• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.362-367
• /
• 2011

The aerodynamic performance of the pantograph of the next generation high sped train is analyzed. The calculation of the flow around pantograph is carried cut by FLUENT; by the steady state flow calculation with ${\kappa}-{\omega}$ SST turbulence model, the lift force of the pantograph is computed. For the verification of the numerical schemes am grid systems, flow calculations are performed with the pantograph shape which was used at the experiments performed at Railway Technical Research Institute (RTRI) in Japan. Then, the difference of lift force between numerical am experimental results is about 10%. Therefore, selected numerical schemes and the current grid system is adequate for the analysis am prediction of the aerodynamic performance of panthograph system. Based on these numerical schemes am grid system, the flow around pantograph of the next generation high sped train is calculated and the lift force of the pantograph is predicted; the lift force of the pantograph is about 146N.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.537-542
• /
• 2000

Wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of STD-11 in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension. The deflection is the smallest at the speed of wire of 10.6m/min and the water specific resistivity of 5k$\Omega$.cm. The deflection is found to be decreased as increasing dwell time. But if the water pressure is high, it is found not to be changed after the vibration of 4sec. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, is observed for rough wire-cutting EDM of STD-11. This phenomena is found to be similar in spite of the change of EDM energy level. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• Journal of Nutrition and Health
• /
• v.29 no.2
• /
• pp.166-176
• /
• 1996

Effect of fish oil feeding was investigated on morphological changes of thoracic aora in female rats after bilateral oophorectomy(OVX). Fifty four healthy female rats of Spraque-Dawley strain, were divided into sham group, OVX group and , OVX and fish oil feeding, group. Experimental animals were sacrificed at the end first, eighth week and sixteenth week after operation, thoracic aorta blood sample were collected. The results obtained were as follows ; 1) Total cholesterol and LDL-cholesterol contents in serum were significantly higher in the sham and OVX groups than fish oil feeding group. Serum HDL-cholesterol levels among three exjperimentnal group were lowest in the OVX group. 2) In the sham operation group, as experimental period prologed the endothelial cells were distorted round shape and enlarged, and the subendothelial layer was widened in tunical intima. The elastic lamina were disrupted in tunica group. In the fish oil feeding group, the endothelial cells and subendothelial layer in tunica intima, and the elastic lamina in tunica media were intance. From the present results, it was suggested that fish oil feeding may prevent the atherosclerotic changes in thoracic aorta and serum cholesterol induced by oophhorectomy in the rats.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.18-23
• /
• 2018

To study the impedance characteristics of a fluorescent OLED according to the device structure, we fabricated Device 1 using ITO / NPB / $Alq_3$ / Liq / Al, Device 2 using ITO / 2-TNATA / NPB / $Alq_3$ / Liq / Al, and Device 3 using ITO / 2-TNATA / NPB / SH-1:BD / $Alq_3$ / Liq / Al. The current density and luminance decreased with an increasing number of layers of the organic thin films in the order of Device 1, 2, 3, whereas the current efficiency increased. From the Cole-Cole plot at a driving voltage of 6 V, the maximum impedance values of Devices 1, 2, and 3 were respectively 51, 108, and $160{\Omega}$ just after device fabrication. An increase in the impedance maximum value is a phenomenon caused by the charge mobility and the resistance between interfaces. With the elapse of time after the device fabrication, the shape of the Cole-Cole plot changed to a form similar to 0 or a lower voltage due to the degradation of the device. As a result, we were able to see that an impedance change in an OLED reflects the characteristics of the degradation and the layer.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.5
• /
• pp.11-16
• /
• 2010

The development of lifting pumps that lift minerals to a mining vessel are one of the vital parts of the commercial mining process. The purpose of this study is to investigate internal flow and its effect on the performance of a mixed flow pump in order to improve the pump's performance. Numerical analysis was performed by commercial code of ANSYS CFX-11 based on flow rate and length of flexible hose. The rated rotational speed of the impeller is 1750rpm. For taking into account the turbulence, k-$\omega$ SST model was selected to guarantee more accurate prediction of flow separation. The simulated results are in good agreement with the experimental results and showed that its efficiency and the head of the pump are related mainly to the flow rate and the length of flexible hose. A lesser flow rate caused more secondary flow through the guide vane passage. The length of flexible hose and flow rate exert much more influence on the pump's performance than the shape of the flexible hose.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.365-369
• /
• 2016

In this paper, we fabricated Cu/Mn alloy shunt resistor with low resistance and thermal stability for use of mobile electronic devices. We designed metal alloy composed of copper (Cu) and manganese (Mn) to embody in low resistance and low TCR which are conflict each other. Cu allows high electrical conductivity and Mn serves thermal stability in this Cu/Mn alloy system. We confirmed the elemental composition of the designed metal alloy system by using energy dispersive X-ray (EDX) analysis. We obtained low resistance below $10m{\Omega}$ and low temperature coefficient of resistance (TCR) below $100ppm/^{\circ}C$ from the designed Cu/Mn alloy resistor. And in order to minimize resistance change caused by alternative frequency on circuit, shape design of the metal alloy wire is performed by rolling process. Finally, we conclude that design of the metal alloy system was successfully done by alloying Cu and 3 wt% of Mn, and the Cu/Mn alloy resistor has low resistance and thermal stability.

