was 60~70 mg/dl or ${\geq}70$ mg/dl. When glucose concentration was 60~70 mg/dl, the number of transferable embryos was 7.1 + 2.4, which was slightly larger than the numbers 6.4 + 2.1 and 6.1 + 1.7 that were obtained when the concentrations were <60 mg/dl and ${\geq}70$ mg/dl, respectively ; however, the differences were not significant (p>0.05). When cholesterol concentrations were <150 mg/dl, 150~200 mg/dl and ${\geq}200$ mg/dl, the total numbers of collected ova were 11.2, 11.3 and 8.6, respectively. Whereas the numbers of transferable embryos were 7.1 + 2.1, 7.3 + 1.9 and 5.6 + 1.3, respectively ; however, the differences were again not significant (p>0.05). The result of this research showed no significant difference in ovum recovery rate and the number of transferable embryos according to major metabolite concentrations in high-producing Holstein donor cows. However, it is considered that the failure of maintaining proper nutritional status would cause the fall in in vivo embryo productivity.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.616-625
• /
• 2005

It is likely that maltose could provide a good substrate for the bacteria in the intestine, when the pathogenic bacteria invade and colonize in human gut. For better understanding of this organism's maltose metabolism, a mutant that was not able to grow with maltose as a sole carbon source was screened from a library of mutants constructed by a random transposon mutagenesis. By a transposon-tagging method, malPQ genes encoding a maltodextrin phosphorylase and a 4-${\alpha}$-glucanotransferase, were identified and cloned from Vibrio vulnificus. The deduced amino acid sequences of malPQ from V. vulnificus were 48 to $91\%$ similar to those of MalP and MalQ reported from other Enterobacteriaceae. Functions of malPQ genes were assessed by the construction of mutants whose malPQ genes were inactivated by allelic exchanges. When maltose was used as the sole carbon source, neither malP nor malQ mutant was able to grow to a substantial level, revealing that the MalP and MalQ are the only enzymes for metabolic utilization of maltose. The malQ mutant exhibited decreased adherence toward intestinal epithelial cells in vitro, but there was no difference in the $LD_{50}s$ of the wild-type and the malQ mutant in mice. Therefore, it appears that MalQ is less important in the pathogenesis of V. vulnificus than would have been predicted by considering maltose as a most common sugar in the intestine, but not completely dispensable for virulence in mice.

• Korean Journal of Acupuncture
• /
• v.25 no.3
• /
• pp.147-166
• /
• 2008

Objectives : Crohn's disease (CD) is characterized by a chronic relapsing inflammation of the bowel in which proinflammatory cytokines play an important perpetuating role. Methods : Mice (preventive animal model of gliotoxin) were treated with 5 % 2,4,6-trinitrobenzenesulfonic acid (TNBS) at day 1 and day 7. To investigate preventive effects of acupuncture with Gujin at $LI_{11}$, acupuncture was carried out at day -1, day 1, day 3. And, to investigate therapeutic effects, acupuncture with Gujin was carried out at day 3, day 5, day 7. For the data analysis, we checked weight and width of colon, diarrhea, edema, survival rate, changes of body weight, and myeloperoxygenase (MPO) activity. For analysing protein expression, we carried out immunohistochemical staining and Western blot and we analyzed mRNA expression by RT-PCR. Results : Colon of TNBS treated mice was erosive and shortening compared with the colon of control mice and induced damages of colon epithelial cell layer and induced infiltration of immune cells in all layer of colon. Acupuncture of gujin at $LI_{11}$ in preventive mode suppressed macorscopic damages such as erosive and shortening of colon by TNBS and damages of intestinal epithelial cells and infiltration of immune cells in the colon. The average weight of 5 cm distal colon was increased in TNBS treated mice (758${\mu}g$) compared with in control mice (112${\mu}g$) and width of distal colon was also increased in TNBS treated mice (4.9mm) compared with in control mice (1.3mm). Acupuncture with Gujin at $LI_{11}$ in preventive and therapeutic mode suppressed increase of colon weight and width by TNBS. TNBS induced edema of colon and diarrhea and Acupunctured with Gujin at $LI_{11}$ in preventive and therapeutic mode ameliorated these symptom by TNBS. In preventive and therapeutic mode, the effects of acupuncture with Gujin at $LI_{11}$ were increasing the motility, suppressing body weight decreasing, suppressing MPO activity, reducing expressing of TNF-${\alpha}$, IL-1b, and ICAM-1 in colon compared with that by TNBS Conclusions : This study demonstrates that acupuncture with Gujin at $LI_{11}$ represents a potential therapeutic method of Crohn's disease.

