• 항공우주기술
• /
• 제4권2호
• /
• pp.153-162
• /
• 2005

초기 설계과정에서 4가지 1.4MW급 터보펌프용 터빈설계안을 도출한 후 각각의 설계안에 대하여 프로즌 로터기법을 적용한 3차원 유동해석을 수행하였다. 이 결과를 통하여 각각의 설계안간의 성능을 비교하고 가장 성능이 우수한 설계안을 선정하였다. 계산결과의 분석을 통하여 유로에서의 유동특성과 충격파와 후류에 의해 발생되는 손실을 파악하였으며 이 분석 결과를 바탕으로 보다 우수한 성능을 보일 것으로 예측되는 설계안을 도출한 후 이에 대한 3차원 유동해석을 수행하여 결과를 분석하였다.

• 호남수학학술지
• /
• 제42권2호
• /
• pp.251-268
• /
• 2020

In this paper, we estimate the degree of approximation by means of the complete modulus of continuity, the partial modulus of continuity, the Lipschitz-type class and Petree's K-functional for the bivariate Szász-Kantorovich operators based on Brenke-type polynomials. Later, we construct Generalized Boolean Sum operators associated with combinations of the Szász-Kantorovich operators based on Brenke-type polynomials. In addition, we obtain the rate of convergence for the GBS operators with the help of the mixed modulus of continuity and the Lipschitz class of the Bögel continuous functions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.165-168
• /
• 1996

In this paper, we propose a design method of PID adaptive controller based on frequency domain analysis. The method is based on the estimation of a nonparametric process model in the frequency domain and the determination of the PID controller parameters by achieving partial model matching so as to minimize a performance function concerning to relative model error between the loop transfer function of the control system and the desired system. In the design method the process is represented only by a discrete set of points on the Nyquist curve of the process. Therefore it is not necessary to estimate a full order parameterized process model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.110-115
• /
• 2004

The hybrid fault diagnosis method based on a combination of the signed digraph (SDG) and the partial least-squares (PLS) has the advantage of improving the diagnosis resolution, accuracy and reliability, compared to those of previous qualitative methods, and of enhancing the ability to diagnose multiple fault. In this study, the method is applied for the multiple fault diagnosis of the Tennessee Eastman challenge process, which is a realistic industrial process for evaluating process contol and monitoring methods. The process is decomposed using the local qualitative relationships of each measured variable. Dynamic PLS (DPLS) model is built to estimate each measured variable, which is then compared with the estimated value in order to diagnose the fault. Through case studies of 15 single faults and 44 double faults, the proposed method demonstrated a good diagnosis capability compared with previous statistical methods.

• Tribology and Lubricants
• /
• 제21권6호
• /
• pp.289-295
• /
• 2005

Most machine element, such as gears and bearings, are operated in the mixed lubrication region. Contact between two asperities has an effect on machine life by increasing local pressure. To estimate fatigue life exactly, asperity contact should be considered as a factor of fatigue life because this happening produce friction, abrasion and make flash temperature. In this paper, asperity contact is considered as a result of film breakdown when lubricant pressure is not enough to separate two asperities. Contact pressure is calculated to asperity overlap region and added to lubricant pressure. For this model, numerical procedure is introduced and the result on surface roughness and velocity for wheel bearing is presented. Results of EHL analysis for wheel bearing show that asperity contact is occurred at the edge ofEHL conjunction where has a insufficient lubricant pressure to separate two surface.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.890-894
• /
• 2011

In this thesis, the silicone filler with a sample size of 0~75 phr and void size of 2~4.5 mm is prepared in order to diagnose the defect of void which exists in widely used insulation material, silicone rubber. In this silicone rubber sample, electrodes are connected and whilst the voltage changes, applied voltage 7 kV~9 kV is increased constantly over time and discharge quantity, discharge frequency and applied voltage (T-QNV) were measured. The discharge quantity of the applied voltage (VQ) is measured to estimate inception voltage and extinction voltage. In addition, under the condition of maintaining constant applied voltage, discharge quantity and discharge frequency (QN) are measured, and its characteristics are analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.98.3-98
• /
• 2001

The research for detecting of insulating deterioration in transformer has been studied from long ago. Analysis method of combustible gas, which is included in insulating oil, has been widely used in detection of transformer pre-fault detection due to the effectiveness of its method. Recently the fault effect of the large transformer is very critical in a power system, therefore the on-line monitoring and diagnostic system is needed. In addition, the more accurate method of detecting a Partial Discharge (PD) location should be developed. For preventive maintenance against discharge failures, it is important not only to detect the discharges, but also to accurately estimate their positions. However ...

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권4호
• /
• pp.365-368
• /
• 1995

Lactation curves of dairy cows were generated using three models, namely; incomplete gamma function (model 1), polynomial inverse function (model 2) and non-linear regression (model 3). Secondary milk yield data of 27 cows which had completed 6 lactations were used in this study. Milk yield records (once a week) throughout the lactation and from the first three months of lactation were fitted to the models. Estimation of total milk yield by model 3 using the data once a week throughout the lactation resulted in smaller % bias and standard error than those generated from model 1 and 2. But, model 2 was more accurate in predicting the 305-day milk yield equivalent closer to actual yields with smaller bias % and error using partial records up to 3 months. Also, model 2 was able to estimate the time to reach peak yield close to the actual data using partial records and model 2 could be used as a tool to advise farmers on appropriate feeding and management practices to be adopted.

• Communications for Statistical Applications and Methods
• /
• 제9권2호
• /
• pp.533-542
• /
• 2002

In this paper, a covariate adjusted logrank test is considered for censored paired data under the Cox proportional hazard model. The proposed score test resembles the adjusted logrank test of Tsiatis, Rosner and Tritchler (1985), which is derived from the partial likelihood. The dependence structure for paired data is accommodated into the test statistic by using' sum of square type' variance estimators. Several weight functions are also considered, which produce a class of covariate adjusted weighted logrank tests. Asymptotic normality of the proposed test is established and simulation studies with moderate sample size show the proposed test works well, particularly when there are dependence structure between treatment and covariates.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권2호
• /
• pp.149-163
• /
• 2001

We study the normality of the maximum partial likelihood estimators for the proportional hazard model with informative censored data. The proposed models cover the cases in which the times to a primary event may be informatively or randomly censored and the times to a secondary event may be randomly censored. To estimate the parameters and to check the normality of the parameters in the model, we adopt the partial likelihood and counting process to use the martingale central limit theorem. Simulation studies are performed to examine the normality of the MPLE's for the five cases in which they depend upon the proportions of randomly censored and informative censored data.