• Journal of the Korean Magnetics Society
• /
• v.26 no.4
• /
• pp.133-136
• /
• 2016

In this study, we have constructed a measuring system to investigate tensile stress of tendons, which is employed in bridges, by means of the magnetic non-destructive testing (NDT) method. For the twisted 7-strands tendon, we have used Wiedemann effect. An ac current was applied to the tendon and voltage induced from Search Coil on Tendon (SCT) under applying tensile stress was measured. The measuring system consists of tensile stress applying apparatus up to 2 GPa, and ac current supply to apply current to the tendon directly to magnetize the tendon. We have invested two kinds of tendon which were produced by different companies for testing with constructed measuring system. Voltage induced from SCT was decreased up to 1.5 GPa linearly and two kinds of tendon which were produced by different companies shows similar trends. Thus, Wiedemann effect was also applicable to measure tensile stress of tendon by means of magnetic NDT.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.605-612
• /
• 2000

Four young swamp buffalo cows of similar age ranging in weight between 280 to 380 kg and trained to do physical work were used in a study to determine energy and protein requirements for draught using a $4{\times}4$ Latin square designed experiment. The experiment consisted of field trials employing 4 levels of work load, e.g. no work as control, and loads amounting 450 to 500 Newton (N) pulled continuously for 1, 2 and 3 h daily for 14 consecutive days. Cows were fed king grass (Penisetum purpuroides) ad libitum and were subjected to materials balance trials. Body composition was estimated in vivo by the body density method and daily energy expenditure (EE) was calculated from ME minus retained energy (RE). The results show that EE while not working ($EE_{resting}$) was $0.42kgW^{0.75}MJ/d$ and maintenance ME ($ME_m$) was $0.37kgW^{0.75}MJ/d$. ME requirement increased to 1.65 times maintenance for the work of 3 hours. The energy expended for doing exercise ($E_{exercise}$) was 9.56, 20.0 and 25.86 MJ/cow for treatments 1, 2 and 3 II, respectively. Fat retention was absent in all groups of working cows, but protein retention was only negative for cows undertaking 3 h work. The relationship between $E_{exercise}$ (MJ), work load (F, kN), work duration (t, h) and body mass (W, kg) was found to be: $E_{exercise}=(0.003F^{1.43}t^{0.93})/W^{0.09}MJ$. The maintenance requirement for digestible protein was $2.51kgW^{0.75}g/d$, whereas digestible protein for growth ($DP_{growth}$) and for work ($DP_{work}$) followed the equations: $DP_{growth}=[(258+1.25W^{0.75}){\Delta}Wkg/d]g$ and $DP_{work}=[12.59e^{0.95t}]g$, respectively The coefficients a, b and c for the calculation of $E_{exercise}$ components according to the Lawrence equation were found to be 2.56 J/kgW.m, 5.2 J/kg load carried.m and 0.29, respectively, thus efficiencies to convert ME into work were 0, 16.09, 27.3 and 32.44% for control, 1, 2 and 3 h/d work, respectively. ME and DP requirements for a 250 to 400 kg working buffalo cow allowing to growth up to 0.5 kg/d are presented.

• Journal of the korean veterinary medical association
• /
• v.25 no.10
• /
• pp.595-606
• /
• 1989