• Korean Journal of Materials Research
• /
• v.17 no.10
• /
• pp.526-531
• /
• 2007

The sintering behavior and electrical property of $Ce_{0.8}Gd_{0.2}O_{1.9}$ ceramics were investigated with the iron oxide concentration ranging from 0 to 5 mol%. Both the sintered density and grain size were found to increase up to 2 mol% $Fe_2O_3$, and then to decrease with further additions. At a higher $Fe_2O_3$ content above 3 mol%, grain size decreased by a pinning effect induced by different shape grains. The electrical conductivity was also increased with increasing $Fe_2O_3$ content up to 2 mol%. Total conductivity of 2 mol% $Fe_2O_3-added$ specimen showed the maximum conductivity of $2{\times}10^{-2}{\Omega}{\cdot}cm^{-1}$ at $500^{\circ}C$. The addition of $Fe_2O_3$ was found to promote the sintering properties and electrical conductivities of $Gd_2O_3-dope\;CeO_2$.

• Korean Journal of Microbiology
• /
• v.43 no.1
• /
• pp.66-71
• /
• 2007

Two isolates of genus Acinetobacter were obtained from Jang-Baek waterfall in North Korea. Morphological characteristics of the isolated 2 strains were Gram-negative, aerobic and rod shape bacteria. Physiological and biochemical characterization of the isolated 2 strains were some different aspect from those of type strains. 16S rDNA sequence analysis showed that the two isolates shared 99.9% sequence similarity. Strains JB10 and $JB15^{T}$ were shown to belong to the Gammaproteobacteria and showed the highest levels of sequence similarity to Acinetobacter tandoii $4N13^{T}$ (97.3%), Acinetobacter haemolyticus $ATCC17906^{T}$ (97.2%), Acinetobacter johnsonii $DSM6963^{T}$ (97.2%), Acinetobacter junii $DSM6964^{T}$ (96.7%), Acinetobacter schindleri $LUH5832^{T}$ (97.0%) and Acinetobacter ursingii $LUH3792^{T}$ (96.6%). The major cellular fatty acid in Acinetobacter type strains and isolated strains included $C_{18:1}\;{\omega}9c\;and\;C_{16:1}\;{\omega}7c/C_{15:0}\;iso\;2OH$. Eventhough it was ascertained that the isolated strains were closely related to genus Acinetobacter, physiological and biochemical characteristics and the result of the isolated strains 16S rDNA analysis indicate some different aspects from those of type strains of genus Acinetohacter It is considered that the isolated JB10 (=KEMC 52-093) and $JB15^{T}\;(=KEMC\;52-094^{T})$ strains be new species of genus Acinetobacter. We name it as Acinetobacter koreensis sp. nov.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.230-237
• /
• 2010

A homologous series of linear liquid crystal dimers, ${\alpha},{\omega}$-bis(4-nitroazobenzene-4'-carbonyloxy)alkanes (NATWESn, n = 2~8, 10, the number of methylene units in the spacer) have been synthesized, and the thermal behavior of the series has been investigated. All the dimers formed enantiotropic nematic phases. The nematic-isotropic transition temperatures of the dimers and their entropy variation at the phase transition showed a large odd-even effect as a function of n. This behavior was rationalized in terms of the change in the average shape of the spacer on varing the parity of the spacer. The thermal stability and degree of order in the nematic phase and the magnitude of the odd-even effect of NATWESn were very similar to those of the corresponding ether compounds, while they were significantly different from those of the monomesogenic compounds, 4-{4'-(nitrophenylazo)phenoxy}alkanoyl chlorides and the side-chain liquid-crystalline polymers, the poly[1-{4-(4'-nitrophenylazo) phenoxycarbonylalkanoyloxy}ethylene]s. The results were discussed in terms of the 'irtual trimer model'by Imrie.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.119-125
• /
• 2013

In this study, we studied the properties of ZnO(Al) and ZnO(AlGa) thin film according to film thickness deposited on SLG by In-line magnetron sputtering system. XRD, FESEM, 4-point probe, Hall measurement system and UV/Vis-NIR spectrophotometer were employed to analyze the properties of ZnO(Al) and ZnO(AlGa) thin film. The all films exhibited (002) preferential orientation with clear peak shape and high intensity. The carrier concentration and Hall mobility of ZnO(Al) and ZnO(AlGa) thin film were improved with increasing thickness. The resistivity of both films decreased when the film thickness was raised from 500 nm to 1,450 nm. And then relatively the resistivity of ZnO(AlGa) film was lower than that of ZnO(Al) film. The transmittance of the films decreased with increasing film thickness but all films exhibited optical transmittances of over 83.3% in the visible region.