• Journal of Life Science
• /
• v.21 no.3
• /
• pp.424-434
• /
• 2011

The purpose of this study was to examine the effects of a physical activity program on body composition, depression and risk factors of dementia in elderly women. Subjects were 40 women aged 65~75 years, classified into two groups (experiment group 20, control group 20). The factors measured in this study were body composition (weight, percent body fat, body mass index, body fluid), depression (BDI score) and risk factors of dementia (K-MMSE, LDL-C, HDL-C, insulin, ${\beta}$-amyloid, DHEAs) at 12 and 24 weeks before and after the program. Subjects of experiment group participated in a 24 week physical activity program (45~60 min, 3~4 day per weeks). Data were analyzed by repeated ANOVA method of SPSS, with accepting levels for all significances above ${\alpha}$=0.05. The results of this study were as follows. In body composition, the experiment group showed significant differences in the weight, percent body fat and body mass index compared to the control group. In depression score, the experiment group showed no significant differences regarding BDI score level compared to the control group. In risk factors for dementia, the experiment group showed significant differences in levels of K-MMSE, LDL-C, HDL-C, insulin, ${\beta}$-amyloid, and DHEAs compared to the control group. This study showed that a 24 week physical activity program had positive effects on almost all of the factors evaluated in elderly women, and that elderly women who did not participate in the program experiences no such positive effects. Therefore, regular participation in a physical activity program could be advocated as one strategy to enhance body fat, depression, and risk factors of dementia and may result in improving risk for diseases of age in elderly women.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.591-600
• /
• 2006

Purpose: This study assessed the impact of self-reported periodontal health on the oral health-related quality of life among elderly Koreans. Methods: Four hundred twenty one elderly Koreans in Seoul and suburban areas were selected with a cluster (institution) sampling method, and were requested to take oral examinations and finish questionnaires on the Oral Health Impact Profile-14(OHIP-14). and self-reported periodontal health status, such as periodontal symptoms, self-rated periodontal health and periodontal treatment need. As the dependent variable, OHIP-14 showed a positive skewed distribution (skewness: 1.17), we transformed to square-root form to apply parametric analyses. Bivariate analysis by t-test and ANOVA, and multivariate analysis with the two-level regression model accounting clusters were implemented. Results: Mean age of the subjects was 74.6 years and 66.5% were women. Fourteen items of OHIP-14 were summarized to one factor explaining 78.6% of total variance and produced the Chronbach alpha coefficient of 0.92. Results from the multivariate model, adjusting for age, sex, type of institutions, ability to pay, and number of teeth present, showed significantly lower OHIP-14 with reporting less than 3 periodontal symptoms (p(O.OOO1), rating their own periodontal health as above average level (p=O.0144), and thinking they don't need any periodontal treatments in the near future (p=O.0148), than their counterparts. The intraclass-corrrelation estimated by the final model was 0.028. Conclusion: This study demonstrates a significant association between self-reported periodontal health status and the oral health-related quality of life.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.644-652
• /
• 2007

