• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.

• Journal of Microbiology and Biotechnology
• /
• 제10권3호
• /
• pp.344-348
• /
• 2000

Abstract The removal percentage (94%) of 100 ppm of pyrene in a shaken culture of white rot fungus, Irpex lacteus, was much higher than that in a static culture (37.9%). Over 90% of the pyrene disappeared with I. lacteus grown at $15-27^{\circ}C$, yet less than 50% was removed at $37^{\circ}C$. The transformation rates of pyrene ($4.5-5.0{\;}\mu\textrm{g}/ml/day$) were not very different among cultures with 5- 30% inoculum sizes, and over 90% of the 100 ppm pyrene was removed in every case during 20 days of incubation. The biodegradation of pyrene by I. lacteus was confirmed by measuring the $CO_2$ evolved from the mineralization of the added pyrene. The activity of lignin peroxidase (LiP), which is known to be involved in the biodegradation by white rot fungi, was high between 8 to 12 days of incubation. Although manganese peroxidase activity was demonstrated during the same period as LiP, its activity was quite low, and no laccase activity was detected. Even though the activity patterns of ligninolytic enzymes did not coincide with the pyrene removal, this study shows that I. lacteus has a high biodegrading capability and can be a candidate for the bioremediation of polycyclic aromatic hydrocarbon contaminants.inants.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1057-1062
• /
• 2001

We investigated the change of mechanical properties for TiNi shape memory alloy by heat treatment. 6061Al matrix composites with TiNi shape memory alloy as reinforcement were fabricated by vacuum casting. TiNi alloy has the maximum tensile strength at 673K treated and there is no change of tensile strength and hardness at 448K treated. The composites, prepared by vacuum casting, showed good interface bonding by vacuum casting. It was about 3$\mu\textrm{m}$ of thickness of the diffusion layer. Tensile strength of the composite was in higher than that of 6061Al alloy as increased value of about 70MPa at room temperature and about 110MPa at 363K. We thought that the increase of the tensile strength at 363K was due to reverse transformation of the TiNi shape memory alloy.

• 한국환경성돌연변이발암원학회지
• /
• 제22권3호
• /
• pp.164-168
• /
• 2002

Phthalate analogues are a plasticizer and solvent used in industry and were reported to be a potential carcinogen classified in the category of suspected endocrine disruptors. Most common human exposure to these compounds may occur with contaminated food. They may migrate into food from plastic wrap or may enter food from general environmental contamination. Since these substances are not limited to the original products, and enter the environment, they have become widespread environmental pollutants, thus leading to a variety of phthalates that possibly threaten the public health. To determine whether seven phthalate analogues i.e. diallyl phthalate, diisodecyl phthalate, di-n-nonyl phthalate, butyl benzyl phthalate, di-n-octyl phthalate, di-tridecyl phthalate, and dibutyl phthalate, can induce DNA strand breakage that is one of the various factors related to the mechanism of carcinogenicity, the comet assay which has been widely used for the detection and measurement of DNA strand breaks, was conducted in L5178Y mouse lymphoma cells. From these results, seven phthalates revealed dose-dependent decrease of cell viability, however, no remarkable cytotoxicity was observed even at high concentration of 100 $\mu\textrm{g}$/$m\ell$ phthalates. And also, the results showed that the induction of DNA strand breaks by seven phthalates was not significantly different from the control in this study.

• 한국환경과학회지
• /
• 제10권6호
• /
• pp.387-391
• /
• 2001

The hydroxyapatite(HAp) as a carrier the for ion exchange agent of $Ag^+$ions was prepared in semiconductor fabrication, The Ca/P molar ratio of the HAp was 1.65. The HAp is molded in shape of the antimcrobial ball and then sintered at 100$0^{\circ}C$ Ag-containing HAp(HAp-Ag) was prepared by incorporating $Ag^+$/ions in HAp crystals through an ion-exchange reaction in solutions containing 0.01M $AgNO_3$. The antimicrobial effect of HAp-Ag for bacteria such as Escherichial coli and Staphylococcus aureus has been Investigated. The concentrations of silver in the antimicrobial ball was determined by inductively coupled plasma and the amount of $Ag^+$ions was 9.0$\mu\textrm{g}$/g. The HAp-Ag exhibited excellent antimicrobial effect for bacteria such as E. coli and S. aureus. The bactericidal activity was considered to be caused by direct contact of bacteria with $Ag^+$ions in the HAp crystals. The HAp would likely to be possible as a carrier of antimicrobial metal ions such as Ag, Cu, and Zn by recycling of waste sludge in the semiconductor fabrication process.

