• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.739-744
• /
• 2000

YAG(Y3Al5O12) as host material of YAG:Tb3+ was studied via hydrothermal synthesis of metal hydroxides. We changed the kind of mineralizer, the concentrations and process conditions in hydrothermal synthesis. As a result, we found, acicular YAG powders were obtained by the use of KOH as a mineralizer, the concentration of KOH affected the shape and size of YAG powder. Fine grained YAG were perpared by the use of NH4OH as a mineralizer and the concentration of NH4OH affected crystal phases but did not affect particle size. We could finally get the spherical looking YAG powder at 8 M NH4OH and at 35$0^{\circ}C$ for 12h. The average particle size was about 0.2${\mu}{\textrm}{m}$.

• 폴리머
• /
• 제24권5호
• /
• pp.629-637
• /
• 2000

Hydroxypropyl cellulose와 ammonium persulfate를 각각 입자안정제와 개시제로 사용하여 t-butyl alcohol/$H_2O$ 흔합 분산매에서 아크릴아미드의 분산중합을 다양한 중합 조건하에서 수행하여 생성되는 poly(acrylamide)(PAM) 라텍스의 평균입자경, 라텍스 고분자의 점도평균분자량, 수용화 정도 등을 관찰하였다. 일반적으로 PAM 라텍스의 평균입자경은 개시제의 농도, 분산매 중 물의 농도, 중합 온도가 증가함에 따라, 또는 단량체의 농도, 입자안정제의 농도가 감소함에 따라 증가하였다. 라텍스상태로 얻어진 PAM 고분자의 점도평균분자량은 단량체의 농도, 입자 안정제의 농도, 분산매 중 물의 농도가 증가함에 따라, 또는 개시제의 농도, 중합 온도가 감소함에 따라 증가하였다. 본 연구에서 얻어진 PAM 라텍스는 0.1~0.5 $\mu\textrm{m}$의 평균입자경과 470000~2080000의 점도평균분자량을 나타내었으며 이들은 물에서 순간적으로 수용화되었다.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1169-1177
• /
• 1995

Barium nitrate and yittrium nitrate were dissolved into distilled water. Titaium hydroxide precipitated from titanium chloride with NH4OH was dissolved into nitric acid. Each aqueous solution was mixed for 12 hr in the composition of Ba1-xYxTiO3 (x=0.1∼0.6) and the concentration of mixed solution was 0.1 mol/ι. The mixed solution was sprayed with an ultrasonic atomizer and carried into an electric furnace which was kept at 900∼1000$^{\circ}C$ and pyrolyzed. Pyrolyzed powders were collected on the glass filter with vacuum pump. Aqueous Mn solutiion was added into the synthesized powders, mixed with ultrasonic vibration and sintered at 1300∼1400$^{\circ}C$. Synthesized powders were characterized with SEM, XRD, DT-TGA, and BET. Microsture and resistivity of sintered body were investigated with SEM and multimeter. The results of this experiment were as follows; 1) Yittrium dooped BaTiO3 powders were synthesized above 950$^{\circ}C$. 2) The average particle sizes of powders from BET specific surface area and SEM were 0.045$\mu\textrm{m}$, 0.046$\mu\textrm{m}$ respectively. The particle size distribution was narrow in the range of 0.1∼1.0$\mu\textrm{m}$ from SEM. 3) Room temperature resistivity and pmax/pmin of 0.4 mol% Y doped specimen which was sintered at 1375$^{\circ}C$ were 102∼3 (Ω$.$cm) and 102∼3 respectively. 4) Room temperature resistivity and pmax/pmin of 0.4 mol% Y and 0.04 at% Mn added specimen which was sintered at 1375$^{\circ}C$ were 102∼3 (Ω$.$cm) and 106∼7 respectively. 5) Grain growth was inhibited with addition of Y2O3 and enhanced in addition of Mn by 0.05 atm%.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.403-409
• /
• 1992

The titania membrane thickness coated on the porous alumina support by the sol-gel method was analyzed using the slipcasting model. The thickness of calcined membrane layers increased linearly from 1.3 to 3.8 ${\mu}{\textrm}{m}$ with the square root of the dipping time (4~40 min). Growth rates of the thickness of wet gels and calcined layers were well described quantitatively by the slipcasting model. Through the regression of experimental data using model equations, the permeability and the pressure drop across wet gels, and the thickness and their growth rate constants of wet gels and calcined layers could be determined. It was also known that the gellation concentration of the TiO2 sol used in this work and the porosity of wet gel layes were 25 mol/ι and 0.53, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E4호
• /
• pp.177-186
• /
• 2003

