• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1358-1365
• /
• 2016

The purpose of this study was to verify the drying characteristics of seasoned red pepper sauce and establish optimal drying conditions for far infrared drying of seasoned red pepper sauce. Seasoned red pepper sauce, which was dried by heated air, was used. One kg of seasoned red pepper was spread at thicknesses of 10 and 20 mm and dried by a far infrared dryer until a final moisture content of $15{\pm}0.5%$. The far infrared dryer conditions were air velocity of 0.6, 0.8 m/s and drying temperatures of 60, 70, and $80^{\circ}C$. The drying models were estimated using a determination coefficient and root mean square error. Drying characteristics were analyzed based on factors such as drying rate, color changes, content of capsaicinoids, and energy consumption. The results can be summarized as follows. The drying rate (that is, drying time) tended to be reduced as temperature and air velocity for drying increased. The Page and Henderson models were suitable for drying of seasoned red pepper sauce by a far infrared dryer. Redness decreased after far infrared drying under all experimental conditions. The color difference was 18.18 under the following conditions: thickness 20 mm, temperature $70^{\circ}C$, and air velocity 0.8 m/s. This value was slightly higher than those under other far infrared drying conditions. The capsaicinoid properties of seasoned red pepper sauce decreased under all far infrared drying conditions. The highest capsaicin (19.91 mg/100 g) and dihydrocapsaicin (12.87 mg/100 g) contents were observed at a thickness of 10 mm, temperature of $80^{\circ}C$, and air velocity of 0.8 m/s. Energy consumption decreased with higher temperature, slower air velocity, and thinner seasoned red pepper sauce.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1492-1503
• /
• 2015

This study evaluated the combination effect of various freezing and thawing techniques on the quality and nutritional aspects of onions. Onions were frozen by natural air convection freezing (NCF), air blast freezing (ABF), and liquid nitrogen freezing (LNF). Onions were frozen for 76 min by NCF, 9 min by ABF, and 9 min by LNF. The freezing treatment was stopped when the core temperature reached $-12^{\circ}C$ for NCF and ABF, and $-120^{\circ}C$ for LNF. Frozen samples were thawed through natural air convection thawing, running water thawing, sonication thawing (ST), or microwave thawing. The quality and nutritional aspects of frozen-thawed onions were evaluated by measuring thawing loss, pH, texture, water content, color, and SEM image. ST was found to cause the least loss in onion sample among the tested thawing methods, whereas the freezing methods did not cause any significant loss. In our experiment, thawing is found to be a more critical technique when compared to that of freezing. There were no clear quantifications or trends of pH and water content among different freezing and thawing techniques. The highest total color difference (${\Delta}E$) was observed in the NCF sample. For morphological observation, ABF gave the smallest ice crystal size, as well as minimum cell collapse. Loss of vitamin C, free sugar, and organic acid content was lower in the ABF and ST sample, when compared to other trials. In our study, we found that combination of ABF and ST could preserve the quality and nutritional aspects of frozen-thawed onions better than other methods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.2
• /
• pp.49-58
• /
• 1989

For the effective utilization of anchovy as a food source, this work was undertaken the com-parison in food quality of anchovy snacks and its changes during storage at room temperature ($24\pm4^{\circ}C$). Chopped anchovy was mixed with soft flour($340.0\%$, w/w), corn starch($10.0\%$, w/w), sodium chloride($2.5\%$, w/w), monosodium glutamate($0.1\%$, w/w), sodium bicarbonate ($2.5\%$, w/w), water($5.6\%$, w/w), onion powder($0.3\%$, w/w), garlic powder($0.3\%$, w/w), red pepper powder($0.3\%$, w/w) and sodium erythorbate($0.2\%$, w/w), The mixture were rolled, aged, co沇ed, dried and finally parched or deep-fried at $190\pm10^{\circ}C$. The anchovy snacks were packed in the casted polypropylene film bag ($16cm{\times}14cm$), The changes in moisture contents, water activity, pH, volatile basic nitrogen, contents of amino acid and color values of products were negligible during storage. The results of TBA value and peroxide value showed that lipid oxidation can be retarded by adding antioxidant and spices. Judging from contents of amino acid and mineral, the products were more nutritive than the sold shrimp snack on the market. From the results of sensory evaluation and chemical experiments, the product prepared with sodium erythorbate could be preserved in good quality during storage of 120 days.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.321-328
• /
• 2003

