• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.290-293
• /
• 2003

Ohmic contact characteristics of Al ion implanted n-type SiC wafer were investigated. Al ions implanted with high dose to obtain the final concentration of $5{\times}10^{19}/cm^3$, then annealed at high temperature. Firstly, B ion ion implanted p-well region were formed which is needed for fabrication of SiC devices such as DIMOSFET and un diode. Secondly, Al implanted high dose region for ohmic contact were formed. After ion implantation, the samples were annealed at high temperature up to $1600^{\circ}C\;and\;1700^{\circ}C$ for 30 min in order to activate the implanted ions electrically. Both the inear TLM and circular TLM method were used for characterization. Ni/Ti metal layer was used for contact metal which is widely used in fabrication of ohmic contacts for n-type SiC. The metal layer was deposited by using RF sputtering and rapid thermal annealed at $950^{\circ}C$ for 90sec. Good ohmic contact characteristics could be obtained regardless of measuring methods. The measured specific contact resistivity for the samples annealed at $1600^{\circ}C\;and\;1700^{\circ}C$ were $1.8{\times}10^{-3}{\Omega}cm^2$, $5.6{\times}10^{-5}{\Omega}cm^2$, respectively. Using the same metal and same process of the ohmic contacts in n-type SiC, it is found possible to make a good ohmic contacts to p-type SiC. It is very helpful for fabricating a integrated SiC devices. In addition, we obtained that the ratio of the electrically activated ions to the implanted Al ions were 10% and 60% for the samples annealed at $1600^{\circ}C\;and\;1700^{\circ}C$, respectively.

• Korean Journal of Poultry Science
• /
• v.30 no.4
• /
• pp.289-299
• /
• 2003

Effects of various combinations of corn oil (CO) and perilla oil (PO) as respective dietary sources of ${\omega}$-6 and ${\omega}$-3 polyunsaturated fatty acids on fatty acid profiles of immune organs were studied in young chicks. Seventy-five 1-day-old male (ISA Brown) chicks were assigned to five treatments with three replications. Semi-purified-type diets containing glucose and soybean meal as major ingredients were added with 8% CO, 6% CO+2% PO, 4% CO+4% PO, 2% CO+6% PO and 8% PO and fed for 7 weeks. There were no significant differences in body weight gain, feed intake and relative weights of liver and immune organs (g/100g weight) among dietary groups. Dietary fatty acid patterns were generally reflected in the fatty acid compositions of all immune organs such as spleen, thymus and bursa of Fabricius. The levels of a-linolenic acid(LNA), eicosapentaenoic acid (EPA) and docosahexaenoic acid in various immune organs increased with increasing levels of perilla oil in the diets, whilet the levels of linoleic acid (LA) and arachidonic acid (AA) decreased. Thymus appeared to have capacity to retain remarkably higher (P<0.05) levels of LA and LNA up to 37 and 22%, respectively, compared to the other organs. Thymic tissue contained ${\omega}$-3 fatty acid and ${\omega}$-6 fatty acid 10~36 times and 3~5 times higher than the other organs, respectively. Spleen tissue was specifically higher (P<0.05) in the levels of AA and EPA and the ratios of AA/LA and EPA/LNA, compared to the other organs, suggesting that the tissue might have high desaturase activity to convert LA or LNA to AA or EPA, respectively. BSA antibody production tended to increase by 18 ~ 32% with higher levels of perilla oil in diet, although the increase was not statistically significant. In conclusion, fatty acid compositions of immune organs very depending on the lipid composition of the diets and each organ appears to respond differently for its fatty acid profile to dietary lipids. Considering AA and EPA are precursors of many important eicosanoids, further studies are required to clarify the responses of the immune organs to the dietary fatty acids.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.30-34
• /
• 2016

We investigated magnetic field, discharged voltage, and as-deposited film uniformity at facing targets sputtering (FTS) system with magnetic field type: i) concentrated and ii) distributed magnetic field type. And Al doped ZnO (AZO) films were prepared at two magnetic field type such as concentrated magnetic field type and distributed magnetic field type, respectively. Discharge voltage at the distribution type is lower than concentration type due to low magnetic flux (middle magnetic flux: Concentration 1200 G and Distribution 600 G). The films deposited at the distributed magnetic field were more uniform than concentration type. All of prepared AZO films had a resistivity of under $10^{-4}[{\Omega}{\cdot}cm]$ and a transmittance of more than 85 % in the visible range.