항원제시세포(APC)와 보조T세포 간의 협력작용에 의하여 활성화된 작동세포(NK세포, CTL, K세포, 대식세포, 과립구 등)의 종양세포, 이식장기 및 세포내기생세균에 감염된 각종 세포에 대한 세포독성작용은 생체방어를 위한 중요한 세포성면역기전이다. 지난 몇 년간 세포성면역기전에 관한 많은 연구에도 불구하고 T림파구매개성 세포독성작용의 면역생물학적기전은 확실히 밝혀있지 않다. 지금까지 알려진 중요한 연구내용을 요약하면 다음과 같다. 1. 세포독성작용을 나타내는 작동세포로는 NK세포, CTL, K세포, 대식세포/단핵구 및 과립구가 있다. 2. T세포의 세포표면항원분자군(CD)으로는 $CD_{2},\;CD_{3},\;CD_{4}[Ly_{3}T_{4}],\;CD_{5}[=Ly_{1}],\;CD_{7},\;CD_{8}[Ly_{2,3}]$가 있으며 $CD_{4}$는 보조Ttpvhdml 특이마커이고 $CD_{8}$는 세포독성 T세포 및 억압T세포의 특이마커이다. 주요 T세포수용체(TCR)는 $CD_{4}$ 또는 $CD_{8}$ 분자와 가까이 연합된 이향체($TCR-{\alpha}{\beta}/TCR-{\gamma}{\delta}$이며 보조 T세포 $CD_{4}$(마우스 $L_{3}T_{4}$)는 수용체와 연합되어 있는반면 억압 T세포 $CD_{8}(Ly+_{2,3})$는 항원수용체와 연합되어 있다. 3. T세포는 Ti-$CD_{3}$(항원/MHC) 복합체를 통한 '항원가교'에 의한 자극(항원인식)과 $CD_{2}$를 통한 비특이경로에 의하여 활성화(분화증식)된다. 비특이경로를 통한 활성경로에서 T세포($CD_{4}$ 및 $CD_{8}$)가 활성화되기 위하여는 보조T세포가 생산하는 IL-2을 요구하며 IL-2의 자극으로 분화증식된 $CD_{8}$는 세포독성능을 나타내지만 $CD_{4}^{+}$는 여전히 세포독성능을 나타내지 못한다. 4. 보조T세포는 class II MHC분자와 연합된 항원을 식별하는 반면 세포독성T세포는 class I MHC 분자와 연합된 항원을 식별한다. 5. 림파구 매개성 세포독성은 접촉(conjugati-on), 탈분극(depolarization), 용해계획(progra-mming), 용해(lysis) 및 재순환(recycling)의 단계를 거쳐 진행된다. 6. 표적세포살해매체로는 perforin / PFP / cy-tolysin, lymphopores, lymphotoxins, protone, cytolytic enzymes가 알려졌으며 세포독성작용은 이들 이외에도 여러 가지 매체를 통한 복합작용으로 추정된다. 7. CTL 매개성 표적세포의 주요 대사변화는 actomyocin ATPase의 증가, phosphocreatine과 ATPase의 소모, ATP 의존성 $Na^{+}/K^{+}$ 펌프작용의 중지, ATP 의존성 $Ca^{2+}$ 유출감소 및 세포내 축적이 관찰된다. 8. $Ca^{2+}$의 축적으로 세포막 교질 침투손상을 주어 수분의 유입을 증가시킴으로써 수포형성, 핵붕괴, 사립체팽화 및 정상세포 구조상실(Zeiosis)이 있다. 결론적으로 CTL 매개성 세포독성작용은 PFP, LT, TNF, 유사 TNF / LT 및 기타 매체를 통한 복합작용이며 세포살해기전은 지속적 대사소모와 정형적 세포구조(핵 및 세포질)의 파괴에 의한 것이다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.330-336
• /
• 2015

Purpose: This study evaluated the effect of loss of interproximal papilla, creating an undercut, on the accuracy of impression materials. Materials and methods: Two addition type silicone impression materials ($Extrude^{(R)}$ Speed Wash, $Imprint^{TM}$ II Quick Step Light Body) and one alginate impression material (Cavex Impressional) were used to make impressions of a maxillary master model simulating clinical conditions with or without interproximal papilla. Stone was poured in the impressions and working casts were fabricated. A total of 6 groups with 6 working casts in each group were scanned using 3-dimensional optical scanner. The accuracy of the impressions was assessed by measuring the dimensional changes (${\Delta}I$ (%)) of 6 distances on working casts compared to a master model with a 3-dimensional digitizing and inspection software. The data were analyzed by two-way ANOVA (P<.05). Results: Three of 6 distances showed statistically significant differences among the impression materials. Only 1 of 6 distances in alginate impression showed a statistically significant difference between casts with and without interproximal papilla (P=.047). Conclusion: The presence of undercut due to loss of interproximal papilla did not significantly influence the dimensional accuracy of addition type silicone and alginate impression materials.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.246-253
• /
• 2017

This study was conducted prepare spray-dried powder using pumpkin sweet potato hydrolysates and examine the physicochemical properties of the powder. The insoluble dietary fiber and soluble dietary fiber of the pumpkin sweet potato treated by enzyme were 4.17% and 2.07%, respectively. The spray-dried pumpkin sweet potato hydrolysates was manufactured via spray-drying with different forming agents: i.e., pectin 0.1%, 0.5%, 1%, and 2.0%. The moisture contents and total starches of the spray-dried powders were approximately 1.68-2.46 and 45.32-46.51%, respectively. The color of the L and a value decreased, and that of the b and ${\Delta}E$ value increased. The particle size and outer topology of the spray-dried powders were $37.17-42.32{\mu}m$, and its shape was generally globular. The water absorption index of the spray-dried powder (1.74-1.91) was lower than that of the freeze-dried powder (2.15). The water solubility index of the spray-dried powder, 80.75-87.61%, was higher than that of the freeze-dried powder (70.47%). The adhesion values of spray-dried powder to epithelial HT-29 cells were 2.66-6.18% of the initial cell counts, whereas freeze-dried powder showed lower adhesive ability (1.79%). The in vitro human digestibility in the spray-dried powder was 70.09% which is very effective in digestion.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.2
• /
• pp.151-161
• /
• 2012

