• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.40-46
• /
• 2000

To select the effective fungicides for the control of leaf spot disease of jujube tree (Zizyphus jujuba) caused by Phoma sp., inhibitory effects of 26 fungicides for mycelial growth were investigated at $250{\mu}g\;a.i./m{\ell}$. In the test, eight fungicides were selected and minimum inhibitory concentration (MIC) for mycelial growth and an inhibitory effect for spore germination were investigated. Among the fungicides, myclobutanil, hexaconazole, and triflumizole were excluded in control effect tests because of their relatively high MICs. MICs were ranged $10-50{\mu}g\;a.i./m{\ell}$ for benomyl, carbendazim + kasugamycin (CK), and thiophanate-methyl. triflumizole (TT), and $50-250{\mu}g\;a.i./m{\ell}$ for iprodione + propineb (IT) and iminoctadine-triacelate (IT). However, benomyl and IP showed very low inhibitory effect on conidial germination. When the fungicides were sprayed on the seedlings before the leaves were inoculated with conidial suspension of Phoma sp., the protective values of CK and TT were around 70% at 1,000 ppm and around 90% at 2,000 ppm. The protective values were around 70% at 2,000 ppm (benomyl), 4,000 ppm (IP), and 8,000 ppm (IT). When the fungicides were sprayed after inoculation, benomyl showed the highest curative values of over 90% at 1,000 ppm and the values of CK and TT ranged $70{\sim}80%$ at 1,000 ppm. However, IP and IT had little or no effect on therapy of the disease. IT caused necrotic phytotoxicity on the leaves of jujube seedlings. As results, the best fungicides for the protection of jujube trees from leaf spot disease were CK (2,000 ppm) and TT (2,000 ppm) and for the remedy of the tree, benomyl (1,000 ppm) was the best. Therefore, alternate application of benomyl and CK or TT will be effective in the disease control.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.7-18
• /
• 2017

Purpose: A QA Set was established to verify the movement accuracy of image-guided 6DoF Couch and to evaluate its usefulness. Materials and Methods: Two sets of linear accelerators equipped with 6DoF Couch and CBCT were used. Using the established QA Set, each CBCT image was obtained over 15 times through the Penta-Guide Phantom installed with off-set shift values along six translational (Translation; TX, TY, TZ) and rotational (Rotation, Pitch; RX, Roll; RY, Yaw; RZ) directions. Using this method, we compared the reference image and the registration image, and we analyzed the error calculated by measuring the positional accuracy of the modified 6DoF Couch. Results: The Air Cavity corresponding to the Pixel of the reference image and the registration image were all contained between 30 and 66, and the revealing high registration accuracy. Error between the modified off-set value of 6DoF Couch and the measured value along translational directions were $0.25{\pm}0.18mm$ in the TX direction, $0.25{\pm}0.25mm$ in the TY direction, and $0.36{\pm}0.2mm$ in the TZ direction. Misalignments along the rotational axis were $0.18{\pm}0.08^{\circ}$ in the RX direction, $0.26{\pm}0.09^{\circ}$ in the RY direction, and $0.11{\pm}0.08^{\circ}$ in the RZ direction, it was corrected precisely for any value. Conclusion: Using the YCC QA Set, we were able to verify the error of 6DoF Couch along both the translational and rotational directions in a very simple method. This system would be useful in performing Daily IGRT QA of 6DoF Couch.