The epithermal gold and base metal deposit of the Tanggeung district of West Java consists of four major veins(Celak, Cigodobras, Cilangkap and Pasirbedil) with NS to N10$^{\circ}$∼20$^{\circ}$E and N75$^{\circ}$W strikes. The veins occur within fractures cutting the crystal and lithic tuff of Jampang Formation(Oligo-Miocene) in and around the Mt. Subang of the western Java, Indonesia. The ore mineralization is characterized by the occurrence of pyrite, sphalerite, galena, chalcopyrite, and small amounts of bornite and Fe-oxides. Hydrothermal alteration, associated with the mineralization, was dominantly silicified and enveloped by the phyllitic(sericitic), argillic and propylitic alteration containing the disseminated pyrite. Gangue minerals consist of interstratified smectite-illite, chlorite, sericite, and minor kaolinite. The presence of vapor-rich fluid inclusions in quartz veins suggests that boiling occurred locally throughout ore deposition. Fluid inclusion studies suggest that the ore fluid evolved from initial high temperatures(〓34$0^{\circ}C$) to later lower temperatures(〓19$0^{\circ}C$). Salinities range from 0.0 to 8.3 wt percent NaCl equiv. The relatively high increase in salinity(up to 8.3 wt percent NaCl equiv) might be explained by a local boiling and by a participation of magmatic fluids, supported by the sulfur isotope results. Evidence of fluid boiling suggests that the pressure decreased from 200 bars to 120 bars. This corresponds to the depths of approximately 750 to 1,200 m in a hydrothermal system that changed from lithostatic to hydrostatic conditions. Using homogenization temperatures and paragenetic constraints, the calculated $\delta$$^{34}$ S values of $H_2S$ in ore fluid are -0.2 to 1.8 permil close to the 0 permil isotopic value of magmatic sulfur.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.36-44
• /
• 2007

The purpose of this study was to investigate thermal stability, reactivity, and bonding strength of existing epoxy resin mixed with the epoxidized soybean oil (ESBO) in order to use soybean oil economically. In the dry shear test, the marked strengths showed $30.5kgf/cm^2$ at the ratio of ESBO to epoxy resin 9 : 1 and $6.2kgf/cm^2$ at the ratio 8 : 2. The bonding strengths of the others, except mixing ratios 2 : 8 and 1 : 9, exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$. In the wet shear test, the result was $5.8kgf/cm^2$ at the ratio 9 : 1. There were no thickness swelling and moisture absorption in the water resistance of the film. The value of activation energy, Tg (${\Delta}E$), by DSC analysis showed between $110^{\circ}C$ and $120^{\circ}C$ through all ratios. Epoxy in the epoxy resin fully reacted with the hardener (TETA), but it is difficult to decide that epoxys in the ESBO were reacted directly with the hardener from FT-IR analysis. As the mixing ratio of ESBO increased, the thermal stabilities dropped from TGA analysis. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that the ESBO in the mixed adhesive of epoxy resin/ESBO played a role as an extending agent level of epoxy adhesive, and we were able to know that in order to utilize ESBO as an adhesive, a study should be performed on the condition of hardening, inducible of the hardening reaction.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2008