• 한국건축시공학회지
• /
• 제1권1호
• /
• pp.143-150
• /
• 2001

Permanent-Form is one of system forms for reducing human labor, work costs, oscillation, noise, construction wastes and so on. Permanent-Form is made from precast method in facilities, and carried in construction site to assemble with no demolding. The biggest expense to produce permanent-Form is about manufacturing mold. This papers about structural efficiency evaluation, construction efficiency test. The result of this study is below. (1) In the compressive strength test of column. Fly ash specimen and polymer specimen's strength developed as each 8%, 14% to comparison with standard specimen. The reason of this result from form section area increase and form's reinforcing bar (2) The Degree of column crack in permanent form is lower than another one's The glass fiber's fiber reinforcement effect brings like this. (3) In the flexural load test of beam, the early crack load and maximum load of permanent form use specimen showed 20% higher than standard specimen's. (4) In field application experiment, an constructional error is satisfied with the allowable margin of error, $\pm$5mm (5) When the concrete is placed into the form inside, The transformation degree of permanent form is lower than plywood form's. (6) The concrete packing ability of permanent form is satisfactory. (7) The bonding strength of permanent form shows enough strength - 6kgf/$\textrm{cm}^2$.

• Journal of Microbiology and Biotechnology
• /
• 제4권1호
• /
• pp.36-40
• /
• 1994

A water sample was taken from a black smoker chimney of a deep-sea hydrothermal vent by using an unmanned submersible "Dolphin 3K". The temperature of the hydrothermal fluid from the black smoker was $276^{\circ}C$. After isolation by repeated serial dilutions, An extremely thermophilic bacterial strain was selected. The strain designated as DT1331, was an anaerobic, non-motile, coccoid shaped bacterium with about 0.5 to $1.0\;\mu\textrm{m}$ in diameter. The strain DT1331 could grow up to $93^{\circ}C$, but the optimum temperature of this strain was $80^{\circ}C$. The growth occurred in the pH range of 4.5 to 8.5 and the optimum pH was 6.0. The strain DT1331 required 1% to 5% NaCl for growth and cell lysis was observed below 1% NaCl concentration. The bacterium could grow on polypeptides such as tryptone, peptone, soytone and on proteins such as casein or gelatin. However, no growth was observed on single amino acids, sugar and organic acids. Hydrogen gas was detected slightly during growth. This bacterium obligately required elemental sulfur and hydrogen sulfide gas was produced during growth.

• Journal of Microbiology and Biotechnology
• /
• 제13권4호
• /
• pp.628-631
• /
• 2003

The recombinant alanine dehydrogenase (ADH) from E. coli containing Thermus caldophilus ADH was purified to homogeneity from a cell-free extract. The enzyme was purified 38-fold with a yield of 68% from the starting cell-free extract. The purified enzyme gave a single band in polyacrylamide gel electrophoresis, and its molecular weight was estimated to be 45 kDa. The pH optimum was 8.0 for reductive amination of pyruvate and 12.0 for oxidative deamination of L-alanine. The enzyme was stable up to $70^{\circ}C$. The activity of the enzyme was inhibited by 1 mM $Zn^{2+}$, 20% hexane, and 20% $CHCl_3$. However, 10 mM $Mg^{2+}$ and 40% propanol had no effect on the enzyme activity. The Michaelis constants ($K_m$) for the substrates were $50\;\mu\textrm{M}$ for NADH, 0.2 mM for pyruvate, 39.4 mM for $NH_4+$, 2.6 mM for L-alanine, and 1.8 mM for $NAD^+$.

• Journal of Microbiology and Biotechnology
• /
• 제10권2호
• /
• pp.201-207
• /
• 2000

The freshwater green alga Chlorococcum sp. grew on NH_4^{+},{\;}NO_3^{-}$, urea, yeast extract, and peptone as the nitrogen source showing similar pattens of growth and secondary carotenoid (SC) production. However, the most suitable nitrogen source for the induction fo SC was urea. The dffects of nutrient levels (urea, phosphate, sulfate, ferrous iron, and salt) on growth and SC production were stydied by varying the concentration of each nutrient in batch cultures. High biomass production was achieved in cultures containing 20-28 mM urea, 4.8-10 mM phosphate, 1.6 mM sulfate, 70 mM phosphate, 1.6 mM sulfate, 170 mM NACl, and $50{\;}\mu\textrm{M}$ iron. The optimum concentrations of nutrients for biomass and for the SC accumulation in biomass were evaluated and the two media for achieving high biomass production and SC production were thus developed. The extent to which each parameter to stimulate the formation of SC in the alga were varied and the potentially improned SC prodution by manipulating the nutrient levels in the modified media were descussed.

• Transactions on Electrical and Electronic Materials
• /
• 제1권1호
• /
• pp.40-44
• /
• 2000

Metal-ferroelectric-insulator-semoiconductor field effect transistor (MFISFETs) were fabricated using CMOS processes. The Pt/SBT/NO combined layers were etched for forming a conformal gate by using Ti/Cr metal masks and a two step etching method, By the method, we were able to fabricate a small-sized gate with the dimension of $16/4{\mu}textrm{m}$ in the width/length of gate. It has been chosen the non-self aligned source and drain implantation process, We have deposited inter-layer dielectrics(ILD) by low pressure chemical vapor deposition(LPCVD) at $380^{circ}C$ after etching the gate structure and the threshold voltage of p-channel MFISFETs were about 1.0 and -2.1V, respectively. It was also observed that the current difference between the $I_{ON}$(on current) and $I_{OFF}$(off current) that is very important in sensing margin, is more that 100 times in $I_{D}-V_{G}$ hysteresis curve.