• The Journal of the Korean Society for Microbiology
• /
• v.21 no.4
• /
• pp.487-501
• /
• 1986

Previous studies from our laboratory suggested that Korean LJP patients might habor A. actinomycetemcomitans of different serotype from Caucasian LJP patients in whom serotype b was predominant. In order to observe the prevalence and serotype distribution of A. actinomycetemcomitans in localized juvenile periodontitis patients and to evaluate leukotoxic activity of oral isolates, this study was performed. A. actinomycetemcomitans was isolated by using a selective medium(tryptic soy agar supplemented with 10% serum, $75{\mu}g$ of bacitracin and $5{\mu}g$ of vancomycin per ml). Using immunoabsorbed, ammonium sulfate-fractionated serotype-specific antisera, a total of 69 strains were serologically categorized by ELISA. Leukotoxicity was monitored biochemically by measuring lactate dehydrogenase indicator of cell viability in culture supernatant of PMNL plus viable A. actinomycetemcomitans mixture. The results were as follows: 1. A. actinomycetemcomitans was detected in 75% of 16 LJP patients, and 71% in the LJP lesions and 6% in the control sites. 2. Presence or absence of A. actinomycetemcomitans in the sampled disease sites has no in fluence on clinical measurements. 3. Three serotypes were approximately equally distributed in overall 9 patients. Three patients harbored 2 different serotypes of A. actinomycetemcomitans in the same disease site or different disease sites. 4. The proportion of leukotoxic oral isolates was 22% of a total of 46 strains and the prevalence was 69% in 13 sampled sites. The same disease site could harbor both leukotoxic and nonleukotoxic strains. 5. Distribution of leukotoxic strains in 3 serotypes were not different.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.77-85
• /
• 2008

Grazing rates (GR) and pseudofaeces production (PFP) of native snail, Chinese mystery snail (Cipangopaludina chinensis malleata Reeve) on natural colonial morphs of Microcystis aeruginosa was measured. C. chinensis was collected from the upstream of the Geum River (Boryeong, Korea), where they co-habituated with Unio douglasiae and Lanceolaria acrorhyncha. The experiments were performed to evaluate the GR and PFP at different conditions such as; incubation time (1, 3, 5, 7, 9 and 11 hr), body size (3 to 6.1 cm, n=28), snail density (0.5, 1, 1.5 and 2.0 ind. $L^{-1}$) and prey concentration (168.3, 336.7, 505.0 and $673.0{\mu}g\;Chl-{\alpha}L^{-1}$). All experiments were triplicated, and conducted in transparent acrylic vessel (3L in volume). Regarding feeding time, a highest GR (0.538L $gAFDW^{-1}h^{-1}$) and PFP $(7.18mgAFDW^{-1})$ appeared at 1hr and 7hr after snail stocking, respectively. Interestingly, the snail, smaller than 4.5cm in body size, showed a wide range of GR ($-4.173{\sim}1.087L\;gAFDW^{-1}h^{-1}$) for the initial period (1 and 4hrs of stocking), compared to those greater than 4.5cm, which showed a stable FR, higher than 0.5L $gAFDW^{-1}h^{-1}$. Upon density effect, the density of 1.5 ind. $L^{-1}$ induced the most effective inhibition on Microcystis biomass with highest PFP. On the prey concentration, highest GR (0.897L $gAFDW^{-1}h^{-1}$) and PFP (3.67 mg $gAFDW^{-1}h^{-1}$) were induced at the level of $168.3{\mu}g\;Chl-{\alpha}L^{-1}$ and $673{\mu}g\;Chl-{\alpha}L^{-1}$, respectively. GR and PFP of this freshwater snail on the cyanobacterial bloom (M. aeruginosa) varied with the feeding conditions, and they were comparatively high for a short period of time less than 7hrs regardless of the stocking condition. Our results suggest that this freshwater snail has a potential to control cyanobacterial bloom when provided with suitable condition.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.75-84
• /
• 2011

We examined the effect of the turbid water on the periphytic diatom community in an artificial stream system. The artificial stream was constructed with transparent acryl and composed of four channels. Each channel ($20\;cm{\times}200\;cm{\times}40\;cm$) was supplied continuously with eutrophic lake water. In order to the freely colonize and grow diatoms, artificial substrate was installed with commercial slide glass soaked in 1% agar. Prior to introducing turbid water, the artificial stream was operated with lake water for 6 days to permit the propagation of diatom community on the substrates. The turbid water prepared with sediment sieved with ${\varphi}$ $64\;{\mu}m$ at $2\;g\;L^{-1}$ (final concentration, 300 NTU) was provided daily for 50 minute duration. The experiment was conducted for 7 days with manipulated experimental condition of light ($50{\sim}80\;{\mu}mol\;m^{-2}s^{-1}$, light:dark=24:0), temperature ($10{\pm}1^{\circ}C$), and flow rate ($0.31\;cm\;s^{-1}$). Sampling and analysis were conducted daily for water quality and diatom. Turbidity of the water varied 162.2~173.2 NTU during the experiment. After introduction of turbid water, DO, pH and TN were decreased, while SS and TP increased significantly. A total of 14 genera and 47 species of diatoms was observed on the artificial substrates during the experimental period. Of these, Navicula appeared to be a most dominant genus with 10 species, followed by Cymbella (6 species), Fragilaria (6 species) and Gomphonema (5 species). Achnanthes minutissima was the most dominant species (>70% of total frequency) in both control and treatment experiments. Increase in diatom abundance lasted for three days since turbid water introduction, after that they gradually decreased by the termination of the experiment. These results suggest that frequent supply of highly-concentrated turbid water significantly decreases the periphytic diatom community, and retard the recovery of the stable food-web within the stream.