This study was performed to estimate non-$CO_2$ greenhouse gases (i.e., GHGs) emission from biomass burning at a local scale. Estimation of non-$CO_2$ GHGs emission was conducted using Landsat TM satellite imagery in order to assess the damage degree in burnt area and its effect on non-$CO_2$ GHGs emission. This approach of estimation was based on the protocol of the 2003 IPCC Guidelines. In this study, we used one of the most severe fire cases occurred Samcheock in April, 2004. Landsat TM satellite imageries of pre- and post-fire were used 1) to calculate delta normalized burn ratio (dNBR) for analyzing burnt area and burn severity of the Samcheok large-fire and 2) to quantify non-$CO_2$ GHGs emission from different size of the burnt area and the damage degree. The analysis of dNBR of the Samcheok large-fire indicated that the total burnt area was 16,200ha and the size of the burnt area differed with the burn severity: out of the total burnt area, the burn severities of Low (dNBR < 152), Moderate (dNBR = 153-190), and High (dNBR = 191-255) were 35%, 33%, and 32%, respectively. It was estimated that the burnt areas of coniferous forest, deciduous forest, and mixed forest were about 11,506ha (77%), 453ha (3%), and 2,978ha (20%), respectively. The magnitude of non-$CO_2$ GHGs emissions from the Samcheok large-fire differed significantly, showing 93% of CO (44.100Gg), 6.4% of CH4 (3.053Gg), 0.5% of $NO_x$ (0.238Gg), and 0.1% of $N_2O$ (0.038Gg). Although there were little changes in the total burnt area by the burn severity, there were differences in the emission of non-$CO_2$ GHGs with the degree of the burn severity. The maximum emission of non-$CO_2$ GHGs occurred in moderate burn severity, indicating 47% of the total emission.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.3
• /
• pp.410-424
• /
• 2011

This study was investigated for the purpose of obtaining basic data which can be applied to processing of canned sea mussel using tomato paste. Shell were washed, and then steamed and shucked. Sea mussel meat was prepared with ratio of sea mussel 90g, tomato paste sauce 65g(tomato paste 42%, gum guar 1.0%, salt 2.0%, starch syrup 2.0%, cooking wine 1%, water 52%). The sea mussel meats were packed with vacuum seamer in 301-3 can, and then sterilized for various F0 value(F0 8-12 min.) in a steam system retort at $118^{\circ}C$. The factors such as pH, VBN, amino-N, total amino acid, free amino acid, chemical composition, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable bacterial count of the canned sea mussel produced with various sterilization condition(F0 8-12 min.) were measured. The same element was also measured during preservation. The results showed that the product sterilized at F0 8 min. and preserved for 90 days were the most desirable.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.427-433
• /
• 2001

The purpose of this study was to investigate the effect of chitosan on the shelf-life and quality of Paeksulkis(Korea rice cake). Paeksulgis containing 0-0.5% chitosan were stored at 5$^{\circ}C$ for 4 week and 2$0^{\circ}C$ for 1 week to test the effect of extenting shelf-life of Paeksulgis by chitosan. The pH of Paeksulkis was 5.65 without chitosan and pH of those were about 7.0(6.94-7.01) with 0.05-0.5% level of chitosan. Moisture content of Paekrukis wish or without chitosan was 38-40%. In Hunter’s color values of Paeksulkis of control, the lightness (L) was 84.28, redness(a) was -1.56 and yellowness(b) was 7.68. The lightness (L), redness(a) and yellowness(b) of Paeksulkis were increased by the increasing concentration of chitosan. In mechanical characteristics, cohesiveness concentration of Paeksulkis were the highest in control while obtained the highest score in color, after swallowing and overall quality (p<0.05). The score of flavor and consistency of Paeksulkis with different levels of chitosan wre not significant while the score of moisture in Paeksulkis with 0.05-0.5% level of chitosan was significantly higher than control (p<0.05). The score of flavor and consistency of Paeksulkis with different levels of chitosan were not significant while the score of moisture in Paeksulkis with 0.05-0.5% level of chitosan was significantly higher than control (p<0.05). Total bacterial counts (TBC) of Paeksulgis immediately before storage were 4.2$\times$10$^2$CFU/g in control and those containing 0.3-0.5% of chitosan were 0.5-1.0 log cycle lower than control. TBC of Paelsulgis containing chitosan was lower than increased for 2 weeks, reached at 1.8$\times$10$^{5}$ CFU/g and decreased for 2 weeks, reached at 1.8$\times$10$^4$CFU/g during storage at 5$^{\circ}C$. TBC of Paeksulkis with more than 0.3% of chitosan were 1.9 log cycles lower than that of control during storage at 5$^{\circ}C$. TBC of Paeksulkis with more than 0.3% of chitosan were 1.9 log cycles lower than that of control during storage at 5$^{\circ}C$ for 4 weeks. TBC of Paeksulgis increased to 10$^{8}$ CFU/g in control and 10$^{6}$-10$^{7}$ CFU/g in more than 0.3% chitosan during storage at 20$^{\circ}C$ for 1 week. The shelf-life of Paeksulkis was increased with increasing concentration of chitosan both temperature at 5$^{\circ}C$ and 20$^{\circ}C$.

