• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.90-98
• /
• 2002

The effects of swirl and combustion parameters on the performance and emission in a turbo-charged D.I. diesel engine of the displacement 9.4L were studied experimentally in this paper. Generally the swirl in the combustion process of diesel engine promotes mixing of the injection fuel and the intake air. It is a major factor to improve the engine performance because the fuel consumption and NO$_{x}$ is trade-off according to the high temperature and high pressure of combustion gas in a turbocharged D.I. diesel engine, it's necessary to thinking over the intake and exhaust system, the design of combustion bowl and so on. In order to choose a turbocharger of appropriate capacity. As a result of steady flow test, when the swirl ratio is increased, the mean flow coefficient is decreased, whereas the gulf factor is increased. Also, through engine test its can be expected to meet performance and emissions by optimizing the main parameter's; the swirl ratio is 2.43, injection timing is BTDC 13$^{\circ}$ CA, compression ratio is 16, combustion bowl is re-entrant 5$^{\circ}$, nozzle hole diameter is $\Phi$0.28*6, turbocharger is GT40 model which are compressor A/R 0.58 and turbine A/R 1.19.

• Journal of Aquaculture
• /
• v.11 no.1
• /
• pp.105-111
• /
• 1998

For ecological studies on the habitat of geoduck clam, Panope japonica caught at the coastal water of Kangwon province located in the East of Korea. The annual water temperature of the geoduck's fishing grounds was ranged from 5.6 to $17.5^{\circ}C.$. The salinity was not so fluctuated showing from 32.27 to 34.22${\textperthousand}$, and dissolved oxygen was ranged 5.51 to 7.27 ml/l. Sediments where geoduck was distributed chiefly was consisted of very fine sands of 3.0 to 4.0 phi (49.2%) and find sand of 2.0 to 3.0 phi scale (31.87%). The shell length of geoduck was measured 70 to 135 mm (mean : 107.70mm) and the weight was 50 to 550g (mean : 299.63g). The total weight (TW) against the shell length (SL) could expressed as the regression equation as TW=$1.4446{\times}10^{-3}SL^{2.6067}$.

• Solar Energy
• /
• v.11 no.2
• /
• pp.63-69
• /
• 1991

A Steady laminar natural convection heat transfer from two isothermal square beams attached to a vertical adiabatic plate has been studied numerically. The results have been obtained for dimensionless beam spacings, $0.5{\le}D/L{\le}3.0$, and for Gr=5000-10000 at ${\phi}_2/{\phi}_1=1.0$. 1. The local Nusselt number from the beam surface is increased with the dimension-less beam spacing D/L. but that of the downward surface of the lower beam is almost same as the D/L increases. And, the local Nusselt number from the upward surface of a lower beam is greatly increased with D/L. 2. The beam spacings of the maximum mean Nusselt number for the downward surface of an upper beam and the upward surface of a lower beam occur at. D/L =2.6 and 2.0 respectively. 3. The beam spacing for the maximum total mean Nusselt number occurs at D/L = 2.6.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2010

The reaction of N,N-diethyl carbamates of 1H-[1,2,3]triazolo[4,5-b]pyridin-1-ol (4-HOAt) 7, 3H-[1,2,3]triazolo[4,5-b]pyridin-3-ol (7-HOAt) 8, 1H-benzo[d][1,2,3]triazol-1-ol (HOBt) 9, 6-chloro-1H-benzo[d][1,2,3]triazol-1-ol (Cl-HOBt) 10, 6-(trifluoromethyl)-1H-benzo[d][1,2,3]triazol-1-ol ($CF_3$-HOBt) 11, and 6-nitro-1H-benzo[d][1,2,3]triazol-1-ol ($NO_2$-HOBt) 12 with morpholine and piperidine in $CH_3CN$ underwent acyl nucleophilic substitution to give the corresponding carboxamide derivatives. The reactants and products were identified by elemental analysis, IR and NMR. We measured the kinetics of these reactions spectrophotometrically in $CH_3CN$ at a range of temperatures. The rates of morpholinolysis and piperidinolysis were found to fit the Hammett equation and correlated with $\sigma$-Hammett values. The values were 1.44 - 1.21 for morpholinolysis and 1.95 - 1.72 for piperidinolysis depending on the temperature. The $Br{\phi}$nsted-type plot was linear with a $\beta_lg = -0.49 \pm 0.02$ and $-0.67 \pm 0.03$. The kinetic data and structure-reactivity relationships indicate that the reaction of 9-12 with amines proceeds by a concerted mechanism. The deviation from linearity of the correlation ${\Delta}H^#$ vs. ${\Delta}S^#$ and plot of $logk_{pip}$ vs. $logk_{morph}$ and $Br{\phi}$nsted-type correlation indicate that the reactions of amines with carbamates 7 and 8 is attributed to the electronic nature of their leaving groups.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.87-96
• /
• 2006