An intensive analysis of 148 timings of V700 Cyg was performed, including our new timings and 59 timings calculated from the super wide angle search for planets (SWASP) observations, and the dynamical evidence of the W UMa W subtype binary was examined. It was found that the orbital period of the system has varied over approximately $66^y$ in two complicated cyclical components superposed on a weak upward parabolic path. The orbital period secularly increased at a rate of $+8.7({\pm}3.4){\times}10^{-9}$ day/year, which is one order of magnitude lower than those obtained by previous investigators. The small secular period increase is interpreted as a combination of both angular momentum loss (due to magnetic braking) and mass-transfer from the less massive component to the more massive component. One cyclical component had a $20.^y3$ period with an amplitude of $0.^d0037$, and the other had a $62.^y8$ period with an amplitude of $0.^d0258$. The components had an approximate 1:3 relation between their periods and a 1:7 ratio between their amplitudes. Two plausible mechanisms (i.e., the light-time effects [LTEs] caused by the presence of additional bodies and the Applegate model) were considered as possible explanations for the cyclical components. Based on the LTE interpretation, the minimum masses of 0.29 $M_{\odot}$ for the shorter period and 0.50 $M_{\odot}$ for the longer one were calculated. The total light contributions were within 5%, which was in agreement with the 3% third-light obtained from the light curve synthesis performed by Yang & Dai (2009). The Applegate model parameters show that the root mean square luminosity variations (relative to the luminosities of the eclipsing components) are 3 times smaller than the nominal value (${\Delta}L/L_{p,s}{\approx}0.1$), indicating that the variations are hardly detectable from the light curves. Presently, the LTE interpretation (due to the third and fourth stars) is preferred as the possible cause of the two cycling period changes. A possible evolutionary implication for the V700 Cyg system is discussed.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.585-603
• /
• 1999

Esthetic availabilities used as an esthetic restorative maternals can be determined by the optical coincidence among materials, enamel and dentin. Enamel is highly translucent. That's why esthetic materials need to correspond the close translucency of enamel. But the translucent materials are affected by the background color. So it should be predicted that the color of estorative materials depend on the any thickness and the spectral reflectance of the background on which they are placed. The object of this investigation, under above hypothesis, was to determine and analyze how they affect the final color according to the thickness, translucency and background color (white, black and dentin) fill three commercial light cured composite resins(Charisma, Spectrum TPH and Z100). And correlation was analyzed to find out the possibility of the prediction when using the certain background color and thickness of materials. Followings are the result 1. The I shade of CHA showed the lowest contrast ratio($Co_7$) while the B3 shade of Z100 showed the highest contrast ratio(p<0.05). 2. The value of $L^*$ and $b^*$ on the white and dentin background is increased with decreasing thickness. And there are significant relationships between increasing thickness and each value(R>0.085). But there is a little change of $L^*$ and $b^*$ value on the black background regardless of the thickness(p>0.05). 3. For the $a^*$ value, there was little difference in values as a function of thickness and changed irregularly regardless of thickness in all background. 4. The pattern of increasing value of $L^*$ and $b^*$ with decreasing thickness was similar to the group of white and dentin background. In both dentin one showed lesser change of value. 5. The values of $L^*a^*b^*$ measured on the different background with same thickness showed the recognizable color difference(${\Delta}E^*$>2) when the thickness was below 2.6mm. 6. Contrast ratio was increased with increasing thickness with significant relationship (R>0.9). 7. Spectral reflectance of composite resins that calculated from Kubelka-Munk equation was showed little difference compared with observed value w1th decreasing thickness.

• Journal of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.89-95
• /
• 2003

