• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2007

Combined method of extraction chromatography and liquid scintillation analysis was established for determinating $^{55}Fe\;and\;^{63}Ni$ radioactivity in solid samples. Activated concrete wastes generated from dismantling KRR-2 were analysed. The sequential separation including precipitation and extraction chromatography resulted in the above 90% chemical recoveries of Fe. Above 62% recoveries of Ni were obtained by this procedure exception to 43.6 and 46.5% recoveries. The seperation and counting procedure was also confirmed with spiked samples of known quantity. The measured and spiked quantity were agreed with the 3.7% and 0.7% variations in the $^{55}Fe\;and\;^{63}Ni$ experiments, respectively. The radioactivities of $^{55}Fe$ in the dismantled concretes are shown from below MDA to maximum 362 Bq/g. The radioactivities of $^{63}Ni$ in all concrete samples are below MDA. The $^{63}Ni$ doesn't exist in dismantled concretes from KRR-2. The radioactivity of $^{55}Fe$ is decreased rapidly as the sampling depth is increased from the concrete surface.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.191-201
• /
• 2015

We have studied on the preparation of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloy, the characteristics of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloy by X-ray diffractometer (XRD), pressure composition temperature (PCT) curve, scanning electron microscopy (SEM) and the $H_2-N_2$ gas mixture separation of $TiCo_xFe_{1-x}$(x=0.50~1.00)- stainless steel (SS) composite membranes. The formation of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys with cubic crystal same as TiCo was confirmed by X-ray diffractometer. $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys showed the hysteresis at $120^{\circ}C$. As the Fe content of $TiCo_xFe_{1-x}$(x=0.50~1.00) system alloys increased, the hysteresis was increased both range x=0.90~1.00 and x=0.55~0.60, and the range x=0.55~0.90 gave decreased hysteresis. $TiCo_{0.55}Fe_{0.45}$ alloy was the one showed the lowest hysteresis among them. The lowest value of hydrogen permeation pressure of $TiCo_xFe_{1-x}$(x=0.50~1.00)-SS composite membrane was $TiCo_{0.55}Fe_{0.45}$-SS composite membrane with the value of 2.5 atm at $120^{\circ}C$; otherwise, $TiCo_{0.90}Fe_{0.10}$-SS composite had the highest pressure value among the membranes with the value of 10 atm. $TiCo_{0.55}Fe_{0.45}$-SS composite membrane was the best to separate the $H_2-N_2$ gas mixture excellently among the $TiCo_xFe_{1-x}$(x=0.50~1.00)-SS composite membranes since $TiCo_{0.55}Fe_{0.45}$ had the least hysteresis, and hydrogen permeation pressure was the lowest with value of 2.5 atm.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.463-471
• /
• 2011

A novel $N_2O_2$ Schiff base ligand, N,N'-bis(4-methoxysalicylidene)phenylendiamine(4-$CH_3O$-Salphen), has been synthesized. It has been revealed that the compound is very useful for the spectrophotometric quantification of Fe(II) and Fe(III) ions in aqueous solutions, such as mineral water, hot spring water, sea water, and waste water. The optimum conditions for the quantitative analysis are the followings; [4-$CH_3O$-Salphen]=$4.0{\times}10^{-4}\;M$, DMF/$H_2O$=70/30(v/v), pH=3.4~3.8, T= at $55^{\circ}C$, and prereaction time=1.0 hr. The sample of single valence state was prepared by the preliminary oxidation or reduction using $H_2O_2$ ($5.0{\times}10^{-4}\;M$) and $NH_2OH{\cdot}HCl$ ($5.0{\times}10^{-4}\;M$). The quantitative analyses of Fe(II) and Fe(III) ion were performed by measuring the absorbance at 434 nm and 456 nm, respectively. The estimated mean values agreed well with the standard values within the range of 2.00~6.90%. The limit of detection was 27.9 ng/mL for Fe(II) and 55.8 ng/mL for Fe(III).

• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.293-297
• /
• 1993

Exchange coupled $NiFe/TbCo/Sio_{2}$ thin films for magnetoresistive heads were sputter deposited using RF diode sputtering method, and their magnetic characteristics were measured. TbCo films were deposited using a composite target, which is composed of Tb chips epoxied on a Co target. NiFe($400\AA$)/TbCo($1500\AA$)/$SiO_{2}$($500\AA$) films were deposited using a TbCo target having 30 % of Tb area ratio, which showed 25 Oe of the exchange field without substrate bias and 12 Oe with -55 V of substrate bias. The effective in-plane coercivities of the three layer films fabricated with less than -55 V of substrate bias were approximately proportional to the perpendicular coercivities of the TbCo layer only. The films fabricated with a Theo target of 28 % area ratio showed the same trend. However, the exchange field decreased to 4 Oe without the substrate bias and 7 Oe with -55 V of substrate bias. In the films fabricated with 1000 W of power and the target of 36 % area ratio exhibited 100 Oe of exchange field and 3 Oe of coercivity. As the thickness of NiFe layer increased, the exchange field decreased.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.55-55
• /
• 1993

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.10a
• /
• pp.54-55
• /
• 1995

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.54-55
• /
• 1993

• Journal of Magnetics
• /
• v.13 no.4
• /
• pp.160-162
• /
• 2008

In this work the magnetic anisotropies of magnetostriction material $Tb(Fe_{0.55}Co_{0.45})_{1.5}$ (named a-TerfecoHan) films were investigated with respect to working pressures in the range 1-7 mTorr. The results obtained show that perpendicular magnetic anisotropy (PMA) can be obtained at a working pressure above 5.1 mTorr. XRD was utilized to clarify the origin of the PMA observed in $Tb(Fe_{0.55}Co_{0.45})_{1.5}$ films, and revealed that all samples were amorphous. Therefore, we propose that the PMA effect is explained by stress produced in film due to internal relaxation process and magnetic anisotropy enhancements caused by magnetoelastic interactions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.121-121
• /
• 2015

Fe-44%Ni-2.7%Cu와 Fe-55Ni-0.8%Cu 합금의 $60{\sim}300^{\circ}C$에서의 열팽창계수는 Fe-55%Ni과 유사한 낮은 열팽창계수를 보였으나 Fe-38%Ni-1.5%Cu함금은 약 1,400%로 증가되었고 $600^{\circ}C$ 진공 열처리로써 약 230%로 증가되었다. $0.2N-H_2SO_4$ 용액에서의 부식전위와 부식속도는 각각 $-0.907V_{SHE}$와 $1{\times}10^{-5}A/cm^2$로써 내식성이 향상되는 경향을 보였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.28-28
• /
• 1999