• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.23-31
• /
• 2000

The objective of this study was to develop an effective separation and quantification method for kerosene and diesel in a mixed petroleum fuel (gasoline, kerosene, and diesel) contaminated environmental samples. This investigation was directed to prove the hypothesis that if the source of petroleum fuels were identical, the peak-area ratios of a reference n-alkane to other n-alkane peaks should be a constant even at the different concentrations. In addition, experimental recovery rates were determined to select the reference peaks of kerosene and diesel for peak area ratio measurements. The experimental results showed that the peak area ratios were constant among the samples having different concentrations when the ratios were calculated from areas of $C_{l3}$, $C_{l4}$, and $C_{15}$ peaks for kerosene and $C_{l6}$ and $C_{l7}$ peak for diesel as reference n-alkane peaks. The recovery rates were evaluated by comparing the relative peak area ratios of each reference peaks after making pairs of the kerosene and diesel reference peaks in the samples contained a known amount of gasoline, kerosene, and diesel. The recovery rates(%) Were 107.0$_{{\pm}20.6}$/86.6/ sub $\pm$15.9/ for kerosene- $C_{13}$/diesel- $C_{16}$, 99.6$\pm$$_{17.2}$/86.6$_{{\pm}15.9}$ for kerosene- $C_{14}$/diesel- $C_{16}$, 73.9/$\pm$14.4//86.6$_{{\pm}sub 15.9}$ for kerosene- $C_{15}$ /diesel- $C_{16}$, 109.4$_{{pm}0.8}$/75.9$_{{pm}4.7}$ for kerosene- $C_{13}$/diesel- $C_{17}$, 107.4$_{{pm}7.9}$/75.9$_{{pm}4.7}$ for kerosene- $C_{14}$/diesel- $C_{17}$, and 95.7$_{{pm}4.6}$ /75.9/$\pm$14.6//75.9$_{{pm$}4.7}$ for kerosene- $C_{15}$ /diesel- $C_{17.}$ The above experimental results confirm that all of the reference peak pairs of kerosene and diesel are applicable to the quantitative analysis for the mixed fuel contaminated samples, but the kerosene- $C_{15}$ /diesel- $C_{l7}$ peaks are recommended since the pair has a lower standard deviation than the other pairs.s..s.s.s..s..s.s.s.s.s.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.22-26
• /
• 1983

P+N and P+NN+ solar cells with the area of 3.36 $\textrm{cm}^2$ were fabricated by thermal diffusion. Under the light intensity of 100 mW/$\textrm{cm}^2$, total area(active area) conversion efficiency was 13.4%(14.7%) for P+N cell fabricated by 15 min boron predeposition at 94$0^{\circ}C$ and 20 min annealing at 80$0^{\circ}C$, and 14.3%(15.6%) for P+NN+ cell processed by 15 min boron predeposition at 94$0^{\circ}C$ and 50 min annealing at 80$0^{\circ}C$ after 20 min back phosphorus diffusion at 1,05$0^{\circ}C$. The minority carrier lifetime in bulk of P+NN+ cells was increased about 2~3 times comparing with P+N cells because of guttering and BSF effect due to back phosphorus doping. The methods used for efficiency improvement were AR coating, Ag electroplating, back doping and fine grid pattern as well as the control of front doping profile.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.212-221
• /
• 2008