• Journal of Nutrition and Health
• /
• v.49 no.5
• /
• pp.277-287
• /
• 2016

Purpose: This study was performed to compare total phenolic contents, in vitro antioxidant capacity, and reduction effect of Korean food groups on ex vivo DNA damage in human cells and analyze correlations between each indicator. Methods: Vegetable foods in the Korean diet based the results of the KNHANES V-2 (2011) were classified into 10 food groups: cereals, fruits, vegetables, nuts, kimchi, seaweeds, potatoes, mushrooms, legumes, and oils. Eighty-four foods constituted more than 1% of the total intake in each food group and finally designated as vegetable foods in the Korean diet. Total phenolic content of each food group was measured. Further, in vitro antioxidant capacity was measured based on DPPH radical scavenging assay, TEAC assay, and $ORAC_{ROO{\cdot}}$ assay. Ex vivo DNA damage in human lymphocytes was assessed using comet assay. Results: Total phenolic contents of food groups of the Korean diet increased in the order of mushrooms, fruits, vegetables, seaweeds, and kimchi. Meanwhile, antioxidant rankings of food groups as mean values from the three in vitro test methods increased in the order of mushrooms, seaweeds, vegetables, kimchi, and fruits. Protection against ex vivo DNA damage in human lymphocytes was highest in mushrooms, followed by vegetables, fruits, seaweeds, and kimchi. The rankings of the food groups for total phenolic content, in vitro DAC, and ex vivo DNA protection activity were similar, and correlations between each indicator were significantly high. Conclusion: Mushrooms, fruits, vegetables, and seaweeds among the tested food groups in the Korean diet showed high total phenolic contents, in vitro antioxidant capacities, and protection against DNA damage. Correlations between each indicator in terms of total phenolic content, in vitro antioxidant capacity, and ex vivo DNA protection between each food group were found to be particularly high.

• Applied Biological Chemistry
• /
• v.39 no.3
• /
• pp.172-176
• /
• 1996

Effect of culture conditions such as pH, temperature, agitation speed and oxygen transfer rate on xylitol production from xylose by Candide parapsilosis ATCC 21019 mutant was investigated in a jar fermentor. The initial concentration of xylosr was fixed at 50 g/l in this experiment. When pH was increased, cell growth and xylose consumption rate were increased, but maximum xylitol production was shown in the range of pH 4.5 and 5.5 with a yield of 0.68 g/g-xylose. The optimal temperature for xylitol production was determined to be $30^{\circ}C$. Considering the importance of dissolved oxygen tension, for xylitol production, the effect of oxygen transfer rate coefficient $(k_La)$ on fermentation parameters was carefully evaluated in the range of $20{\sim}85\;hr{-1}\;of\;k_La$ (corresponding to $100{\sim}300$rpm of agitation speed). The xylitol production was maximized at $30\;hr^{-1}\;of\;k_La$(150 rpm). A higher oxygen transfer rate supported better cell growth with lower xylitol yield. It was determined that maximum xylitol concentration, xylitol yield and productivity was 35.8 g/l, 71.6% and $0.58\;g/l{\sim}hr^{-1}$, respectively, at $30\;hr^{-1}\;of\;k_La$ In order to further increase xylitol productivity, ferementation using the concentrated biomass(20 g/l) was carried out at the conditions of pH 4.5, $30^{\circ}C$ and $30\;hr\;1$ of oxygen transfer rate. The final xylitol concentration of 40 g/l was obtained at 18 hours of culture time. From this result, it was calculated that xylitol yield was 80ft on the basis of xylose consumption and volumetric productivity was $2.22\;g/l{\sim}hr$ which was increased by $3{\sim}4$ fold compared with $0.5{\sim}0.7\;g/l-hr$ obtained in a normal fermentation condition.

• Applied Biological Chemistry
• /
• v.31 no.2
• /
• pp.169-176
• /
• 1988

Lipid contents, fatty acid compositions and free sugar contents of dried ginsengs grown for different years were studied. The lipid and free sugar were separated and quantified by silicic acid column chromatography, thin layer chromatography, gas liquid chromatography and high performance liquid chromatography. Ginseng contained $1.07{\sim}67%$ crude lipid and the hightest lipid content was shown in 3 year old root. The lipid fractions obtained by silicic acid column chromatography were mainly composed of neutral lipid$(51.35{\sim}72.30%)$. The contents of phospholipid and glycolipid in total lipids were $15.03{\sim}34.59%$ and $11.83{\sim}20.72%$, respectively. As the ginseng grew, neutral lipid content increased gradually but glycolipid decreased to the half of the one year old root. Seven components of neutral lipid separated by thin layer chromatography were identified but the other two components were not able to be identified. Triglyceride content was $14.42{\sim}23.91%$, sterol ester and unidentified material(II) were $13.58{\sim}21.26%$ and $7.13{\sim}15.83%$ respectively. The major fatty acids were linoleic acid, palmitic acid, oleic acid and linolenic acid. Linoleic acid content of total and neutral lipid was $61{\sim}65%$ palmitic acid content in phospholipid was $26{\sim}39%$ and one year old root showed the hightest contents. The fatty acid composition of neutral lipid was similar to the pattern of total lipid. Linolenic acid content of glycolipid decreased gradually. Free sugars were composed of rhamnose, fructose, glucose, sucrose, maltose and an unidentified material. The content of sucrose was $92{\sim}94%$ of total free sugars. Two year old root showed the highest sugar content and it decreased since then.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.22-29
• /
• 2001

