• 한국재료학회지
• /
• 제2권6호
• /
• pp.389-397
• /
• 1992

Li의 양과 Al의 양을 달리한 $\alpha$(HCP) 단상 및 $\alpha$(HCP)+${\beta}$ (BCC) 2상 조직인 Mg-Li-Al합금을 시료로 하여 이 합금의 가공성과 시효경화륵성을 조사한 결과 $\alpha$단상보다는 $\alpha$+${\beta}$ 2상 조이,$\alpha$+${\beta}$ 2상조직에서는 Al양이 많을수록 가궁성이 증가하였으며 Mg-8.08Li-4.26Al의 경우 가공한계값은 62%였다. 이와같이 가공성이 증가한 이유는 basal plane뿐만 아니라 pyramidal plane과 prism plane에서도 슬립이 일어났기 때문이다. $\alpha$단상의 경우 MgL$i_2$ Al(${\theta}$)의 석출이 일어나지 않았으나 $\alpha$+${\beta}$ 2상 조직의 곁우 ${\beta}$상 내에서 ${\theta}$의 석출에 의한 피크경도같이 나타났으며, 2상 조직의 경우 경도값은 Al양이 많을수록 증가하였는데 이것은 Al양의 증가에 따른 Al Partition에 의한$\alpha$ 상의 강화와 ${\beta}$상에서의 석출물 증가에 의한 것으로 생각된다.

• 대한금속재료학회지
• /
• 제46권8호
• /
• pp.482-488
• /
• 2008

For a better understanding of the correlation between a corrosion and a microstructure, it is necessary to study a phase transformation with an annealing condition for Zr-Nb alloy. Zr-5wt.%Nb alloy with different phase characteristics was prepared with various annealing conditions. A microstructural study and corrosion test were performed to investigate the effect of a phase such as the phase type, fraction, and size on corrosion. The corrosion behavior of the Zr-5Nb alloy was very sensitive to the annealing condition, which affected the formation of the ${\beta}$-phases (${\beta}$-Nb or ${\beta}$. The corrosion rate of the Zr-5Nb alloy annealed at $500^{\circ}C$ with the formation of the ${\beta}$-Nb phase was lower than that of the Zr-5Nb alloy annealed from 600 to $800^{\circ}C$ with the formation of the ${\beta}$-Zr phase. The highest corrosion rate was observed for the ${\beta}$-quenched Zr-5Nb alloy. After a consideration of the corrosion rate and micro structure of the Zr-5Nb alloy, the corrosion resistance of that alloy was improved due to the formation of a small sized ${\beta}$-Nb phase which could be controlled by the annealing condition.

• 한국주조공학회지
• /
• 제18권5호
• /
• pp.431-438
• /
• 1998

Microstructure of A356 aluminum alloys cast in the permanent mold was investigated by optical microscope and image analyzer, with particular respect to the shape and size distribution of iron intermetallics known as ${\beta}-phase$ ($Al_5FeSi$). Morphologies of the ${\beta}-phase$ was found to change gradually with the Be:Fe ratio like these. In Be-free alloys, ${\beta}-phase$ with needlelike morphology was well developed, but script phase was appeared when the Be:Fe ratio is above 0.2:1. With the Be:Fe ratios of 0.4:1-1:1, script phase as well as Be-rich phase was also observed. In case of higher Be addition, above 1:1, Be-rich phase was observed on all regions of the specimens, and increasing of the Be:Fe ratios gradually make the Be-rich phase coarse. It was also observed that the ${\beta}-phase$ with needlelike morphology was coarsened with increase of the Fe content in Be-free alloys. However, in Be-added alloys, length and number of these ${\beta}-phases$ were considerably decreased with the increased Be:Fe ratio. Beryllium addition improved tensile properties and impact toughness of the A356 aluminium alloy, due to the formation of a script phase or a Be-rich phase instead of a needlelike ${\beta}-phase$. The DSC tests indicated that the presence of Be could increase the amount of Mg which is available for $Mg_2Si$ precipitate hardening, and enhance the precipitation kinetics by lowering the ternary eutectic temperature.