• Food Science of Animal Resources
• /
• v.34 no.5
• /
• pp.622-629
• /
• 2014

The present study was conducted to compare the growth performance, carcass characteristics, and meat quality of the egg-type male growing chicken (EM), white-mini broiler (WB), and commercial broiler (Ross 308, CB). A total of 360 1-d-old chicks were reared together using a completely randomized design with 4 replicates for each group under the identical feeding and rearing conditions. The ADG and gain:feed were the highest in CB, intermediate in WB, and the lowest in EM (p<0.05), and the live and carcass weights of CB and EM were significantly higher than those of WB (p<0.05). The pH of breast meat from WB and CB was significantly higher (p<0.05) than that from EM with a similar body weight. The EM had the lowest moisture (p<0.05) and the highest protein content (p<0.05), whereas the fat and ash contents were not different among groups. The mystiric acid (C14:0), palmitoleic acid (C16:1 ${\omega}7$), and oleic acid (C18:1 ${\omega}9$) levels were significantly higher in breast meat from CB (p<0.05). The monounsaturated fatty acid (MUFA) content showed the highest (p<0.05) levels in CB. In contrast, the polyunsaturated fatty acid (PUFA) contents of breast meat, including linoleic acid (C18:2 ${\omega}6$) and arachidonic acid (C20:4 ${\omega}6$), were higher (p<0.05) in EM and WB than in CB. In conclusion, the EM and WB had less growth performances in comparison with CB, but they each had some unique features (taste, flavor, and physiological characteristics) when raised under the identical rearing and feeding conditions.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.282-287
• /
• 2003

″H″ type resonator has the advantage for the miniaturization of high-T7 superconducting (HTS) microstrip antenna in comparison with the conventional microstrip antenna such as rectangular type or circular type. In this paper we designed miniaturized HTS antennas using this "H"-type resonator and reported the characteristics of our antennas including return loss, bandwidth, radiation patterns, efficiency and so on. To fabricate the "H" type antenna, HTS YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between 50 $\Omega$ feed line and HTS radiating patch. The ″H" type superconducting antenna showed the performance of 1.38 in SWR, 26 % in efficiency, and 13.8 dB in the return loss superior to the normal conducting counterpart.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.205-205
• /
• 2009

As a p-type semiconductor NiO is potential material which can be used in many application including QD-LED. NiO films were deposited on glass substrates using rf-sputtering method. The properties of resistivity, surface roughness, etc in the NiO films were investigated at different sputtering parameters. The resistivity of $l.88{\times}10^{-2}{\sim}3.71{\times}10^{-2}{\Omega}cm$ with sputtering power(80~200 watts) and change was very low. The sputtering pressure at 3~60 mTorr resulted in rather broad change ofresistivity of $0.58{\times}10^{-2}{\sim}4.67{\Omega}cm$. The oxygen content in sputtering gas was found to be very effective to control the resistivity from $2.01{\times}10^{-2}$ to $1.22{\times}10^2{\Omega}cm$ with 100~2.5% $O_2$ in Ar gas. In addition, the surface roughness showed the RMS values of 0.6~1.1 nm and the dependence on sputtering parameters was weak.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.325-331
• /
• 2018

