• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.389-393
• /
• 2000

High-quality $Er^{3+}$ doped Mg : $LiNbO_3$single crystal fibers were grown by a micro-pulling down ($\mu$-PD) method. Single crystal fibers were pulled down through the nozzle, at a pulling down rate of 0.5 mm/min and using a Pt crucible with a nozzle 1 mm in diameter in air atmosphere. Defects such as bubbles, cracks and inclusions were not detected in any of the grown crystals. The optical transmission of Er : Mg : $LiNbO_3$crystal was measured and the energy levels of $Er_2O_3$ ion could be calculated. The photoluminescence spectrum of crystal fibers showed an energy band emission with the strongest line corresponding to the $^4I_{3/2}{\to}^4I_{15/2}$transition. The concentration dependence of the entire wavelength region emission intensity upon excitation intensity measured emission intensity for the 3 mol% MgO doped fibers was larger than that for the 1, 5 mol% MgO doped fibers.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.75-80
• /
• 2010

Electroless nickel plating on porous carbon substrate was investigated. The pore sizes of carbon substrates were 16-20 ${\mu}m$ and over 20 ${\mu}m$. The carbon surface was changed from hydrophobic to hydrophilic after immersing the substrate in an ammonia solution for 40 min at $60^{\circ}C$. The contact angle of water was decreased from $85^{\circ}$ to less than $20^{\circ}$ after ammonia pretreatment. The content of phosphorous in nickel deposit was decreased with increasing pH and then deposits became crystallized. The thickness of nickel deposit was increased with increasing pH. The minimum concentration of $PdCl_2$ for the electroless nickel plating was 5 ppm and the thickness of nickel was not significantly affected by the concentration of $PdCl_2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.873-876
• /
• 2000

Characteristics of piezoelectric thick films prepared by screen printing method were investigated. The piezoelectric thick films were printed using Pb(Mg,Nb)O$_3$-Pb(Zr,Ti)O$_3$system. The lower electrodes were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited with Pt by sputtering on Ag-Pd. The ceramic paste was prepared by mixing powder and binder with various ratios using three roll miller. The fabricated thick films were burned out at 650$^{\circ}C$ and sintered at 950$^{\circ}C$ in the O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20 $\mu\textrm{m}$ and the Ag-Pd electrode acted as a diffusion barrier above 3 $\mu\textrm{m}$ thickness. When the lower electrode Ag-Pd was 6 $\mu\textrm{m}$ and the piezoelectric thick films were sintered by 2nd step (650$^{\circ}C$/20min and 950$^{\circ}C$/1h) using paste mixed Pb(Mg,Nb)O$_3$-Pb(Zr,Ti)O$_3$$.$ MnO$_2$+ Bi$_2$O$_3$. V$_2$O$\_$5/ and binder in the ratio of 70:30, the remnant polarization of thick film was 9.1 ${\mu}$C /cm$^2$.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.297.2-297.2
• /
• 2002

Previous report showed that histamine release by HCI was mediated via reactive oxygen species (ROS) generation in RBL 2H3 cells. To investigate action of protein kinase on histamine release and ROS generation. we observed effects of protein kinase inhibitors on histamine release and ROS generation in RBL 2H3 cells stimulated by HCI HCI dose-dependently increased both histamine release and ROS generation. HCI-induced histamine release was significantly inhibited by bisindolmaleimide (10 ${\mu}$M). DHC (10 ${\mu}$M). , and wortmannin (10 ${\mu}$M), but not by PD098059 (10 ${\mu}$M). ON the other hand. HCI-induced ROS generation was significantly inhibited by DHC (10 ${\mu}$M). but not by bisindolmaleimide(10 ${\mu}$M). wortmannin (10 ${\mu}$M). and PD098059 (10 ${\mu}$M). However KN-62 did not inhibited both. These results showed that involvement of protein kinase in regulation of histamine release and ROS generation may be different and only tyrosine kinase may be associated with regulation of both histamine release and ROS generation in RBL 2H3 cells.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.160-165
• /
• 2006