• Bulletin of the Korean Chemical Society
• /
• 제11권4호
• /
• pp.297-302
• /
• 1990

Retention of mono-substituted phenols in reversed-phase liquid chromatography has been studied based on the linear solvation energy relationships using the solvatochromic mobile phase parameters, ${\pi}_m^{\ast}, {\alpha}_m$ and ${\beta}_m$. It has been observed that retention behavior of phenols in RPLC were well represented by regression equations vs. solvatochromic mobile phase parameters even though the equations may be incomplete due to lack of an explicit cavity term. Dependence of retention of monosubstituted phenols on the mobile phase properties were varied depending on the type of the organic cosolvent in the mobile phase, e.g., ${\beta}_m$ and {\alpha}_m$ in methanol-water system, but ${\pi}_m^{\ast} and ${\beta}_m$ in THF-water system. It has been suggested that retention of phenols in methanol-water system is controlled by the solvophobicity of the mobile phase.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.502-508
• /
• 1988

The $\alpha$ to $\beta$ phase transformation of $\alpha$-Si3N4 whisker and related microstructural changes have been investigated. When only $\alpha$-Si3N4 whisker was heat treated in the range 1650~175$0^{\circ}C$, the $\alpha$ to $\beta$ phase transformation occured. In this case, it eas suggested that the oxygen content in $\alpha$-Si3N4 whisker affected the transformation behavior. Although $\alpha$-Si3N4 whisker with Si was heat treated under the same condition, however, the variation of $\beta$- fraction had a similar tendency with heat treating time. Therfore, it was considered that the oxygen content in $\alpha$-Si3N4 whisker affected the transformation behavior dominently rather than the content of added Si. The added $\beta$ phase did not affect the transformation behaviro of $\alpha$-Si3N4 whisker.

• Preventive Nutrition and Food Science
• /
• 제9권2호
• /
• pp.161-166
• /
• 2004

The effects of kimchis intake on Helicobacter pylori infection in the stomach, the counts of lactic acid bacteria in the large intestine, and bacterial enzymes ($\beta$-glucosidase, $\beta$-glucuronidase) and pH in feces were examined. A total of 20 participants (age range 34 ∼ 57) were assessed for H. pylori infection status by Be urea breath test. Fourteen participants were eliminated because they were H. pylori-negative. This study consisted of 4 consecutive phase, each of which lasted 4 weeks. Three hundred grams of kimchi were administered to H. pylori-infected subjects during the kimchi phase, followed by 4 weeks of control phase. During the control phase, subjects consumed 60 g of kimchi, the minimum amount in their customary diets. All participants were found to be H. pylori-positive during all experimental periods. During the kimchi phase, delta over baseline (DOB) level was lower than during the control phase, although significant difference between the kimchi and control phases were not found (p=0.9439). However, the counts of Lactobacillus sp. and Leuconostoc sp. significantly (p < 0.0005) increased during the kimchi phase. $\beta$-Glucosidase and $\beta$-glucuronidase activities and pH were significantly decreased by kimchi intake compared to control (p=0.000l). These results suggested that kimchi consumption did not show any therapeutic effect on H. pylori in the stomach. However, kimchi seemed to be a good food for colon health, since it increased the beneficial bacteria such as lactobacillus and decreased toxic enzyme ($\beta$-glucosidase and $\beta$-glucuronidase) activity and pH.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.254-254
• /
• 2010