The total of 1,454 aerosol samples were collected by high volume tape sampler at the Gosan Site in Jeju Island from 1992 to 1999, and the major water-soluble ionic components were chemically analyzed. The mean concentrations of nss-S $O_4$$^{2-}$, N $H_4$$^{＋}$, and N $O_3$$^{[-10]}$ showed high values, which were 6.73, 1.45, and 1.45 ${\mu}{\textrm}{m}$/㎥, respectively, while $Ca^{2+}$ and $K^{+}$ concentrations were low with the values of 0.49 and 0.42 $\mu\textrm{g}$/㎥. The concentrations of most components increased in spring but decreased in summer, especially with the remarkable increase of $Ca^{2+}$ and N $O_3$$^{[-10]}$ concentrations in spring. The seasonal comparison of nss-S $O_4$$^{2-}$ concentrations showed higher values with the order of spring > fall 〉 winter〉 summer, but spring 〉 winter〉 fall 〉 summer for N $O_3$$^{[-10]}$ Meanwhile, the concentration levels of N $a^{+}$ and C $l^{[-10]}$ increased more in winter season. According to the investigation of wind direction effect, the concentrations of most aerosol ionic components showed higher values consistently at the westerly and northerly wind conditions. Based on the factor analysis, the atmospheric aerosols in the Gosan Site are considered to be largely affected by marine sources, followed by anthropogenic and soil sources.urces..

• 약학회지
• /
• 제44권3호
• /
• pp.213-223
• /
• 2000

SD-994 was prepared from methanol extract of Artemisia argyi by stepwise purification of solvent partioning and silica gel chromatography. In the course of this purification, fractions obtained at each step were investigated for their cytotoxicities against L1210 cells. Fractions A~G prepared from chloroform fraction showed considerable cytotoxicities raging 40~90% against L1210 cells. Subfractions I~IX obtained from fraction A exhibited various cytotoxicities and subfraction I (SD-994) was found to be the most effective compound. $IC_{50}$ values of SD-994 were measured to be $0.5{\;}{\mu\textrm{g}}/ml and less than $0.05{\;}{\mu\textrm{g}}/ml against L1210 cells and normal lymphocytes, respectively: When SD-994 was added to L1210 cell as cytotoxic agent, significantly increased amount of superoxide ($O_2^-$) and dramatically augmented activities of superoxide dismutase (SOD), specially MnSOD and glutathione peroxidase (GPx) were observed according to the concentration and incubation time. Whereas, in case of normal lymphocytes under the same condition, cytotoxicities were not apparent and the generation of superoxide ($O_2^-$) or the activity changes of SOD and GPx were insignificant. These results together indicate that the cytotoxic action of SD-994 against L1210 cell may be achieved via necrosis and/or apoptosis induced by reaction oxygen species which could not probably be completely abolished even by drastically increased antioxidant enzymes, SOD and GPx activities.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1144-1149
• /
• 2001

본 연구에서는 화염가수분해증착법(Flame Hydrolysis Deposition : FHD)을 이용하여 실리콘(Si)/실리카(SiO$_2$) 광도파막을 제조하고, 이 박막에 Solution Doping 법을 이용해 Er/Al을 복합 첨가하여 광증폭 매질을 제작하는 연구를 수행하였다. 형광 측정을 통해 Al의 복합첨가에 의한 형광효율의 감소 방지 및 형광 스펙트럼의 반치폭 증가를 확인할 수 있었다. 즉, Al가 0.48wt%가 첨가된 경우, Er가 0.14wt% 첨가되는 경우에도 형광세기가 감소하지 않음을 확인하였으며, $1.5mu extrm{m}$ 대역의 형광스펙트럼의 대역폭이 약 5nm 정도 증가됨을 관찰하였다.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.58-67
• /
• 2002