In order to investigate the information for effective detection and developing of latent fingerprints, we identified fatty acids composition of latent fingerprints on non-porous evidence surface and the chemical changes of latent fingerprint residue after print deposition during 7 months. Fingerprints from eight Korean male donors (aged 29-50 years) and one female donor (aged 36 years) were collected. All fingerprints were found to contain lauric acid (C12:0), myristic acid (C14:0), palmitic acid (C16:0), stearic acid (C18:0), elaidic acid (C18:1n9t), oleic acid (C18:1n9c), linoleic acid (C18:2n6c), arachidic acid (C20:0), linolenic acid (C18:3n3), erucic acid (C22:1n9) and docosadienoic acid (C22:2) and primarily palmitic acid (35.45-48.37%), oleic acid (14.84-28.49%), stearic acid (9.71-24.96%) and linoleic acid (7.68-18.8%) occupied 75% of total fatty acids. When the fingerprints were deposited at dark room for 7 months, total fatty acids components decreased about 12-25%. It can be explained that significant degradation of long-chain fatty acids such as elaidic acid (C18:1n9t), arachidic acid (C20:0), linolenic acid (C18:3n3), erucic acid (C22:1n9), and docosadienoic acid (C22:2) resulted in the generation of myristic acid (C14:0), myristoleic acid (C14:1) and pentadecanoic acid (C15:0).

• ALGAE
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2004

Carbon ($^{14}CO_2$) and nitrogen ($^{15}NH_4$ and $^{15}NO_3$) uptake were measured at two stations in the hypertrophic zone of the Seonakdong River, where Microcystis aeruginosa explosively bloomed in September 1998. Significant nitrogen limitation occurred in the period of Microcystis bloom, while phosphorus limitation was common in the river. The specific nitrogen ($NH_4$ + $NO_3$) uptake was 12-50 $\mu$mol mg chl-a$^{-1}$ hr$^{-1}$ at two stations, showing substantially higher than for any other freshwaters. The specific nirtogen uptake was higher at the GAR Station of the nitrogen-limited area and this high nirtogen uptake resulted in low $^{14}C:^{15}N$ atomic ratios of algal uptake. Carbon uptake was dependent upon irradiance, decreasing gradually toward the bottom in the euphotic zone, whereas the nitrogen uptake increased slightly toward the bottom. $NH_4$ preferable uptake against $NO_3$ was hardly discemilble due to the fact that it exceeded the $NH_4$ ambient concentraiton. The $^{14}C:^{15}N$ atomic ratios of algal uptake in the surface waters approached the Redfield C:N ratio.

• Journal of the Korean Vacuum Society
• /
• v.11 no.3
• /
• pp.151-158
• /
• 2002

Fabricated were ultra-shallow $p^+-n$ junctions on n-type Si(100) substrates using decaborane $(B_{10}H_{14})$ ion implantation. Decaborane ions were implanted at the acceleration voltages of 5 kV to 10 kV and at the dosages of $1\times10^{12}\textrm{cm}^2$.The implanted specimens were annealed at $800^{\circ}C$, $900^{\circ}C$ and $1000^{\circ}C$ for 10 s in $N_2$ atmosphere through a rapid thermal process. From the measurement of the implantation-induced damages through $2MeV^4 He^{2+}$ channeling spectra, the implanted specimen at the acceleration voltage of 15 kV showed higher backscattering yield than those of the bare n-type Si wafer and the implanted specimens at 5 kV and 10 kV. From the channeling spectra, the calculated thicknesses of amorphous layers induced by the ioin implantation at the acceleration voltages of 5 kV, 10 kV and 15 kV were 1.9 nm, 2.5 nm and 4.3 nm, respectively. After annealing at $800^{\circ}C$ for 10 s in $N_2$ atmosphere, most implantation-induced damages of the specimens implanted at the acceleration voltage of 10 kV were recovered and they exhibited the same channeling yield as the bare Si wafer. In this case, the calculated thickness of the amorphous layer was 0.98 nm. Hall measurements and sheet resistance measurements showed that the dopant activation increased with implantation energy, ion dosage and annealing temperature. From the current-voltage measurement, it is observed that leakage current density is decreased with the increase of annealing temperature and implantation energy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.4
• /
• pp.284-291
• /
• 2001

