• 한국수정란이식학회지
• /
• 제16권2호
• /
• pp.79-89
• /
• 2001

배분화과정시 나타나는 $Ca^{2+}$ 변화에 미치는 $E_2$의 영향을 알아보고자 whole cell voltage clamp 기법, 방사선 등위원소 면역측정법, 그리고 공초점 현미경을 통하여 $E_2$처리 후 나타나는 $Ca^{2+}$ 전류 변화 및 세포내 $Ca^{2+}$ 농도 변화를 조사하였다. 생쥐의 미성숙 난자는 난소의 난포를 천자하고, 배란난자는 과배란 처리 후 난관에서 회수하였다. 수정란은 과배란 처리 후 수컷 생쥐와 교미를 유도한 후 각각의 단계에 맞는 수정란을 채란하였다. 혈중 $E_2$의 농도는 심장을 천자하여 혈액을 채취한 후 배발달 단계와 호르몬 처리 시간이 일치하는 혈액만을 사용하였다. 본 실험의 결과를 요약하면 다음과 같다. 1. $E_2$처리시 미성숙난자의 제 1극체 형성률 (성숙의 지표)은 $E_2$를 처리하지 않은 난자(83% : 83/100)보다 $E_2$를 처리한 난자 (94%, 94/100)에서 유의적 (P<0.05)으로 높게 나타났다. 2. $E_2$를 처리하였을 때 $Ca^{2+}$ 내향전류의 변화는 -10 mV에서 -1.23$\pm$0.01 nA (n=15)에서 -1.50$\pm$0.03 nA (n=15)로 122% 상승함으로써 유의한 (P<0.05) 변화를 보였다. 3. $E_2$를 처리하지 않은 난자 및 수정란을 1로 한 후 $E_2$를 처리한 난자 및 수정란의 변화를 상대적인 값으로 표시하였다. $E_2$처리한 난자는 1.22$\pm$0.17 (n=10), $E_2$처리한 전핵배는 1.20$\pm$0.14 (n=10), $E_2$처리한 2세포기배는 1.07$\pm$0.01 (n=10), 4세포기배는 1.05$\pm$0.09 (n=10)를 나타냄으로써 수정란의 단계마다 $E_2$의 반응 결과가 차이가 남을 알 수 있었다. 4. $E_2$농도 곡선에서 PMSG 처리 후 $E_2$의 혈중농도는 계속적인 상승을 보이다가 배란시기에 최고치를 나타내었으며, 배란 후 다시 감소하여 8세포기에서는 급격한 감소현상이 나타났다. 이후 다시 상실기를 거쳐 배반포기 임신기간동안 $E_2$의 농도가 상승하였다. 5. $E_2$처리 후 세포내 $Ca^{2+}$ 농도변화의 결과로, $E_2$를 처리하지 않은 난자들의 세포내 $Ca^{2+}$ 농도는 836.4$\pm$131.2 (n=10), $E_2$를 처리한 난자들은 1736.4$\pm$192.0 (n=10)로써 유의한 (P<0.05) 차이를 보였다. 이상의 결과로부터 $E_2$처리에 의한 세포내 $Ca^{2+}$ 농도 상승은 $E_2$가 $Ca^{2+}$ 통로를 자극함으로써 세포바깥의 $Ca^{2+}$이 세포안으로 이동하여 나타나는 변화로 생각된다.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.5-8
• /
• 2003

We studied the effect of spin injection on tunneling conduction properties of intrinsic Josephson junctions formed in $Bi_2$$Sr_2$$CaCu_2$$O_{ 8＋x}$ single crystals. properties of an identical stack (10${\times}$5.0${\times}$0.030 $\mu\textrm{m}^3$) of intrinsic Josephson junctions were compared for the bias current injected through Au and Co electrodes. The suppression of the superconducting gap in the $_2$ double layers and the interlayer Josephson critical current was manifested in the tunneling current-voltage characteristics of the stacks. This effect appears to be caused by the pair breaking associated with spin-polarized carriers injected from the Co electrode into the $Bi_2$$Sr_2$$_2$O$CaCu_{ 8＋x}$ single crystal. This study may provide valuable information on clarifying the mechanism of high- $T_{c}$ superconductivity.y.y.