In Korean high yielding varieties developed by crosses between indica and japonica rice, the most limiting factor for yield may be attributed to the less number of the tillers in the unit area. The goals of this study is to find out the effect of the temperature factors as well as cultural practices on the development and increase of tillers of Dasanbyeo, the high yielding indica crossed japonica cultivar. The effect of temperature was examined under controlled phytotron condition with 6 levels of temperature, 15, 17, 19, 22, 24 and 26$^{\circ}C$, respectively, For the experiment, the leading japonica variety in Korea, Hwaseongbyeo, was used for the check cultivar for the comparison with Dasanbyeo. The high temperature also accelerated the initiation and termination of tiller development. The cultivar difference in the speed of tiller development was observed, for example, more rapid development of tiller in Dasanbyeo than in Hwaseongbyeo was observed at the high temperature range of 24-26$^{\circ}C$, while the vice versa phenomena was observed at lower temperature range of 17-22$^{\circ}C$. The first secondary tiller of Dasanbyeo was observed on the 16, 17, 23, 27 and 38 days after transplanting (DAT) at 26$^{\circ}C$, 24$^{\circ}C$, 22$^{\circ}C$, 19$^{\circ}C$, and 17$^{\circ}C$, respectively. Those of Hwaseongbyeo was 19-22, and 26 DAT at 19-26$^{\circ}C$ and 17$^{\circ}C$, respectively. The last effective tiller of Dasanbyeo was observed on 27-33 DAT for the primary tiller, 20-41 DAT for the secondary tiller. Those of Hwaseongbyeo were 23-40 DAT for primary tiller, and 24-40 DAT for the secondary tiller, and 24-40 DAT for the secondary tiller.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.7 no.1
• /
• pp.20-27
• /
• 2014

Purpose: The purpose of this study was to evaluate coracohumeral distance (CHD) in patients with or without subcoracoid impingement with hypothesis that patients with subcoracoid impingement would have narrower CHD. Materials and Methods: One hundred twenty-four patients with subacromial impingement were evaluated. The subjects with subcoracoid impingement which was affirmed clinically and confirmed by ultrasound guided subcoracoid injection (n=28) was compared with patients with subacromial impingement only (n=96). Patients with stiffness and rotator cuff tear were excluded. Absolute CHD was measured on magnetic resonance imaging (MRI) axial images and on ultrasound with the humerus in neutral position and internal rotation. Also relative ratio of distance difference (RRDD) defined as the difference of CHD in neutral position and internal rotation compared with absolute CHD in neutral on ultrasound was also measured. Results: The distance measured in neutral position was similar between US imaging and MRI (p>0.05) and both measurements did not have significant difference between the two groups (p>0.05). On ultrasound, the difference in CHD in internal rotation between the two groups nearly met the level of significance (p=0.07). No significant difference of CHD difference in two humeral positions was seen between the two groups. However, RRDD value was significantly greater in subcoracoid impingement group (p<0.05). Conclusion: No significant difference of CHD was seen between the subcoracoid impingement group and the control group. RRDD value was greater in subcoracoid impingement group suggesting that individualized coracohumeral distance in internal rotation should be taken into account when assessing patients with subcoracoid impingement.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2003.12a
• /
• pp.543-559
• /
• 2003

The information drive of the businesses requires new alternatives in that the promotion of business efficiency through information process technologies ends up conflicting with the protection of information human rights on laborers’side. Nevertheless, apathy on information protection has a tendency to be distorted by the efficiency of the businesses. Should the capital and mass media warn economic red lights, political circles with uneasiness would ignore the significance of information protection on the behalf of business efficiency. Therefore, the importance of information protection is considered a smaller interest than that of business efficiency with the infringements of human rights on laborers’side arising. Informatization of the businesses along with the developments of information process technologies has enabled the management to monitor and control the behaviors of laborers. This new problem needs to establish both information protection mechanism and institutional devices to regulate those labor controls. The security of business activity without human rights infringement warrants both basic rights of the public and spirit of the Constitution. The study suggests the establishment and revision of laws suitable to the period of information human rights. On top of that, the establishment of the basic law for information protection of individuals’with the common principle that integrates the related laws and rules on-off line is needed. This will warrant the active participation of labor unions and create specific alternatives for information protection.