This paper deals with the dynamical analysis of a vessel that leads to capsize in regular beam seas. The complete investigation of nonlinear behaviors includes sub-harmonic motion, bifurcation, and chaos under variations of control parameters. The vessel rolling motions can exhibit various undesirable nonlinear phenomena. We have employed a linear-plus-cubic type damping term (LPCD) in a nonlinear rolling equation. Using the fourth order Runge-Kutta algorithm with the phase portraits, various dynamical behaviors (limit cycles, bifurcations, and chaos) are presented in beam seas. On increasing the value of control parameter ${\Omega}$, chaotic behavior interspersed with intermittent periodic windows are clearly observed in the numerical simulations. The chaotic region is widely spread according to system parameter ${\Omega}$ in the range of 0.1 to 0.9. When the value of the control parameter is increased beyond the chaotic region, periodic solutions are dominant in the range of frequency ratio ${\Omega}=1.01{\sim}1.6$. In addition, one more important feature is that different types of stable harmonic motions such as periodicity of 2T, 3T, 4T and 5T exist in the range of ${\Omega}=0.34{\sim}0.83$.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.238-244
• /
• 2010

In this paper, we studied electrical characteristics of internal converter type of LED lamps for road and street lighting. We surveyed electro-technical regulations and KS(Korean industrial standards) about LED luminairs. Waveforms of voltage and current, thermal distributions, insulation resistances between live parts and exposed conductive parts, and flame test of cover of LED lamps were experimented and analyzed. In regulations, insulation resistance between live conductors and exposed conductive parts should be greater than $0.2M{\Omega}$ in case nominal voltage of wiring is 220V. In KS codes, the value of insulation resistance should be greater than $2M{\Omega}$ while applying DC 500V or DC 100V. In the result of this study, waveforms of primary voltage and current were distorted. There was difference in waveforms of secondary voltage and current according to composition of converter. Mostly, insulation resistances were measured high more than regulation and code value but some measured points were measured badly($0.0M{\Omega}$). Cover of LED lamps was ignited easily. We expect that the results of this study would be helpful for revision of regulations and national codes for the electrical safety of LED road and street lighting.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.90-93
• /
• 2004

In this work, we have used different techniques for the surface passivation: conventional thermal oxidation (CTO), rapid thermal oxidation (RTO), and plasma-enhanced chemical vapour deposition (PECVD). The surface passivation qualities of eight different single and combined double layer have been investigated both on the phosphorus non-diffused p-type FZ silicon and on phosphorus diffused emitter of 100 ${\Omega}/Sq$ and 40 ${\Omega}/Sq$. In the single layer, silicon dioxide $(SiO_2)$ passivates good on the emitter while silicon nitride (SiN) passivates better than on the non-diffused surface. In the double layers, CTO/SiN1 passivates very well both on non-diffused surface on the emitter. However, RTO/SiN1 and RTO/SiN2 stacks are more suitable for surface passivation in solar cells caused by a relatively good passivation qualities and the low optical reflection. Applying these stacks in solar cells we achieved 18.5 % and 18.8 % on 0.5 ${\Omega}$ cm FZ-Si with planar and textured front surface, respectively. The excellent open circuit voltage $(V_{oc})$ of 675.6 mV is obtained the planar cell with RTO/SiN stack.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.58-63
• /
• 2005

The estimation of springing responses for recent ships is carried out, and application to a ship design is described. To this aim, springing effects on hull girder were re-evaluated, including non-linear wave excitations and torsional vibrations of the hull. The Timoshenko beam model was used to calculate stress distribution on the hull girder, using the superposition method. The quadratic strip method was employed to calculate the hydrodynamic forces and moments on the hull. In order to remove the irregular frequencies, we adopted 'rigid lid' on the hull free surface level, and addedasymptotic interpolation along the high frequency range. Several applications were carried out on the following existing ships: The Bishop and Price's container ship, S-175 container ship, large container, VLCC, and ore carrier. One of them is compared with the ship measurement result, while another with that of the model test. The comparison between the analytical solution and the numerical solution for a homogeneous beam-type artificial ship shows good agreement. It is found that Most springing energy comesfrom high frequency waves for the ships having low natural frequency and North Atlantic route etc. Therefore, the high frequency tail of the wave spectrum should be increased by $\omega$$\^{-3}$ instead of $\omega$$\^{-4}$ or $\omega$$\^{-5}$ for the springing calculation.