• Journal of Ginseng Research
• /
• 제24권4호
• /
• pp.168-175
• /
• 2000

Xenopus oocytes를 이용하여 인삼의 유효 성분으로 알려진 Ginseng total saponin(GTS)의 신호 전달 기작을 two electrode voltage clamp 방법을 이용하여 연구하였다. GTS는 세포 바깥에 처리했을 때 -2OmV보다 더 positive한 voltage에서 커다란 outward current를 유도하였다. 그러나, 세포 안쪽에 GTS를 injection할 경우 아무런 효과가 없는 것으로 나타났다. GTS처리에 의한 outward current유발 효과는 GTS 투여 용량에 의존적인 것으로 나타났다(EC$_{50}$ : 4.4 $\mu\textrm{g}$/ml). GTS의 작용은 $Ca^{2+}$-activated Cl- channel blocker인 niflumic acid에 의하여 차단되었다. 칼슘 chelator인 BAPIA와 IP$_3$ 수용체 길항제인 heparin을 세포내 injection에 의하여 차단되었다. 또한 active phospholipase C inhibitor(PLC)인U-73122를 세포 바깥에 전처리할 경우에도 GTS의 작용이 부분적으로 억제되는 것으로 나타났다. 백일해 독소를 전처리할 경우GTS의 작용은 억제되지 않은 것으로 나타났으나, GTP analog인 GTP${\gamma}$S를 세포내 injection할 경우 GTS의 작용은 억제되는 것으로 나타났다. 이러한 연구 결과는 GTS가 oocytes세포막 성분과 상호 작용에 의하여 $Ca^{2+}$-activated Cl- channel이 열리도록 하고, 이 과정에 PLC활성 및 백일해 독소에 민감하지 않은 G단백질활성 및 IP3에 민감한 세포내 $Ca^{2+}$-activated로부터 칼슘 방출을 유도하는 것으로 나타났다났다

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1083-1091
• /
• 1997

반응성이 좋은 미분말의 고온 초전도상을 얻고자 액상 합성법 중의 하나인 옥살산염법을 이용하였다. 본 방법을 사용하여 합성 분체의 초기 형상과 입도를 제어하였고, 개선된 균일성을 가진 Bi(Pb)-Sr-Ca-Cu-O 초전도 분말을 제조할 수 있었다. 합성된 산화물 초전도체 분말의 특성 및 pellct으로 성형후 열처리한 시편의 미세구조와 전기적특성을 조사하였다. 또한, Tape casting법에 의해 후막을 제작하여 미세구조와 전기적 특성을 관찰하였다. 합성된 분말의 입자 크기는 100~300nm 이하의 구형이었으나 대부분이 1~3 ${\mu}{\textrm}{m}$ 크기로 응집되어 있었다. 84$0^{\circ}C$로 72시간 동안 열처리한 괴상 시편의 임계저항온도는 110K였으며, 열처리한 후막의 임계전류는 각각 0.6A, 1.9A였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 1996

Superconducting current lead is one of the promising applications of the oxide high-Tc superconductors, because they have the advantage of decreasing heat conduction to low temperature region, comparing with a conventional cooper alloy lead. High critical current density is a key factor for the applications such as current lead. (Bi,Pb)$_2$Sr$_2$Ca$_2$Cu$_3$O$\_$x/ high Tc superconductor haute been investigated in terms of critical current density. Bi-2223 superconducting current lead made by CIP and solid state sintering process. Bi-2223 current lead that heat treated at 836$^{\circ}C$ for 240 h in 1/13 P$\_$O$_2$/ had over 150 A/$\textrm{cm}^2$ of critical current density at 77K. We knew that the superconducting properties of tube type current leads were better than rods type of them. And we investigated the relation of Bi-2223 formation and heat treatment condition by XRD and SEM analysis.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1035-1040
• /
• 2003

High $T_{c}$ superconducting B $i_2$S $r_2$CaC $u_2$ $O_{8+d}$ (BSCCO2212) films were prepared by a metallorganic decomposition (MOD) method. The metal organic solution of BSCCO2212 was spin-coated on MgO (100) substrates at 3000 rpm for 1 min. To achieve a high critical current density, we controlled heat-treatment conditions and atmosphere. The films were annealed at temperature 75$0^{\circ}C$ ∼ 80$0^{\circ}C$ in $O_2$ or air. We obtained c-axis orientated BSCCO thin films on MgO substrates. The annealed sample at 77$0^{\circ}C$ with $O_2$ showed the critical temperature about 77 K and critical current denstity of 1.19 ${\times}$ 10$^{5}$ A/$\textrm{cm}^2$ about 13 K.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.491-495
• /
• 1999