Although bytecode has many good features, it has slow execution speed and it is not an ideal representation for program analysis or optimization. For analysises and optimizations. bytecode must be translated to a Static Single Assignment Form(SSA Form) But when bytecode is translated a SSA Form it has lost type informations of son variables. For resolving these problem in this paper, we create extended control flow graph on bytecode. Also we convert the control flow graph to SSA Form for static analysis. Calculation about many informations such as dominator, immediate dominator. dominance frontier. ${\phi}$-Function. renaming are required to convert to SSA Form. To obtain appropriate type for generated SSA Form, we proceed the followings. First. we construct call graph and derivation graph of classes. And the we collect information associated with each node. After finding equivalence nodes and constructing Strongly Connected Component based on the collected informations. we assign type to each node.

• Animal cells and systems
• /
• v.11 no.1
• /
• pp.39-50
• /
• 2007

Tau plays a role in numerous neuronal processes, such as vesicle transport, microtubule-plasma membrane interaction and intracellular localization of proteins. SUMO (Small Ubiquitin-like Modifier) modification (SUMOylation) appears to regulate diverse cellular processes including nuclear transport, signal transduction, apoptosis, autophagy, cell cycle control, ubiquitin-dependent degradation, as well as gene transcription. We noticed that putative SUMOylation site is localized at $^{340}K$ of $Tau(^{339}VKSE^{342})$ with the consensus sequence information (${\Phi}KxE$ ; where ${\Phi}$ represents L, I, V or F and x is any amino acid). In this report, we demonstrated that $^{340}K$ of Tau is the SUMOylation site and that a point mutant of Tau S214E (an analog of the phospho $^{214}S$ Tau) promotes its SUMOylation at $^{340}K$ and its nuclear or nuclear vicinity localization, by co-immunoprecipitation and confocal microscopy analysis. Further, we demonstrate that the Tau S214E (neither Tau S214A nor Tau K340R) mutant increases its protein stability. However, the SUMOylation at $^{340}K$ of Tau did not influence cell survival, as determined by FACS analysis. Therefore, our results suggested that the phosphorylation of Tau on $^{214}S$ residue promotes its SUMOylation on $^{340}K$ residue and nuclear vicinity localization, and increases its stability, without influencing cell survival.

• Parasites, Hosts and Diseases
• /
• v.33 no.4
• /
• pp.377-382
• /
• 1995

Three-week-old ICR SPF mice were orally inoculated with one of 5 doses ranging from $2{\;}\times{\;}10^2{\;}to{\;}2{\;}\times{\;}10^6$ oocysts of Crwptosporidium tsuris (strain MCR) per mouse. Oocyst inoculation was directly proportional to the amount of oocysts shed and was inversely proportional to the period required for peals oocyst production and to the prepatent period. Peak oocyst production occurred between fifteen and thirty-one days with a patent period from 61 to 64 days. Three days after all mice stopped shedding oocysts, they were orally challenged with a single dose of $2{\;}\times{\;}10^6$ oocysts or the same species. Marked seroconversion for IgG antibody accompanied recovery from mice inoculated with $5{\;}\times{\;}10^5$ oocysts. Mice administered with carrageenan excreted a small number of oocysts for 49.0 days on the average after challenge inoculation (ACI) and control mice for 14.2 days in a dose-independent fashion. Just before challenge infection, phagocytic activity of peritoneal macrophages ($M{\phi}$) and the number of peripheral $M{\phi}$ were dramatically decreased. Mild challenge infection implies that the immunogenicity of C. nuris (strain MCR) is very strong, despite $M{\phi}$ blocker carrageenan administration.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.28-35
• /
• 2002