Statement of problem: Resonance frequency analysis is evaluated as the non-invasive and objective method for the evaluation of implant stability and has been increasingly used. It is necessary to evaluate the factors affect the ISQ measurement stability. Purpose: This study was performed to evaluate the effect of the autoclave sterilization and reuse of $Smartpeg^{TM}$ on ISQ measurement. Material and methods: $SmartPeg^{TM}$ (Integration Diagnostics Ltd., $G\ddot{o}teborg$, Sweden) of autoclave group (A) was autoclave sterilized 9 times and $Smartpeg^{TM}$ of reuse group (R) was reused 9 times. Ten $SmartPeg^{TM}s$ were allocated to each group and after each autoclave sterilization and reuse, implant stability quotient (ISQ) values were measured 3 times from the two directions a and b at a right angle. $Osstell^{TM}$ mentor (Integration Diagnostics Ltd. $G\ddot{o}teborg$, Sweden) was used and type 1 (article no. 100353) $Smartpeg^{TM}$ was selected according to $Smartpeg^{TM}$ reference list. Osstem Implant US II future (Osstem Co., Seoul, Korea) in $4.0mm{\times}11.5mm$ was embedded in the self-curing acrylic resin ($Orthojet^{(R)}$, Lang Dental, U.S.A.). Data was statistically analyzed by one-way ANOVA $({\alpha}=.05)$ and scheffe test was done where a significant difference exist. Correlation test was also done between ISQ value and the number of autoclave sterilization or reuse. Results: 1. In autoclave group, the means and sd. of ISQ value before autoclave sterilization were $84.97{\pm}0.41,\;84.93{\pm}0.74$ at direction a and b. There was significant differences between autoclave groups at direction a and b (P=.000). 2. In reuse group, the means and sd. of ISQ value before reuse were $85.40{\pm}0.62,\;85.50{\pm}0.57$ at direction a and b. There was no significant difference between reuse groups at direction a and b (P>.05). 3. There was a weak positive correlation between the number of reuse and ISQ value at direction a and b (${\gamma}=.207$ and .246, P<.01). Conclusion: Within the limitations of this study, the following conclusions were drawn. Till ninth reuse of $Smartpeg^{TM}$, the ISQ measurement stability did not be affected. After twice autoclave sterilization of $Smartpeg^{TM}$ the ISQ measurement stability was affected.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.601-610
• /
• 2007

Statement of problem: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. Purpose: This study characterized the effect of titanium-ceramic adhesion after gold and TiN coating on cast and wrought titanium substrates. Material and method: Six groups of ASTM grade II commercially pure titanium and cast titanium specimens$(13mm{\times}13mm{\times}1mm)$ were prepared(n=8). The conventional Au-Pd-In alloy served as the control. All specimens were sandblasted with $110{\mu}m\;Al_2O_3$ particles and ultrasonically cleaned for 5min in deionized water and dried in air before porcelain firing. An ultra-low-fusing dental porcelain (Vita Titankeramik) was fused on titanium surfaces. Porcelain was debonded by a biaxial flexure test at a cross head speed of 0.25mm/min. The excellent titanium-ceramic adherence was exhibited by the presence of a dentin porcelain layer on the specimen surface after the biaxial flexure test. Area fraction of adherent porcelain (AFAP) was determined by SEM/EDS. Numerical results were statistically analyzed by one-way ANOVA and Student-Newman-Keuls test at ${\alpha}=0.05$. Results: The AFAP value of cast titanium was greatest in the group 2 with TiN coating, followed by group 1 with Au coating and the group 3 with $Al_2O_3$ sandblasting. Significant statistical difference was found between the group 1, 2 and the group 3 (p<.05). The AFAP value of wrought titanium was greatest in the group 5 with TiN coating, followed by the group 4 with Au coating and the group 6 with $Al_2O_3$ sandblasting. Conclusion: No significant difference was observed among the three groups (p>.05). The AFAP values of the cast titanium and the wrought titanium were similar. However the group treated with $Al_2O_3$ sandblasting showed significantly lower value (p<.05).