To study whether N isotope composition (${\delta}^{15}N$) of crop reflects the kind of fertilizer (chemical or organic) applied to field, a pot experiment was conducted. Corn (Zea mays L.) was cultivated under greenhouse conditions for 70 days. Composted pig manure and urea were applied at 0 and 0 (C0U0), at 0 and 300 (COU2), at 300 and 0 (C2U0) and at 150 and $150kg\;N\;ha^{-1}$ (C1U1), respectively. The ${\delta}^{15}N$ values of composted pig manure and urea were + 13.9‰ and -2.3‰, respectively. The ${\delta}^{15}N$ values of whole parts (roots + stems + leaves + grains) were + 12.7, + 12.9, + 14.0 and + 13.0‰ for C0U0, C0U2, C2U0 and C1U1 treatments, and were not significantly affected by the application of isotopically different N sources (P<0.05). However, leaves or grains showed significantly (P<0.05) different ${\delta}^{15}N$ values between treatments. The ${\delta}^{15}N$ values of leaves and grains were + 14.3 and + 16.2‰ for C2U0, +13.2 and +13.9‰ for C0U0, +10.1 and + 12.6‰ for C1U1 and +10.1 and +12.4‰ for C0U2 treatments. The different ${\delta}^{15}N$ values of corn from the values of N sources (compost and urea) applied to soil showed that the ${\delta}^{15}N$ values of corn were affected not only by the isotope composition of N source, but also by N pool mixing and isotope fractionation accompanying N transformation. This study suggests that although the ${\delta}^{15}N$ values of crop are not identical to the ${\delta}^{15}N$ values of N sources applied to fields, the application of isotopically different N sources such as compost and chemical fertilizer may result in qualitative difference in ${\delta}^{15}N$ values of crop.

• Journal of Pharmacopuncture
• /
• v.7 no.2
• /
• pp.57-64
• /
• 2004

This study was carried to identify the component of Small Intestine Meridian Muscle in human, dividing the regional muscle group into outer, middle, and inner layer. the inner part of body surface were opened widely to demonstrate muscles, nerve, blood vessels and the others, displaying the inner structure of Small Intestine Meridian Muscle. We obtained the results as follows; 1. Small Intestine Meridian Muscle is composed of the muscle, nerve and blood vessels. 2. In human anatomy, it is present the difference between a term of nerve or blood vessels which control the muscle of Meridian Muscle and those which pass near by Meridian Muscle. 3. The inner composition of meridian muscle in human arm is as follows ; 1) Muscle ; Abd. digiti minimi muscle(SI-2, 3, 4), pisometacarpal lig.(SI-4), ext. retinaculum. ext. carpi ulnaris m. tendon.(SI-5, 6), ulnar collateral lig.(SI-5), ext. digiti minimi m. tendon(SI-6), ext. carpi ulnaris(SI-7), triceps brachii(SI-9), teres major(SI-9), deltoid(SI-10), infraspinatus(SI-10, 11), trapezius(Sl-12, 13, 14, 15), supraspinatus(SI-12, 13), lesser rhomboid(SI-14), erector spinae(SI-14, 15), levator scapular(SI-15), sternocleidomastoid(SI-16, 17), splenius capitis(SI-16), semispinalis capitis(SI-16), digasuicus(SI-17), zygomaticus major(Il-18), masseter(SI-18), auriculoris anterior(SI-19) 2) Nerve ; Dorsal branch of ulnar nerve(SI-1, 2, 3, 4, 5, 6), br. of mod. antebrachial cutaneous n.(SI-6, 7), br. of post. antebrachial cutaneous n.(SI-6,7), br. of radial n.(SI-7), ulnar n.(SI-8), br. of axillary n.(SI-9), radial n.(SI-9), subscapular n. br.(SI-9), cutaneous n. br. from C7, 8(SI-10, 14), suprascapular n.(SI-10, 11, 12, 13), intercostal n. br. from T2(SI-11), lat. supraclavicular n. br.(SI-12), intercostal n. br. from C8, T1(SI-12), accessory n. br.(SI-12, 13, 14, 15, 16, 17), intercostal n. br. from T1,2(SI-13), dorsal scapular n.(SI-14, 15), cutaneous n. br. from C6, C7(SI-15), transverse cervical n.(SI-16), lesser occipital n. & great auricular n. from cervical plexus(SI-16), cervical n. from C2,3(SI-16), fascial n. br.(SI-17), great auricular n. br.(SI-17), cervical n. br. from C2(SI-17), vagus n.(SI-17),hypoglossal n.(SI-17), glossopharyngeal n.(SI-17), sympathetic trunk(SI-17), zygomatic br. of fascial n.(SI-18), maxillary n. br.(SI-18), auriculotemporal n.(SI-19), temporal br. of fascial n.(SI-19) 3) Blood vessels ; Dorsal digital vein.(SI-1), dorsal br. of proper palmar digital artery(SI-1), br. of dorsal metacarpal a. & v.(SI-2, 3, 4), dorsal carpal br. of ulnar a.(SI-4, 5), post. interosseous a. br.(SI-6,7), post. ulnar recurrent a.(SI-8), circuirflex scapular a.(SI-9, 11) , post. circumflex humeral a. br.(SI-10), suprascapular a.(SI-10, 11, 12, 13), first intercostal a. br.(SI-12, 14), transverse cervical a. br.(SI-12,13,14,15), second intercostal a. br.(SI-13), dorsal scapular a. br.(SI-13, 14, 15), ext. jugular v.(SI-16, 17), occipital a. br.(SI-16), Ext. jugular v. br.(SI-17), post. auricular a.(SI-17), int. jugular v.(SI-17), int. carotid a.(SI-17), transverse fascial a. & v.(SI-18),maxillary a. br.(SI-18), superficial temporal a. & v.(SI-19).