Cu-Pc(copper(II)-phthalocyanine)는 박막의 형성과정에서 열처리 방식과 온도에 따라 박막의 구조가 변하며, 구조로는 열적으로 준 안정적인 $\alpha$-phase와 열적으로 안정적인 $\beta$-phase가 있다. 본 연구에서는 Cu-Pc 박막의 열적으로 안정적인 $\beta$-phase 구조에 대해 온도 조건 변화에 따른 표면 결정 성장의 특성을 연구하고자 한다. 진공증착 방법 중 하나인 thermal evaporation deposition을 이용하여 glass 기판위에 전열 처리 및 후열 처리에 대해 온도 조건 변화에 따른 $\beta$-phase type의 표면 결정 특성을 연구하였다. Cu-Pc 박막의 성장두께는 50nm 일정한 두께로 fluxmeter 및 thickness monitor를 이용하여 제어하였다. 50nm의 두께에 따른 기판온도를 $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$로 전열 처리한 후 각각 전열 처리한 기판온도에 대해 1hour, 2hour, 3hour 후열 처리하여 온도 조건에 따른 박막을 성장한 후, $\beta$-phase type에 대한 결정 구조 및 표면 특성 변화를 분석하였다. 제작된 Cu-Pc의 박막은 $\beta$-phase type으로, 열처리에 따른 $\beta$-phase transition 현상을 연구하였다. XRD(X-ray diffraction)를 통하여 박막에 대한 결정 구조 분석 및 FE-SEM(field emission scanning electron microscopy)을 이용하여 Cu-Pc 박막의 구조적 결정성과 방향성 등, 표면 상태와 형상구조에 대해 표면의 특성을 분석하며, 광 흡수도(UV-visible absorption spectra)을 이용하여 온도 조건에 따른 투과/흡수 현상을 비교분석하였다.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.9-16
• /
• 1987

Physical and electrical properties of ${\beta}$-Al2O3 were investigated as function of Na2O content from 6.67 wt.% to 13.19 wt.%. The majority phase is ${\beta}$-Al2O3 and the small amount of ${\beta}$"-Al2O3 exists in the specimens sintered at 1600$^{\circ}$for 30 mins. In the case of specimens with 8.54 wt.% Na2O sintered at 1600$^{\circ}C$, the relative amount of ${\beta}$-Al2O3 phase increases and that of ${\beta}$"-Al2O3 phase decreases with increasing sintering time, and then ${\beta}$"-Al2O3 phase does not exist if sintering time is over 8 hrs. As the Na2O content is increased, the 3-Point MOR and the resistivity are decreased. However, density and 3-Point MOR with increasing sintering time are decreased due to increasing the enclosed pore trapped inside of the exaggerated grains. As the sintering time is increased, the average grain size and the duplexity of microstructure are increased, and the resistivity is slightly decreased.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.853-858
• /
• 1999

To investigate the effect of H2 flow rate and TMS[Si(CH3)4] concentration on synthesizing ultrafine ${\beta}$-SiC powder by vapor phase reaction the experiment was performed at 1100$^{\circ}C$ of the reaction temperature under the condition of 200-2000 cc/min of H2 gas flow rate and 1-10% of TMS concentration respectively. The shape of ${\beta}$-SiC particles synthesized was spherical and the size of particles decreased and the distribution of particles was more uniform with increasing H2 gas flow rate. In this case Si powders were coexisted with ${\beta}$-SiC Pure and ultrafine ${\beta}$-SiC powders without Si were obtained under the condition of above 2% of TMS concentration and below 1500 cc/min of H2 gas flow rate.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.225-232
• /
• 2009

For comprehensive understanding of the formation behavior of $\beta-Al_5FeSi$ phase in Al-Si-Cu alloys with the existence of Fe element, microstructure characterizations were performed using combined analysis of OM, SEM-EDS, XRD. Especially, experimental and predictive works on solidification events of $\beta-Al_5FeSi$ phase as well as other phases formed together with $\beta-Al_5FeSi$ have been carried out by using DSC analysis and Java-based Materials Properties software (J. Mat. Pro.). Primary and eutectic $\beta-Al_5FeSi$ phases were able to distinguish from each other on microstructures by their morphological features. Primary $\beta-Al_5FeSi$ phase was seen to have rough surface perpendicular to growth direction, indicating free attachment of solute atoms in liquid state. On the other hand, the eutectic $\beta-Al_5FeSi$ phase was formed with plain and straight surface during eutectic reaction together with $\alpha$-Al phase. The eutectic reaction of $\beta-Al_5FeSi$ and $\alpha$-Al phases was seen to be able to separate into each formation depending on cooling rate.