A Pd-Cu-Ni alloyed hydrogen membrane has fabricated on porous nickel support formed by nickel powder. Porous nickel support made by sintering shows a strong resistance to hydrogen embrittlement and thermal fatigue. Plasma surface modification treatment is introduced as pre-treatment process instead of conventional HCl wet activation. Nickel was electroplated to a thickness of $2{\mu}m$ in order in to fill micropores at the nickel support surface. Palladium and copper were deposited at thicknesses of $4{\mu}m$ and $0.5{\mu}m$, respectively, on the nickel coated support by DC sputtering process. Subsequently, copper reflow at $700^{\circ}C$ was performed for an hour in $H_2$ ambient. And, as a result PdCu-Ni composite membrane has a pinhole-free and extremely dense microstructure, having a good adhesion to the porous nickel support and infinite hydrogen selectivity in $H_2/N_2$ mixtures.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.04a
• /
• pp.74-75
• /
• 2002

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.285-289
• /
• 2001

We investigated that each site was substituted by new chemical components in Langasite ($La_3Ga_5/SiO_{14}$)-type structure with superior piezoelectric characteristics than $La_3Ga_5/SiO_{14}$. In this study $Ca_3TaGa_5Si_{2}O_{14}$ was synthesized by soilid-state reaction and grown by the $\mu$-PD(micro-pilling-down)and Cz technique. Lattice parameter and chemical composition was investigated by XRD and EPMA respectively.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.33-44
• /
• 2011

The inorganic powder EL lamp was made by screen printing technique with a phosphor ink and a dielectric ink. The thickness of a phosphor ink layer and a dielectric ink layer is $35{\mu}m$ and $54{\mu}m$ respectively. A increasing ratio of the luminance of inorganic powder EL lamp to be a 1P1PD-phosphor ink layer in which increased voltage at constant frequency is higher 12% than when increased frequency at constant voltage. It is higher 57% than when increased frequency at constant voltage that the rate of increase of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer in which increased voltage at constant frequency. Finally, when increased voltage at constant frequency, a increasing ratio of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer is higher about 40% than that to be a 1P1PD-phosphor ink layer.

• Journal of Ginseng Research
• /
• v.17 no.2
• /
• pp.131-134
• /
• 1993

Panaxadiol (PD) from Korean red ginseng C.A. Meyer did not control the concentration of cytosolic free $Ca^{2+}$ influxes by thrombin (5 $\mu$/ml). However, PD strongly inhibited the synthesis of thromboxane. $A_2$ (TX$A_2$) in the aggregation of human platelets induced by thrombin (5 $\mu$/ml). These rexults suggest that PD blocks the any Pathway transforming to TX$A_2$ from arachidonic acid (AA) which release out of plasma membrane phospholipids by $Ca^{2+}$-dependent phospholipase C or phospholipase $A_2$. It may be also concluded that PD has the antiplatelet function by inhibiting the synthesis of TX$A_2$, which known to be the potent stimulator of the aggregation of human platelet.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.124-129
• /
• 1996

TiN 기판상에 CVD와 무전해 도금을 이용하여 구리막을 성장시킬 때 여러 가지 전처리에 따른 증착 양상의 변화에 관하여 조사하였다. Cu(hfac)2를 선재(precursor)로 사용하여 CVD 증착을 실시할 때 각 전처리에 따른 TiN상의 구리막의 덮힘성(coverage)향상은 Pd-HF 활성화 처리>>HF dip> RF remote plasma의 순이었다. 특히 Pd-HF 활성화 처리를 해줄 경우 거의 완전한 연속막을 얻을수 있었으며 scotch tape peel test 결과 매우 양호한 부착특성을 보였으나, 이에 비해 전처리를 해주지 않은 경우에는 오랜 시간이 경과되어도 연속막으로 성장하지 못하고 섬모양의 큰 결정립을 이룰 뿐이었다. 이러한 차이는 Pd-HF 활성화 처리에 의해 표면에 미세하게 형성된 Pd층이 구리의 핵생성과 부착특성을 크게 향상시켰기 때문인 것으로 사료되며 이러한 효과는 무전해 도금의 경우에도 마찬가지였다. 그리고 기판과 증착온도에 따른 선택성을 보면 35$0^{\circ}C$이하에서는 pd-HF 활성화 처리에 의해서 SiO2에 대하여 TiN으로의 선택성을 가지나 그 이상의 온도에서는 선택성이 상실되었다.