Observations of dark matter dominated dwarf and low surface brightness disk galaxies favor density profiles with a flat-density core, while cold dark matter (CDM) N-body simulations form halos with central cusps, instead. This apparent discrepancy has motivated a re-examination of the microscopic nature of the dark matter in order to explain the observed halo profiles, including the suggestion that CDM has a non-gravitational self-interaction. We study the formation and evolution of self-interacting dark matter (SIDM) halos. We find analytical, fully cosmological similarity solutions for their dynamics, which take proper account of the collisional interaction of SIDM particles, based on a fluid approximation derived from the Boltzmann equation. The SIDM particles scatter each other elastically, which results in an effective thermal conductivity that heats the halo core and flattens its density profile. These similarity solutions are relevant to galactic and cluster halo formation in the CDM model. We assume that the local density maximum which serves as the progenitor of the halo has an initial mass profile ${\delta}M / M {\propto} M^{-{\epsilon}$, as in the familiar secondary infall model. If $\epsilon$ = 1/6, SIDM halos will evolve self-similarly, with a cold, supersonic infall which is terminated by a strong accretion shock. Different solutions arise for different values of the dimensionless collisionality parameter, $Q {\equiv}{\sigma}p_br_s$, where $\sigma$ is the SIDM particle scattering cross section per unit mass, $p_b$ is the cosmic mean density, and $r_s$ is the shock radius. For all these solutions, a flat-density, isothermal core is present which grows in size as a fixed fraction of $r_s$. We find two different regimes for these solutions: 1) for $Q < Q_{th}({\simeq} 7.35{\times} 10^{-4}$), the core density decreases and core size increases as Q increases; 2) for $Q > Q_{th}$, the core density increases and core size decreases as Q increases. Our similarity solutions are in good agreement with previous results of N-body simulation of SIDM halos, which correspond to the low-Q regime, for which SIDM halo profiles match the observed galactic rotation curves if $Q {\~} [8.4 {\times}10^{-4} - 4.9 {\times} 10^{-2}]Q_{th}$, or ${\sigma}{\~} [0.56 - 5.6] cm^2g{-1}$. These similarity solutions also show that, as $Q {\to}{\infty}$, the central density acquires a singular profile, in agreement with some earlier simulation results which approximated the effects of SIDM collisionality by considering an ordinary fluid without conductivity, i.e. the limit of mean free path ${\lambda}_{mfp}{\to} 0$. The intermediate regime where $Q {\~} [18.6 - 231]Q_{th}$ or ${\sigma}{\~} [1.2{\times}10^4 - 2.7{\times}10^4] cm^2g{-1}$, for which we find flat-density cores comparable to those of the low-Q solutions preferred to make SIDM halos match halo observations, has not previously been identified. Further study of this regime is warranted.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.12 no.2
• /
• pp.46-53
• /
• 2014

Purpose: We conducted this study in order to determine clinical features and prognostic factors in adults with acute tetrodotoxin (TTX) poisoning caused by ingestion of puffer fish. Methods: In this retrospective study, 107 patients were diagnosed with TTX poisoning. The subjects were divided into two groups according to duration of treatment; Group I, patients were discharged within 48 hours (n=76, 71.0%), Group II patients were discharged after more than 48 hours (n=31, 29.0%). Group II was subsequently divided into two subgroups [IIa (n=12, 11.2%), IIb (n=19, 17.8%)] according to the need for mechanical ventilation support. Results: In multivariable logistic regression analysis, the predictors of the need for treatment over 48 hours were dizziness (odds ratio [OR], 4.72; 95% confidence intervals [CI], 1.59-12.83), time interval between onset of symptom and ingestion (OR, 0.56; 95% CI, 0.16-0.97), $PaCO_2$<35 mmHg (OR, 8.37; 95% CI, 2.37-23.59). In addition, predictors of the need for mechanical ventilation were a time interval between onset of symptoms and ingestion (OR, 0.54; 95% CI, 0.11-0.96) and $PaCO_2$<35 mmHg (OR, 5.65; 95% CI, 1.96-18.66). Conclusion: Overall, dizziness, time interval between onset of symptoms and ingestion, ${\Delta}DBP$ and $PaCO_2$<35 mmHg predict the need for treatment over 48 hours, time interval between onset of symptoms and ingestion and $PaCO_2$<35 mmHg predict the need for mechanical ventilation support after acute TTX poisoning.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.135-145
• /
• 2010

In order to enhance overall quality of the Backsulki, a sweet potato flour (SPF) which is rich in sugar and dietary fiber was added into the rice flour at 0, 5, 15, and 25% (w/w, db) ratios. Quality changes of the products were evaluated by storing at 5, 15, and 25$^{\circ}C$ for 4 days. Water binding capacity, swelling power, and solubility of the products increased as the SPF increased. Hunter colorimetric a- and b-value increased while L value of the products decreased as the SPF increased. Retarded retrogradation of the flour mixtures containing the SPF was shown from the DSC thermogram as indicated by the decreased $\Delta$H values. Increases in $T_{i}$ and $T_{p}$ values in relation with the starch gelatinization were shown from the DSC thermogram with a temperature margin of 15-20$^{\circ}C$ as the SPF increased. Increases in softness along with decreases in springiness and chewiness of the products were shown as the SPF increased. It was not so much the storage temperature as the added SPF affected the final texture of the products. Retarded growth of the total microbes of the products was noted by the added SPF during storage at 25$^{\circ}C$ for 3 days. Regarding the above and additional sensory preference scores of the products, a 15%(w/w) level of the SPF was suggested as optimum for the best Backsulki with improved qualities.