In this study, we focus on Ca contaminant which affects on the roughness Si substrate after thermal process. The initial Si substrates were contaminated intentionally by using a standard Ca solution. The contamination levels of Ca impurity were measured by TXRF and the chemical composition of that was analyzed by AES. Then we gre the thermal oxide to investigate the effect of Ca contaminants. The microroughness of the Si surface, the thermal oxide surface, and the surface after removing the thermal oxide were measured to examine the electrical characteristics. The initial substrates that were contaminated with the standard solution of Ca exhibited the contamination levels of 10\ulcorner~10\ulcorneratoms/$\textrm{cm}^2$ which was measured by TXRF. The Ca contaminants were detected by AES and exhibited the peaks of Ca, SI, C and O.After intentional contamination, the surface microroughness of this initial substrate was increased from $1.5\AA$ to 4$\AA$ as contamination levels became higher. The microroughness of the thermal oxide surfaces of both contaminated and bare Si substrates exhibits similar values. But the microroughness of the contaminated$ Si/SiO_2$ interface was increased as contamination increased. The thermal oxide of contaminated substrate exhibited the small minority carrier diffusion length, low breakdown voltage, and slightly high leakage current.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.481-487
• /
• 2003

Polypyrrole (PPy) was coated sequentially by chemical and electrochemical methods on a woven fabric, giving rise to a fabric having high electrical conductivity. We investigated the effects of the preparation conditions on the various properties of the resulting fabric. The PPy-coated fabric with optimum properties was obtained when it was prepared sequentially by chemical polymerization at the elevated temperature of 100$^{\circ}C$ under a pressure of 0.9 kgf/$\textrm{cm}^2$ and then electrochemical polymerization with a 3.06 mA/$\textrm{cm}^2$ current density at 25 $^{\circ}C$ for 2 hrs with the separator plate. The surface resistivity of the resulting fabric was as low as 5 Ω/$\square$ .The PPy-coated fabric prepared under the optimum conditions showed practically applicable heat generating property. When electrical power was supplied to the fabric using a commercial battery for a mobile phone (3.6 V, LGLl-AHM), the temperature of the fabric increased very quickly from room temperature to ca. 55 $^{\circ}C$ within 2 min and was maintained for ca. 80 min at that temperature. The heat generating property of the fabric was extremely stable, exhibiting similar behavior over 10 repeated cycles. Therefore, we suggest that the PPy-coated fabric in this study may be practically useful for many applications, including flexible, portable surface-heating elements for medical or other applications.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.41-45
• /
• 2004

Polycrystalline Tl-1223 superconductors with a chemical composition of (Tl, Pb, Bi)TEX>$ (Sr, Ba)<_2$$Ca_2$$Cu_3$$O_{x}$ were synthesized by the solid state reaction method. The optimum chemical composition was $Tl_{0.8}$ $Pb_{0.2}$ $Bi_{0.2}$ $Sr_{1.8}$ $Ba_{0.2}$ $Ca_{2.2}$ $Cu_3$$O_{x}$ And the optimum sintering temperature and time were $905^{\circ}C$ and 7.5h, respectively. The sample was evaluated for their superconducting properties by magnetization measurement. The critical temperature $T_{c}$ is 120 K and the critical current density $J_{c}$ (T=5K, 0T) is estimated to be ∼ $10^{5}$ A/$\textrm{cm}^2$ for $Tl_{0.8}$ $Pb_{0.2}$ $Bi_{0.2}$ $Sr_{1.8}$ $Ba_{0.2}$ $Ca_{2.2}$$Cu_3$$O_{x}$ .

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1123-1132
• /
• 1994

Bi-Sr-Ca-Cu-O superconductor thin films were prepared on MgO and LaAlO3 substrates by MOCVD technique. The films deposited on MgO and LaAlO3 substrates became superconducting at 64 K and 70 K respectively. The measured critical current density of thin film deposited on LaAlO3 substrate was around 104 A/$\textrm{cm}^2$. After annealing at $700^{\circ}C$ for 3 hours, the critical transition temperature(Tc) of films deposited on LaAlO3 was changed from 70 K to 74 K.