• Journal of Animal Environmental Science
• /
• v.15 no.1
• /
• pp.9-16
• /
• 2009

This study, tasting 14 months, was conducted to investigate the effects of different pen size and group size on growing-fattening characteristics of Hanwoo steers. Forty-eight, 12-month-old Hanwoo steers($305.8{\pm}32.2\;kg$) were randomly assigned to three groups($35.28\;m^2$; n=4 heads, $70.56\;m^2$; n=8 heads, $105.84\;m^2$; n=12 heads) and reared in separate pens with a constant space allowance of $8.82m^2$ per head from 12 to 21 month of age and then regrouped to 4 heads per pen. A common diet including concentrate(limited) and forage(ad lib) was provided to all the animals. Images of live animal ultrasonic back fat thickness, longissimus muscle area and Marbling score were evaluated in three months interval from 12 months of age using an ultrasound equipment(HS-2000) at the 13th rib and lumber vertebra interface of left side. Significant differences of ADG was found mainly at $15{\sim}18$ month and $18{\sim}21$ month fattening stages(p<0.05). Marbling score(MS) was higher(p<0.05) in 12 heads group when compared with that of 4 and 8 heads groups after 18 months. Animals in 12 heads group had the lowest Average daily gain(ADG) but showed the highest longissimus muscle area(LMA) and marbling score(MS). In addition, Hanwoo steers in 12 heads group obtained a higher quality appearance(HQA) of 82.7% than that of other treatments. The results indicated that Hanwoo steers housed on large group size and pen size decreased their ADG but improved meat quality.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.80-88
• /
• 2003

Object The purpose of this study were to evaluate the microtensile bond strength of resin fiber reinforced post to radicular dentin using resin cement according to various dentin surface treatment and to observe the inter face between post and root dentin under SEM Material and Method A total 16 extracted human single rooted teeth were used. A lingual access was made using a #245 carbide bur in a high-speed handpiece with copious air water spray. The post space was mechanically enlarged using H-file(up to #60) and Gates Glidden bures(#3). This was followed by refining of the canal space using the calbrating drill set provided in ER Dentinpost(GEBR, BRASSELER GmbH&Co. KG). The 16 teeth were randomly distributed into 4 group of 4 teeth. Group 1 teeth had their post space prepared using 10% phosphoric acid as root canal surface treatment agent during 20s. The canal was then rinsed with saline and dried with paper point. Group 2 teeth had their post space prepared using 3% NaOCl as root canal surface treatment agent during 30min. The canal was then rinsed with saline and dried with paper point. Group 3 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. The canal was then rinsed with saline and dried with paper point. Group 4 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. After rinsing with saline, the canal was rinced 10m1 of 3% NaOCl for 30min. After drying with paper point, the post(ER Dentinpost, GEBR, BRASSELER GmbH&Co. KG) was placed in the treated canals using resin cement. Once the canal was filled with resin cement(Super bond C&B sunmedical co. Ltd.), a lentulo was inserted to the depth of the canal to ensure proper coating of the root canal wall. After 24 hours, acrylic resin blocks($10{\cdot}10{\cdot}50mm$) were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strengths for each stick was measured with Microtensile Tester. Failure pattern of the specimen at the interface between post and dentin were observed under SEM. Results 1. Tensile bond strengths(meen{\pm}SD$) ) were expressed with ascending order as follows group 4, $12.52{\pm}6.60$ ; group 1, $7.63{\pm}5.83$ ; group 2, $4.13{\pm}2.31$ ; group 3, $3.31{\pm}1.44$. 2. Tensile bond strengths of Group 4 treated with 17% EDTA +3%NaOCl were significant higher than those of group 1, 2 and 3 (p<0.05). 3. Tensile bond strengths of Group 1 treated with 10% phosphoric acid were significant higher than those of group 2 (p<0.05). Tensile bond strengths of Group 4 treated with 17% EDTA +3% NaOCl was significant higher than those of other groups.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.79-87
• /
• 2005