• Korean journal of food and cookery science
• /
• v.21 no.3 s.87
• /
• pp.301-310
• /
• 2005

The effects of defatted soy flour on the physicochemical characteristics of dough and bread making properties were studied. Defatted soy flour is added to wheat flour for bread-making in order to maximize the use of isoflavones in the soybean. Different particle sizes of both defatted soy flour and wheat flour were prepared by grinding and sievingwith meshes. In the mixograph test, the addition of defatted soy flour to wheat flour increased the requirement for water and decreased the dough development time. Water absorption rates were also investigated to determine the optimum quantity of water for good dough. As the level of defatted soy flour mixed with wheat flour increased, the sedimentation and P.K. values decreased. In comparison with control, the bread made with defatted soy flour especially had a lower specific loaf volume. Specific loaf volume of wheat flour-defatted soy flour bread prepared (Ed- this is an incomplete sentence, it's only a subject clause, and I don't how what you intend to state). In terms of the staling rate and hardness of the wheat flour-defatted soy flour bread, the increased defatted soy flour had a faster staling rate during storage at 5? than at 25? for 5days. From the result of sensory evaluation, wheat flour-defatted soy flour breads containing up to $4\%$ defatted soy flour were rated as being of high quality.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1038-1044
• /
• 1996

The salt-fermented anchovy sauce (AS) was packed in round No. 307-1 can, and thermally processed at $121.1^{\circ}C$ to obtain Fo values of 3, 5 and 10. The changes of food components and qualifies by thermal processing of sterilized AS (RAS) were examined. The compositions of AS were as followed; pH 6.81, VBN 394.7 mg/100g, total nitrogen 2,195.5 mg%, amino-nitrogen 1,010.5 mg%, and acidity 10.5 ml. Viable cell counts of AS on 0%, 5%, 20% NaCl-medium were $2.9{\times}10^3,\;9.1{\times}10^3$ and not detected, respectively. And viable cell counts of RAS were not detected. Acidity, total nitrogen and amino nitrogen contents of AS decreased slightly with the severeness of heat treatments, whereas pH and VBN content were increased. Total free amino acid contents of raw AS and RAS were 12,802.5 mg% and $11,212.6{\sim}12,105.4\;mg%$, and major amino acids were alanine, glutamic acid, leucine, isoleucine, valine and lysine. Also contents of IMP, hypoxanthine, TMAO and TMA in AS and RAS were 42.1 mg% and $35.5{\sim}40.9\;mg%$, 103.7 mg% and $103.1{\sim}105.5\;mg%$, 78.8 mg% and $58.2{\sim}71.6\;mg%$, 55.8 mg% and $58.9{\sim}68.5\;mg%$ respectively. And a little changes were observed in whole volatile components of AS with severeness of heat treatments by GC chromatogram patterns. Judging from the chemical and sensory evaluations, the Fo 3 heat treatment sample was not inferior to raw AS, and maintained good quality for 1 year storage.