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.919-923
• /
• 1999

The edible portions of saury were cooked by pan frying, deep fat frying, steaming and microwave cooking to compare the compositions of fatty acids in cooked fish with those in raw fish. The total lipid in saury studied varied by each fish but ranged from 21.87% to 30.63%. The distribution of each fatty acid (average) was in order; $C_{22:1}\;(21.75%)>C_{20:1}\;(15.81%)>C_{16:0}\;(11.75%)>C_{22:6}\;(DHA,\;10.61%)>C_{14:0}\;(7.04%)>C_{20:5}\;(EPA,\;5.13%)$. The average ratio of PUFA (polyunsaturated fatty acids)/SFA (saturated fatty acids) in saury fillet was 1.07 and that of n-3/n-6 was 9.15, which showed saury might be a good source for PUFA including n-3 fatty acids. Comparing the effects of cooking on EPA and DHA, two of the most important n-3 PUFA, the decreasing rate of EPA were 6.98% (pan frying), 26.93% (deep fat frying), 1.16% (steaming) and 15.12% (microwave cooking), respectively. The decreasing rate of DHA ware 4.30% (pan frying), 15.99% (deep fat frying), 3.26% (steaming) and 9.56% (microwave cooking). This study showed that both EPA and DHA were reduced by steaming least, and pan frying, microwave cooking, deep fat frying most, in order.

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.83-87
• /
• 2004

An organometallic complex. $Me_2Pt(PPh_2CH_2C(t-Bu)=N-N=CMe(2-py)-\kappa^2N,P)$ was synthesized from phosphinohydrazone $Ph_2PCH_2C(t-Bu)=NNH_2$, 2-acetylpyridine, and $[PtMe2({\mu}-SMe_2)]_2$. The molecular structure of this complex has been determined by X-ray diffraction. Crystallographic data: monoclinic, space group $P2_1/n,\;a=11.6926(7)\;{\AA},\;b=15.6607(19)\;{\AA},\; c=14.6125(6)\;{\AA},\;\beta=93.018(4)^{\circ},\;Z=4,\;V=2672.0(4)\;{\AA}^3$. The structure was solved by direct methods and refined by full-matrix least-squares methods to give a model with a reliability factor R = 0.0363 for 5238 reflections.