In this study copper chloride(CuCl$_2$) solution was used as raw material to produce the fine copper oxide powder which has less than 1 $\mu\textrm{m}$ average particle size and has uniform particle size distribution by spray pyrolysis process. In the present study, the effects of reaction temperature, the injection speed of solution and air, the nozzle tip size and the concentration of raw material solution on the properties of produced powder were studied. The structure of the powder became much more compact with increasing the reaction temperature regardless of copper concentration of the raw material solution. The particle size of the powder increased accordingly with increasing the reaction temperature in case of 30 g/$\ell$ copper concentration of the solution. The particle size of the powder increased accordingly, and the surface structure of the powder became more porous with increasing the copper concentration of the raw material solution. When copper concentration in raw material solution was more than 100 g/$\ell$, all produced powder was CuCl regardless of reaction temperatures. When copper concentration in solution was below 30 g/$\ell$ and reaction temperature was higher than 90$0^{\circ}C$, CuO was the main phase. The surface of the powder tended to become porous with increasing the injection speed of solution. Particle size was increased and the surface of the powder showed severely disrupted state with increasing the nozzle tip size. The particle size was decreased and the particle size distribution was more uniform with increasing the air pressure through the nozzle.

• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.391-402
• /
• 1999

Characteristics of composite electrolytes which were prepared by coating a thin film of YSZ (yttria sta-bilized zirconia : (ZrO2)0.92 (Y2O3)0.08) on YDC (yttria doped ceria : Ce0.8Y0.2O1.9) with mixed conductivity have been investigated in order to develop the low-temperature solid oxide fuel cell. The thickness (t) of spin-coated YSZ thin films after the heat-treatment at 600$^{\circ}C$ was increased proportionally to the sol con-centrations (C) while the decrease in its thickness with the spin rate ($\omega$) could be expressed in the e-quation of ln t=9.49-0.53 ln $\omega$(0.99mol//s sol conc.) When the sol concentration and the spin rate being less than 0.99 mol/l and higher than 1000 rpm respectively reliable YSZ/YDC composite electrolytes could be obtained by multi-coating although several micro-cracks were observed in singly coated YSZ film surfaces. The dense YSZ film with a 1$\mu\textrm{m}$ thickness was prepared by coating of 0.99 mol/l YSZ sol five-times at 2000 rpm followed by heat-treatment at 1400$^{\circ}C$ for 2h, The adhesion between YSZ film and YDC substrate was found to be very good. The open circuit voltages of H2/O2 single cell with YSZ/YDC composite electrolytes were 0.79∼0.82 V at 800$^{\circ}C$ and 0.75∼0.77V at 900$^{\circ}C$ The open circuit voltage was inversely proportioned to the thickness ratio of YSZ thin film (1$\mu\textrm{m}$) to YDC substrate(0.28-2.22 mm)

• 한국미생물·생명공학회지
• /
• 제17권4호
• /
• pp.392-396
• /
• 1989

Facultative methylotroph인 Methylobacterium organophilum을 유일한 탄소원으로 메탄올을 0.5% (v/v) 함유한 최소 합성배지를 이용하여 pH 6.8과 3$0^{\circ}C$에서 배양하였다. 세포의 증식은 배지 내의 여러 성분들에 의해 영향을 받았으며 이로부터 최대증식속도를 얻을 수 있는 최적 합성배지 조성을 확립하였다. 배지조성 중 질소원이 결핍되면 세포의 증식이 감소하며 Fe$^{+2}$ 또는 Mn$^{+2}$ 이온의 결핍은 세포의 비증식속도를 감소시켰다. 탄소원인 메탄올은 농도를 증가시킬수록 세포의 비증식속도가 감소하는 메탄올의 기질 저해성을 확인하였으며, 4%(v/v) 이상의 메탄을 농도에서는 세포의 증식이 완전히 저해되었다. 이러한 메탄올의 기질 저해성은 간헐식 유가배양법을 이용하여 극복하고 PHB의 축적을 촉진하는 영양분 제한(nutrient-deficiency) 실험을 수행하였다. 합성배지의 영양분 중 NH$_{4}^{+}$, SO$_{4}^{-2}$, $K^+$ 또는 PO$_{4}^{-3}$ 이온을 결핍시켰을 때 M. organophilum의 PHB 생산이 증가하였으며 칼륨이온을 결핍시켰을때 세포의 건조 중량에 대한 PHB 함량은 최대 58%를 얻었다.