The ovaries from Hanwoo and Holstein were collected from labattoir and transferred to laboratory. Oocytes were aspirated and incubated in $CO_2$ incubator for 24 hours for maturation. Oocytes were coincubated with the sperms for 5 hours. Cleaved oocytes were selected 48 hours after coincubation and half of the medium was changed newly every 48 hour until blastocyst formation. Cleavage rate and blastocyst rate were investigated according to different breeds and different status of cumulus cells surrounding the oocytes. Blastocysts were either transferred to the recipients or frozen until use. The result of embryo transfer with fresh or frozen embryos was investigated. The rate of male offspring following embryo transfer was also investigated. The rate of cleavage was $66.4\%$ for Hanwoo and $62.4\%$ for Holstein oocytes. The rate of cleavage according to status of oocyte was shown highest in the oocytes completely surrounded with cumulus cells and lowest in denuded oocytes for both Hanwoo and Holstein oocytes. The rate of blastocyst from cleaved oocytes was $40.6\%$ for Hanwoo and $36.9\%$ for Holstein. The rate of pregnancy/delivery following embryo transfer with fresh IVF embryos was $57.2\%$ for Hanwoo and $53.3\%$ for Holstein. The rate of pregnancy/delivery following embryo transfer with frozen IVF embryos was $40.9\%$ for Hanwoo and $36.4\%$ for Holstein. The rate of male calf produced by embryo transfer was $63.6\%$ for Hanwoo and $50.0\%$ for Holstein.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.217-224
• /
• 2004

This study was carried out to select the promising forage crops for forage production in paddy field of HARI, RDA, Iksan from 1999 to 2001. The species of forage crop used in this experiment were barley(5 varieties), wheat(2), rye(3) and Italian ryegrass(IRG, 3). Stage of heading, milk and yellow ripe of barley were 26 $April{\sim}l$ May, middle May and late May, respectively. In milk to yellow ripe stage, dry matter(DM) yield of barley was $6.64{\sim}10.47$ MT per ha, and averaged ADF and NDF contents were $31.6\%\;and\;62.2\%$ respectively. Albori was the most promising variety among the barley). The growth of wheat was a little late compared to that of barley, but it seemed to be crop having higher forage yield md nutritive value. In milk to yellow stage, DM yield of wheat was $7.51{\sim}11.96$ MT per ha, and nutritive value of wheat was high(ADF $30.6\%$ and NDF $60.1\%$). Heading stage of rye was $25{\sim}27$ April, and it seemed to be suitable to harvest at heading to flowering stage because of heavy lodging after flowering. In flowering stage, DM yield of rye was 17.26 MT per ha, and nutritive value of rye was the lowest among 4 species(ADF $38.6\%$ and NDF $65.5\%$). Heading stage of early maturing IRG was 30 April and it seemed to be suitable for harvest at flowering stage of middle May in cropping system. In flowering stage, DM yield of early type IRG was 10.77 MT per ha, and averaged ADF and NDF contents were $31.6\%\;and\;59.2\%$, respectively. The results demonstrated that the promising forage crops for forage production in paddy field were rye, barley, early maturing IRG and wheat in Honam region. In Southern region, rye harvesting at early May was recommended when considered middle May of rice transplanting period, and barley(Albori) and early maturing IRG harvesting at middle May were recommended when considered late May of rice planting period. And also, wheat with high nutritive value and possibility for harvesting at late May were recommended in case of transplanting period at early June.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.

• Journal of Aquaculture
• /
• v.20 no.1
• /
• pp.51-55
• /
• 2007

This study was conducted to evaluate the muscle quality of the olive flounder fed on extruded pellet (EP) diets compared with a raw fish moist pellet (MP) diet for olive flounder, Paralichthys olivaceus in a commercial scale for a year. The sensory and physical qualities and palatable compounds were compared for evaluation of muscle quality in fish. Four diets were formulated for this experiment: two experimental EP diets (EP 1 and 2), one commercial EP diet (CEP) and MP diet. Crude lipid of fish fed EP1 and EP2 was significantly higher (P<0.05) than that of fish fed CEP, but not significantly different from that of fish fed MP (P>0.05). In the palatable compounds, the free amino acids composition were much alike in that of all the diets. Proline, glycine and alanine from fish fed diet EPs were the most abundant compound among amino acid compositions. There was little difference in the free amino acid compositions of all flounder from localities and the growing conditions between wild and cultured fishes. Taurine of fish fed EP1 was dominantly high over that of fish fed EP2, CEP and MP. In all nucleotides and their related compounds, ATP and IMP from fish fed EP diets were higher (P<0.05) than those of fish fed MP. In the sensory score, overall-acceptability of fish fed EP2 were significantly higher (P<0.05) than that of fish fed EP1, CEP and MP. Hardness of physical properties from fish fed EP2 was significantly higher (P<0.05) than those of fish fed CEP (P<0.01). These results strongly suggest that diets EP could be developed to replace MP diet for the grow-out stage of olive flounder without adverse effect on growth performance.