A study on the grinding characteristics of metal components in printed circuit boards (PCBs) scrap by a swing-hammer typeimpact mill was conducted. The PCBs scrap crushed to sizes less than 3 mm were pulverized to liberate metal components by the impact mill. The effect of rotation speed of hammer on the grinding characteristics was investigated. The particle size distribution and degree of liberation of metals such as copper and solder were measured. The effect of rotation speed and particle size on the shape sorting of metal Particles from milled PCBs was investigated using an inclined vibrating Plate. At the hammer speed of 61.3 m/s about 80% of the copper particles became larger than 297 $\mu$m while 90% of solder particles was smaller than 297 $\mu$m. In the shape sorting method, the recovery location becomes shorter as the rotation speed of hammer increases. The recovery location for particles larger than 297$\mu$m was shorter than for particles sized between 149$\mu$m and 297$\mu$m. As the recovery location becomes shorter, KI value increases towards unity while $\phi_{c}$ value decreases towards unity indicating the more roundness of metal particles.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.13-13
• /
• 2009

현재 열간단조 금형을 제작함에 있어 육성용접을 실시하는 방법이 금형강 STD61, STD11 등으로 제작하는 방법에 비해 보수나 비용적인 측면에서 이점을 가지고 있기 때문에 점차적으로 증가하고 있는 추세이다. 열간단조 공정에서 금형은 $1000^{\circ}C$이상의 고온재료와 반복접촉하게 된다. 이때 이형제의 사용은 급속냉각 및 급속가열의 열피로를 가속시킨다. 또한, 금형은 반복충격에 의한 기계적 피로를 받게 된다. 이러한 금형의 사용환경을 고려한 FCW는 종래 고가의 $2.8{\sim}3.2{\Phi}$인 외국산 FCW를 사용하였으나 이를 대체한 $3.2{\Phi}$ 태경 FCW가 국내에서 개발되었다. 하지만 개발된 FCW를 사용하여 제작된 금형의 수명이 부족한 현상이 발생하였다. 이에 금형의 수명을 연장시킬 수 있는 내균열성 및 내열충격성을 확보한 태경 FCW의 개발과 개발된 FCW의 성능평가가 요구되었다. 특히 열간단조 금형에 있어서 중요한 내열충격성의 경우 가열과 냉각의 반복 Cycle에 의한 Thermal shock의 평가가 대부분이며 높은 Cycle로 인해 많은 시간이 걸리며, 또한 가열과 냉각을 오갈 수 있는 고가의 시험장치가 요구된다. 그러므로 개발된 FCW 육성용접부의 내균열성 및 내열충격성을 평가할 수 있는 방법에 대한 연구와 특히 내열충격성을 시간이 적게 걸리면서도 경제적으로 평가할 수 있는 방법에 대한 연구가 필요하다. 본 연구의 목적은 열간단조 금형 육성용접부의 내균열성 및 열충격특성을 평가할 수 있는 방법에 대한 검토와 특히 내열충격성에 대해 J.W.Kim등의 시험방법을 참고하여 시간이 적게 걸리면서 저 비용으로 열 충격특성을 평가할 수 있는 시험법을 고안하는 것이다. 이를 위한 방법으로 육성용접부의 내균열성을 평가하기 위한 상온 Bending을 실시하였고, 내열충격성을 평가하기 위한 염욕로를 이용하는 고온 Bending을 고안하여 실시하였다. 상온 Bending, 고온 Bending 모두 3점 굽힘시험을 적용하였다. 고온 Bending의 가열방법으로는 염욕로를 사용하여 시편이 대기중에서 약 $850^{\circ}C$의 온도가 될 수 있도록 하였다. 시편은 각각 열처리를 하여 요구 경도를 확보하였고, 이를 염욕로에서 5분간 가열 및 유지하여 취출 후 굽힘하중을 가하여 변위의 정도로 열충격을 평가하는 방법을 사용하였다. 상온 Bending은 극한변형량과 파단부 극한응력으로, 고온 Bending은 고온 극한변형량으로 평가를 하였고, 외국산 FCW를 사용한 육성용접부를 비교대상으로 하였다. 평가 결과 개발된 국산 $3.2{\Phi}$ 태경 FCW의 성능은 외국산 FCW와 유사하거나 우수한 것으로 평가되었고, 실제 금형을 제작하여 현장에 적용한 결과 금형의 수명이 연장된 것이 나타났다.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.