• Journal of Intelligence and Information Systems
• /
• v.26 no.2
• /
• pp.43-56
• /
• 2020

Recommender systems help users make the best choice among various options. Especially, recommender systems play important roles in internet sites as digital information is generated innumerable every second. Many studies on recommender systems have focused on an accurate recommendation. However, there are some problems to overcome in order for the recommendation system to be commercially successful. First, there is a lack of transparency in the recommender system. That is, users cannot know why products are recommended. Second, the recommender system cannot immediately reflect changes in user preferences. That is, although the preference of the user's product changes over time, the recommender system must rebuild the model to reflect the user's preference. Therefore, in this study, we proposed a recommendation methodology using topic modeling and sequential association rule mining to solve these problems from review data. Product reviews provide useful information for recommendations because product reviews include not only rating of the product but also various contents such as user experiences and emotional state. So, reviews imply user preference for the product. So, topic modeling is useful for explaining why items are recommended to users. In addition, sequential association rule mining is useful for identifying changes in user preferences. The proposed methodology is largely divided into two phases. The first phase is to create user profile based on topic modeling. After extracting topics from user reviews on products, user profile on topics is created. The second phase is to recommend products using sequential rules that appear in buying behaviors of users as time passes. The buying behaviors are derived from a change in the topic of each user. A collaborative filtering-based recommendation system was developed as a benchmark system, and we compared the performance of the proposed methodology with that of the collaborative filtering-based recommendation system using Amazon's review dataset. As evaluation metrics, accuracy, recall, precision, and F1 were used. For topic modeling, collapsed Gibbs sampling was conducted. And we extracted 15 topics. Looking at the main topics, topic 1, top 3, topic 4, topic 7, topic 9, topic 13, topic 14 are related to "comedy shows", "high-teen drama series", "crime investigation drama", "horror theme", "British drama", "medical drama", "science fiction drama", respectively. As a result of comparative analysis, the proposed methodology outperformed the collaborative filtering-based recommendation system. From the results, we found that the time just prior to the recommendation was very important for inferring changes in user preference. Therefore, the proposed methodology not only can secure the transparency of the recommender system but also can reflect the user's preferences that change over time. However, the proposed methodology has some limitations. The proposed methodology cannot recommend product elaborately if the number of products included in the topic is large. In addition, the number of sequential patterns is small because the number of topics is too small. Therefore, future research needs to consider these limitations.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.356-364
• /
• 2007

The purpose of this study was to assess the background color-interceptive ability ana opacity of opaque shade composites (Universal composite, Filtek Z350, Charisma, Clearfil ST, Palpaque Estelite, Esthet-X, and Metafil Flo). Twenty four background specimens (diameter 5.5 mm, thickness 3.0 mm) with Root dentin Mustard (Bisco, Schaumburg, IL, USA) were made. The CIE $L^*a^*b^*$ value of background specimens was measured by a spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Three specimens in every group were filled on the background specimens. The surface color of samples was measured by a spectrophotometer in 3.0 mm and every thickness to 0.5 mm while grinding. The color difference in the background color along with 3.0 mm specimen gauged the masking effect in each thickness while grinding and polishing. The opacity was calculated in 1 mm thick specimens. The opacity was in the decreasing order of Clearfil ST, Metafil Flo, Filtek Z350, Palpaque Estelite, Universal composite, Charisma, and Esthet-X (p < 0.05). As the thickness get reduced, $L^*$ value showed decreasing, $a^*$ increasing tendency. The surface color difference between pair of the 3.0 mm thick specimen and after grinding in same opaque resin was above 3.3 except Clearfil ST and Metafil Flo. The color difference (${\Delta}E^*$) between pair of background specimen and opaque resin built-up specimen showed more than 10.0 regardless kinds and thickness. The variance in opacity characteristics and color of the opaque composites is dependent upon manufacturer. When using the opaque resin, the optical properties of each material must be considered as well as cavity.